Fast Wireless Charging Holder Instructions

What is included:

• Car wireless charging Bracket: A car mount assembly with a wireless charging pad and a suction cup base. (x1)
• 2M A-C Cable: A coiled USB-A to USB-C cable. (x1)
• Car Charger: A device that plugs into a car's cigarette lighter socket. (x1)
• Suction Cup Plate: A flat disc with an adhesive backing for dashboard mounting. (x1)
• Magnetic Ring: A thin metal ring with adhesive backing for non-MagSafe devices. (x1)
• Cable Ties: Small ties for securing cables. (x2)
• Cable Manager Holder: Clips for organizing cables. (x5)

Parameters:

The charging head has a dimension of 53.8mm.

Features a Type C charging interface.

Features:

• Fast charging with 15W output.
• Custom made magnet array, precisely compatible for all Qi compatible devices.
• 360 degree rotation for your optimal viewing angle.
• Package includes a high efficient Type C charging cable.

Product Specification:

Magnetic Charging Head:

Car Charger:

Note: The sticky metal ring does not stick well to textured, leather or liquid silicone phone cases.

Instructions:

Work for most phones and cases

1. For iPhone 12 series and newer, attach to the magnetic mount directly or with a MagSafe case.
2. For non-MagSafe compatible devices or cases, stick the magnetic ring to the center of the back of the case.

Assembly and Usage Instructions:

1. Peel off the protective film from the adhesive disc. Stick it onto the dashboard, then assemble the suction cup to the disc and engage the Suction Lock Lever. [Diagram shows peeling film, placing disc on dashboard, and attaching suction cup with lever.]
2. Connect the charging cable to the back of the charging head. [Diagram shows USB-C cable connecting to the charging head.]
3. Use two cable ties to secure the charging cable to the base support bar. [Diagram shows cable ties securing the cable to the mount's arm.]
4. Stick five cable manager holders along the dashboard to secure the charging cable. [Diagram shows cable clips being placed on the dashboard to route the cable.]
5. Plug the other end of the cable into the car charger, then insert it into the car's cigarette lighter socket. [Diagram shows the USB-A end of the cable plugged into the car charger, which is then plugged into a car socket.]
6. Put your phone on the holder. It will start charging automatically. [Diagram shows a phone magnetically attached to the charging head and charging.]

The pictures only supply the reference; please take the actual product as the standard.

Attentions:

1. Use the product as directed in the instructions.
2. Do not disassemble the product or expose it to fire or water to prevent leaks from electrical short circuits.
3. Avoid using the wireless charger in high-temperature, humid, or corrosive environments to prevent circuit damage and leaks.
4. Keep the wireless charger away from cards with magnetic stripes or chips (e.g., ID or credit cards) to avoid demagnetization.
5. Maintain a minimum distance of 20 cm between the wireless charger and implantable medical devices (e.g., pacemakers or cochlear implants) to prevent potential interference.
6. Store the wireless charger safely and keep it out of reach of children to avoid accidents.

FCC Statement:

FCC WARNING: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio / TV technician for help.

The equipment complies with FCC Radiation exposure limits set forth for an uncontrolled environment. The equipment should be installed and operated with a minimum distance of 20cm between the product and your body.