User Manual for AZZA models including: OVERDRIVE CSAZ-807, Computer Case
Front: 1 x 200mm fan port (1x 200mm Addressable RGB fan included ). Top: 6 x 120mm/ 4 x 140mm fan ports. Sides: 6 x 120mm fan ports.
360 mm radiator or 6*120 mm fan ports on the sides Front I/O: Reset / Led / HD Audio / USB3.0*3 / Type C 200mm Addressable RGB Fan included
File Info : application/pdf, 11 Pages, 3.64MB
DocumentDocumentOVERDRIVE Model Model Name: Name: Specifications Type: Color: Top Panel: Max CPU Cooler Height: Max GPU Length: Max Cooling Tube Reservoir Length: Power Supply: Motherboard Compatibility: Expansion External 5.25" Drive Bays: Internal 2.5" Drive Bays: Internal 3.5" Drive Bays: Expansion slots: Front Ports: Physical Specifications Metal Chassis Dimensions (HxWxD) Weight: Features Outer Appearance: Available Fan Ports: Water Cooling: Isolated Chamber: Easy Installation Cooler: Accessories OVERDRIVE CSAZ-807 ATX Tower 1.5~2.0mm SPCC+ 2.5mm Aluminum Aluminum and tempered glass wing Up to 80mm Up to 400mm long Video card (Horizontal) UP to 300mm ATX <305x280mm E-ATX ATXMicro ATX Mini ITX 0 Up to 2 Up to 2 (Convertible with 2.5"SSD x 2 ) 2 3xUSB 3.0 HD AudioType CMetal power button 440x570x590mm/17.3x22.4x23.2 inch 15kg /33.1lbs All external panels are made of aluminum with two glass top panel, gull-wing panel design makes it easy to adjust and clean on usually. Front: 1 x 200mm fan port (1x 200mm Addressable RGB fan included ) Top: 6 x 120mm/ 4 x 140mm fan ports Sides: 6 x 120mm fan ports Top: Supports radiators up to 280/360mm x 1 Sides: Supports radiators up to 360mm x 2 ATX Power supply inside its own isolated chamber, preventing its heat from affecting other components A pre-cut hole for easy installation of CPU Cooler, eliminating the need to remove the motherboard Radiator bracket x 2 - Support 280/360mm on top two sides. 30cm PCI-E 3.0 extension cable for VGA card(Support EATX ATX MB) AZZA Hub x1 360 mm radiator or 6*120 mm fan ports on the sides 200mm Addressable RGB Fan included Front I/O: Reset / Led / HD Audio / USB3.0*3 / Type C Install Reservoir/Pump Combo A A You can choose either side to install graphics card or additional radiator A Graphics card rubber holder: Before installing the graphics card, please stick the rubber holder. (Graphics card rubber holder in the tooling package) Supports up to 280 mm or 360 mm radiator Graphics card length up to 400 mm / 3 slots Motherboard Installation Power Supply Installation Disk Drive Mounts on both sides: Four 2.5" drives or Two 3.5'' drives Rear Wing Covers Slide into cut-out Screw to secure 4 Pin PWM SATA power connector 3 Pin Addressable RGB 2 pin connector to Reset(or LED) Switch Ports and connectors 1.) 7x3 pin ARGB portssupports ARGB devices: ARGB fan, ARGB strips...etc 2.) 6x4 pin PWM fan ports 3.) 1x2 pin connector to Reset (or LED) switch 4.) 1xSATA power connector 5.) 1x3 pin ARGB connector to MB 6.) 1x4pin PWM fan connector to MB Functions: 1.) Total of 17 lighting modes 2.) Lighting modes can be controlled by Reset (or LED) switch, or can be controlled by MB. (Hold the LED button for 3 seconds to switch the RGB control function between motherboard RGB software and LED button) A.) Magnet on the back of the hub box or using velcro on the back of the hub box, it can put in any place inside the metal part of the case. B.) 6 sets of ARGB port next to PWM port to ease the connection on fans $ $ $ $ + 300 mm PCI-E 3.0 Cable(Support EATXeATX Motherboard)Adobe PDF library 10.01