User Manual

Model: 2416

Product Overview

This document provides instructions for the 2416 Luxury 24" Modern Farmhouse Kitchen Sink. The sink is finished in White, Glazed.

Dimensions:

Length: 23-3/4" (605mm)
Width: 16" (408mm)
Height: 7-7/8" (200mm)
Drain Hole Diameter: 7/8" (22mm)

Important Note: Please do not return this product to the store. For any concerns, please contact our technical support team.

Attention Installer

Installation by a professional installer is recommended.
Inspect the sink and box contents upon delivery for any damages or missing parts.
Due to variations in the hand-crafting process, cutout templates are not provided. Use the actual sink for countertop cutout.
Discuss the desired installation method with the customer prior to installation. The manufacturer is not responsible for improper installation or damage.
Sinks are heavy; use assistance when lifting to avoid injury.
Observe all local plumbing and building codes.

Materials and Tools Needed:

Plumber's Putty
Silicon Caulk
Pencil
Level
Framing Square
Tape Measure
Drill
Jigsaw or Keyhole Saw
Safety Glasses

Installation Options:

The sink can be installed in three ways, depending on customer preference:

Undermount: Sink is installed below the countertop.
Flush-mount: Sink is level with the countertop.
Raised: Sink is installed above the countertop.

Base Cabinet Preparation and Support Frame

Custom cabinetry or modification of stock cabinets is required for proper fit and support.
A solid wood SUPPORT FRAME must be constructed under the sink, capable of holding up to 300 lbs. Avoid cabinets made of MDF particle boards. Consult a professional carpenter or cabinet maker.
The sink may extend up to 1-1/4" beyond the front face of the cabinet.
Build the support frame using solid hardwood (e.g., 2x4s), with support bars running front-to-back and a cross bar at the front. An additional cross-bar can be added at the back.
If cabinet sidewalls are weak, install vertical legs from the support frame to the floor.
Secure a 3/4" thick plywood platform on top of the support frame. Make cutouts for the sink drain or garbage disposal. Ensure clearance for faucet water supply lines.
For undermount installation, the sink rim should be level and flush with the top surface of cabinet sidewalls. Use shims if necessary to ensure proper leveling for water drainage.

Diagram Description: A diagram shows a sink installed in a cabinet with a solid wood support frame and a 3/4" plywood platform. Labels indicate 'Water Lines', 'Sealant', 'Solid Wood support frame', '3/4" Plywood Platform', and 'Clearance for drain'.

Countertop Preparation

Use the actual sink as a template for countertop cutout due to dimensional variations.
Countertop cutout can be customized. Recommended: 1/8"-1/4" positive reveal on sides and back. Options include zero reveal (flush fit) or 1/4" negative reveal (overhang).
Suitable countertop materials include granite, marble, quartz, cultured stone, or butcher block. Laminate countertops are not recommended.
Countertop preparation and cutout should be performed by a professional installer or fabricator.
After cutout, clean the bottom of the countertop and sink rim with denatured alcohol. Apply silicone sealant around the top edge of the sink (2 sides and back). Place countertop onto the sink. Remove excess silicone before it dries.

Reveal Options:

1/4" Positive Reveal: The countertop edge is approximately 1/4" back from the sink edge, exposing the sink rim.
Zero Reveal (Flush Fit): The countertop edge meets the sink edge, fitting flush with the sink bowl.
1/4" Overhang: The countertop extends 1/4" over the sink edge on all sides.

The sink is described as 'Very Durable & Leakproof'.

Strainer Installation Guide

Follow these steps for strainer installation:

Step 1: Disassemble the sink strainer. Place the upper strainer body and white gasket into the sink hole.
Step 2: Place the lower strainer and black gasket to connect to the upper part under the sink.
Step 3: Secure the upper and lower parts with screws.
Step 4: Connect the draintail-piece.
Step 5: Connect the trap. Run water and check for leaks.
Step 6: Insert the basket.

Installation tools are not provided. Please choose the appropriate installation tools.

Diagram Description: A series of six diagrams illustrate the steps for installing the sink strainer, showing the placement of parts and connections.

	Farmhouse Kitchen Sink Dimensions and Features Detailed dimensions and features of a farmhouse kitchen sink, highlighting its capacity and cabinet size requirements. Includes exterior dimensions, minimum cabinet size, and bowl depth.
	Stainless Steel Farmhouse Sink Dimensions and Specifications Detailed dimensions and specifications for a stainless steel farmhouse sink, including exterior and interior measurements, and minimum cabinet size requirements.
	30-Inch Stainless Steel Kitchen Sink Dimensions and Specifications Detailed dimensions and specifications for a 30-inch stainless steel kitchen sink, including bowl depth, drain opening, and overall measurements. Features a diagram illustrating the sink's layout and dimensions.
	33-Inch Stainless Steel Kitchen Sink Specifications Detailed specifications and dimensions for a 33-inch wide stainless steel kitchen sink, including exterior and interior measurements, bowl depth, drain opening size, and minimum base cabinet requirement.
	Stainless Steel Sink Dimensions and Specifications Detailed dimensions and specifications for a stainless steel sink, including length, width, depth, and minimum cabinet requirements. Features compatibility with garbage disposal units.
	Stainless Steel Kitchen Sink Dimensions and Features Detailed dimensions and features of a stainless steel kitchen sink, including its overall size, bowl dimensions, and drain opening specifications. Suitable for garbage disposal units.
	Stainless Steel Kitchen Sink Dimensions and Specifications Detailed specifications for a stainless steel kitchen sink, including exterior and interior dimensions, and minimum cabinet size requirements. Features a dual-basin design with precise measurements for installation.
	Modern Porcelain Sink with Single Right-Side Faucet Hole A versatile porcelain sink designed for modern living, featuring a 20-inch width, 9-inch depth, 8.25-inch height, and a single right-side faucet hole. This medium-sized sink is ideal for contemporary bathrooms.