KickAss Customer Support Portal
User Guide for KICKASS models including: KAPHUB-700 Lithium Power Station, KAPHUB-700, Lithium Power Station, Power Station, Station
KickCharge 1200 Lithium Power Station - User Manual
KickCharge 700 Lithium Power Station - User Manual
KickAss KickCharge 1200 Lithium Power Station - 1200W, 78.7Ah @ 12.8V – KickAss Products
File Info : application/pdf, 14 Pages, 2.14MB
DocumentDocumentKICKCHARGE ACDC PORTABLE POWER STATION OWNER'S MANUAL KAPHUB-700 / KAPHUB-1200 V1.3 TABLE OF CONTENTS WARNING AND SAFETY INFORMATION ----------------- 1 PRODUCT SPECIFICATIONS ----------------------------- 2 INCLUDED COMPONENTS -------------------------------- 3 PRODUCT FEATURES ------------------------------------ 4 PRODUCT OVERVIEW ------------------------------------ 5 UNDERSTANDING YOUR POWER STATION ------------ 5 LCD DISPLAY ------------------------------------------- 6 CHARGING THE POWER STATION --------------------- 7 USING THE POWER STATION ---------------------------- 8 TROUBLESHOOTING ------------------------------------- 10 CLEANING INSTRUCTIONS ------------------------------ 11 WARRANTY & SUPPORT INFORMATION ----------------- 11 WARNING AND SAFETY INFORMATION · Read the user manual carefully before using the product. · DO NOT use this product near a heat source such as a fire, a heater, or a furnace. · Avoid contact with liquids of any kind. DO NOT operate the product in damp environments, or expose it to moisture. · DO NOT operate the product with a damaged cord or plug, or a damaged output cable. · DO NOT use the product around strong static electricity or magnetic fields. · DO NOT disassemble in any way or puncture the product with sharp objects. · To reduce the risk of damage to the electric plug and cord, pull the plug rather than the cord when disconnecting the product. · This product must only be used by competent adults. Do not let children use the product. · Store the product in a dry and ventilated place. · Fully charge the product before first use, or if it has been left unused for an extended period. · To maximise battery life, fully charge the product every three months. · The power station supports charging and discharging simultaneously. 1 PRODUCT SPECIFICATIONS Battery Capacity Cell Type AC Output USB-C PD Output USB-A QC3.0 Output Cigarette Lighter Output DC 5521 Output Wireless Charging Output LED Light Power DC/Solar Charging Input AC Charging Input Working Temperature Weight (net weight) Product Dimensions (mm) Product Certifications KAPHUB-700 KAPHUB-1200 582Wh / 22.4V 26Ah 1008Wh / 22.4V 45Ah LiFePO4 700W (continuous) 1200W (continuous) 100W Max 18W Max x 3 12V / 10A 12V / 5A x 2 10W Max 5W x 2 12-55V / 12A (240W Max) 12-55V / 12A (400W Max) 300W Max 500W Max -15~45°C 8.7kg 9.5kg 328 x 221 x 263 IEC 62133-2:2017 IEC 62619: 2022 EN 55032 AS/NZS 62368.1:2022 2 INCLUDED COMPONENTS POWER STATION SHOULDER CARRY STRAP AC POWER CABLE AUS 3-PIN TO IEC C13 CABLE DC POWER CABLE MINI ANDERSON-STYLE TO CIGARETTE PLUG CABLE SOLAR POWER CABLE MINI ANDERSON-STYLE TO MC4 CABLE 3 PRODUCT FEATURES · Compact and portable AC and DC power. · Carry handle and shoulder strap included. · Uninterruptable Power Supply Mode. · Automatic wireless charging pad. · True 100W USB-C PD outlet. · Dedicated 18W USB-A QC3.0 outlets. · Built-in LED lights. · Able to be charged from AC, DC or solar. Cables included. · LCD Display with live data. 4 PRODUCT OVERVIEW UNDERSTANDING YOUR POWER STATION 1 2 3 4 7 1. LED Light 2. 12V Cigarette Lighter 6 Output 3. DC5521 output ports 4. AC Output 5 5. USB-C PD and USB-A QC 3.0 Output 6. LCD Display 7. Wireless Charging Pad 8. DC and Solar Charging Input 9. AC Charging Input 8 9 10. Power Button 10 11. USB Port Power Button 11 12. LED Light Control Buttons 12 13. AC Port Power Button 14. DC Port Power Button 14 13 5 LCD DISPLAY A INPUT W OUTPUT W J 8888 188% 8888 B I C H DC AC D G USB UPS K F E A. Remaining Battery Percentage B. Output Power C. LED Light D. AC Output E. UPS Status F. Overload, Over Temperature and Short Circuit Warning G. USB Output H. 12V Cigarette Lighter Output and DC 5521 Output I. LED Light J. Input Power K. Wireless Output 6 CHARGING THE POWER STATION The KickCharge AC/DC Portable Power Stations can be charged in three ways. Charging from 240V AC AUS 3 pin to IEC C13 cable included Approximately 2 hour charge time. Charging from solar (unregulated solar) Mini Anderson-style to MC4 cable included approximately 3 hour charge time at 240W. Charging from vehicle/DC source Mini Anderson-style to cigarette plug cable included approximately 6.5 hour charge time. 7 USING THE POWER STATION Turning On/Off · Turn on the power station by holding the power button for three seconds. · Turn off the power station by holding the power button until the unit turns off. Operating AC, DC and USB outputs · To use AC output, short press the AC port power button to activate. · To