GPS + Smart Connect - Quick Start Guide
Follow these instructions to pair a Lezyne Smart Connect LED to a compatible Lezyne GPS computer.
To customize your Smart Connect lights beforehand, view the LED Ally app video tutorial.
Step 1: Select Smart Connect
Select "Smart Connect" from the Main Menu on your Lezyne GPS computer.
[Description of GPS screen: Main Menu with options like Alert, Auto, Bike, Smart Connect, Personal, Records, Phone, Navigation, Sensors, Screen, Time]
Step 2: Choose Light Configuration
Choose "Combo", "Front", or "Rear".
(Note: If the Front and Rear lights are linked, they will only appear under the "Combo" option. To link a combo, use the Lezyne LED Ally app.)
[Description of GPS screen: Smart Connect menu showing "Combo", "Signal: ****", "Front", "Rear"]
Step 3: Scan for Lights
Let the GPS scan for lights.
(Note: If the light(s) are currently paired with another GPS device or the LED Ally phone app, they will not appear. Disconnect or move away from signal range first.)
[Description of GPS screen: "Smart Connect" menu showing "Scanning" and "Press to Cancel"]
Step 4: Select Light to Pair
Select the light you want to pair with.
[Description of GPS screen: "Smart Connect" menu showing "KTV Pro Smart Rear", "Signal: ****"]
Step 5: Pairing Complete / Reconnect
Your light(s) are now paired.
To connect a different light, go back to the Smart Connect page, click the "[Press to Disconnect]" option first, and then start the pairing process over again.
[Description of GPS screen: "KTV Pro Smart Rear" listed as "Paired"]
Note on Reconnection
When turning your GPS device back on, you will be asked to reconnect to your lights. This is necessary so the device does not unknowingly power on your Smart Connect lights.
[Description of GPS screen: A prompt with a warning icon ⚠️, "Connect and power on Smart Connect LEDs?", followed by "Yes" and "No" options.]
Post-Connection Information
Once connected, a "Smart Connect" page will be available in the GPS's main page carousel.
(Note: In some cases, only 4 sensors can be connected to a Lezyne GPS device at once. If you have too many sensors connected, please switch one to Ant+ or disconnect another sensor to use Smart Connect.)
Examples of Connected Devices
Example A: Connected Combo
[Description of Example A screen: Shows "LED MODE 1", "KTV Smart Front Blast" with status indicators and "on/off" and "mode" buttons. Below it, "KTV Pro Smart Rear Day Flash" with status indicators and "on/off" and "mode" buttons. Text labels describe: "Name of LED and current output mode." and "Click to cycle through LED modes."]
Example B: Connected Front or Rear
[Description of Example B screen: Shows "LED MODE 1", "KTV Pro Smart Rear Day Flash" with status indicators and "on/off" and "mode" buttons. Text labels describe: "Name of LED and current output mode."]
