MITTZON Desk Frame Assembly Instructions

Step 1: Prepare the Frame

Identify the main frame components. The frame supports tabletops of 1600 mm (63"), 1400 mm (55 1/8"), or 1200 mm (47 1/4") width via its adjustable sliding mechanism.

Visual Description: The main horizontal beam with sliding metal tracks is shown. Arrows indicate the tracks can be extended or retracted for width adjustment.

Step 2: Attach Sliding Mechanisms

Secure the sliding metal tracks to the main horizontal beam using 8 screws (104875) and 8 smaller screws (101083).

Visual Description: Close-up shows screws being inserted through the sliding mechanism into the main beam.

Step 3: Attach Feet

Attach the adjustable feet to the bottom of the vertical legs, securing them with knobs (112762).

Visual Description: The base of the desk legs with feet being attached and adjusted via a knob.

Step 4: Attach Brackets

Fasten various brackets (100272, 10095882) to the frame structure for mounting other parts.

Visual Description: Brackets are shown being screwed onto different frame sections.

Step 5: Assemble Main Frame Structure

Connect the vertical leg assemblies to the main horizontal beam, ensuring correct alignment.

Visual Description: Vertical leg assemblies are attached to the central horizontal beam.

Step 6: Secure Frame Components

Use screws (101083) to fasten various parts of the assembled frame.

Visual Description: Close-ups show screws being tightened to connect frame elements.

Step 7: Attach Additional Frame Parts

Add further frame components as illustrated.

Visual Description: Additional horizontal or support pieces are shown being added to the frame.

Step 8: Mount to Tabletop

Position the assembled frame onto the underside of the tabletop. The frame is suitable for tabletops of 800 mm (31 1/8") or 600 mm (23 5/8") depth. Secure the frame using 4 screws (101083) and 4 nuts (104875).

Visual Description: The frame is placed on a tabletop, and screws are driven through the frame into the tabletop. Two tabletop depths are shown.

Step 9: Attach Cable Management Trays

Attach the cable management trays (10095808) to the underside of the desk frame.

Visual Description: Tray-like components are shown being slid or clipped into place under the desk.

Step 10: Secure Frame to Tabletop (Continued)

Further secure the frame to the tabletop using 8 screws (101083).

Visual Description: Close-up shows screws being tightened into the tabletop from the frame.

Step 11: Attach Control Unit Mounts

Attach the control unit mounts (100002) to the frame.

Visual Description: Small bracket-like components are shown being attached to the frame.

Step 12: Attach Control Box/Junction Box

Mount the control box or junction box using the specified hardware (10091465, 130852, 100825).

Visual Description: A central electronic component is mounted to the frame with screws and a plate.

Step 13: Attach Additional Components

Connect further components as illustrated.

Visual Description: Additional pieces are shown being connected to the frame.

Step 14: Secure Final Components

Fasten a specific frame part using 6 screws (101083).

Visual Description: Close-up shows screws fastening a final frame piece.

Step 15 & 16: Attach Cable Management Accessories

Attach the remaining cable management accessories (10095808, 10100658).

Visual Description: Final attachment of cable management trays and holders.

Step 17: Final Frame Assembly and Tilting

Complete the frame assembly. The diagram shows how to carefully tilt the desk frame, possibly for tabletop attachment or easier access. Two people are recommended.

Visual Description: The desk frame is tilted onto its side, with arrows indicating motion. Two people are depicted.

Step 18 & 19: Attach Cable Management Sleeves/Holders

Attach cable management sleeves or holders (10103527, 10103573) to the frame to organize cables.

Visual Description: Fabric-like sleeves are shown being attached to the frame to bundle cables.

Step 20 & 21: Desk Operation and Final Securing

The desk is ready for operation. Diagrams illustrate the height adjustment mechanism and final securing points. Ensure all connections are tight.

Visual Description: The desk is shown upright. Close-ups detail the height adjustment and final securing screws.

KOPPLA Accessory Assembly

Instructions for assembling the KOPPLA accessory, likely a power strip holder or cable organizer.

KOPPLA Steps:

1. Attach mounting brackets (10095882) to the desk frame.
2. Assemble the KOPPLA unit.
3. Attach the KOPPLA unit to the mounted brackets.
4. Connect power strip or cables into the KOPPLA unit.
5. Secure the KOPPLA unit to the frame.

Visual Description: Diagrams show the assembly of a separate accessory for cable management or power strip integration onto the main desk frame.