use USB C or USB A output, short press the USB port outlet button to activate. · To use cigarette or DC 5521 output, short press the DC port power button to activate. LED Lights The LED lights have 3 mode settings and can be controlled independently or together. To operate a single light: · Press one of the LED light buttons to turn the LED on. · Each press of the LED light button will change the set mode. · To turn the LED light off, cycle through the light modes until the LED light turns off. To operate both lights together: · Turn on each LED light by a single press of the LED light buttons. · Each press of a button will now control both LED lights together until one light turns off. AC Output · There are two AC outputs on the front of the power station which shares a total output power of 700W Max continuous. USB Output · There are 4 USB ports on the power station. · 1 x USB C PD 100W Max · 3 x USB A QC 3.0 18W Max per port · All the USB ports can work simultaneously at the rated capacity. 12V DC Output · There are 2 different DC outputs on the power station. · 1 x Cigarette Lighter output 12V 10A Max continuous. · 2 x DC 5521 output 12V 5A Max continuous per outlet. · The maximum continuous combined current output is 10A. 8 Wireless Charging Output · The power station's wireless charging automatically activates when a device is placed on the charging area and turns off when the device is removed. Cooling Fan · The power station uses an internal cooling fan to maintain appropriate operating temperature. · When experiencing a higher output load, the fan automatically activates. · During discharge and charge process, the fan will operate intermittently to regulate the internal temperature. · The fan typically starts when the AC circuit is activated to ensure proper operation. UPS (Uninterruptible Power Supply) Mode · The power station supports an Uninterruptible Power Supply (UPS) function. When the unit's battery is fully charged and it is connected to the grid via an AC charging cable, the battery will be bypassed. · In other words, any device plugged into the AC port will draw power directly from the grid rather than the battery. In the event of a power outage, this product can automatically switch to battery-powered mode within 10 milliseconds (10ms), ensuring continuous power supply to your connected devices without interruption. UPS (Uninterruptible Power Supply) Operation · As shown in the picture below, connect the power station between the wall socket and the intended power device, ensuring that the power station power is ON. · Quick press the AC power button, and turn on the connected device. Power will be taken directly from the AC wall socket. · When the power from the AC wall socket is cut off, it will automatically switch to battery-powered mode with 10 milliseconds (10ms). 9 TROUBLESHOOTING ERROR Not Turning on Not Charging No Outout - AC/DC/USB Displaying on LCD ACTION · Confirm the unit is charged. · Confirm the power button is being held in for 3 seconds. · Test the unit operation while connected to a power source. · Confirm the connected power source is operating correctly and supplying sufficient power. · If connected to solar, ensure the source voltage is between 12-55V. · Ensure the connector/s are securely connected to the power station. · Confirm the coinciding output indicator symbol on the LCD display is showing. · Confirm the cable/device is securely plugged in to the power station. · Check if the cable/device connected has a fuse and ensure it is in good condition. Overload, over-temperature or short circuit state detected. · Disconnect all loads and power supplies from the power stations If the power station has been used in a confined space, direct sunlight or for a prolonged period of time, allow it to cool before next use. If the error occurred when a device was connected, check: · The power draw rating of the connected device. · The condition of the connected device and cable to ensure there is no damage to cause a short circuit. 10 CLEANING INSTRUCTIONS · Ensure the power station is disconnected from the mains before cleaning. · DO NOT use sharp or hard objects to clean as they damage the surface of the product. · DO NOT use alcohol-based cleaning materials to clean the power station. · Use a dry cloth to clean the unit. If required, a lightly damp cloth can be used to spot-clean marks provided it is kept away from controls, displays, and ports. WARRANTY & SUPPORT INFORMATION Need help? For product support or to make a warranty claim, reach out to the KickAss Customer Service team at: support@kickassproducts.com.au. Alternatively, visit our Customer Support Portal at: https://supportportal.kickassproducts.com.au/ 11 KickAss is a registered trademark of KickAss Products Pty Ltd Designed & imported by KickAss Products Pty Ltd 39 Iris Place, Acacia Ridge, QLD 4110 Australia Made in China 12