Accel Portable Wireless Mouse and Pad Instruction Manual & Specifications

Product Overview

This document provides essential information for the Accel Portable Wireless Mouse and Pad, model number 7142-59. It includes setup instructions, key features, technical specifications, important safety precautions, and FCC compliance details.

Diagram Description

The accompanying diagram illustrates the Accel Portable Wireless Mouse. The top view shows the primary buttons and the scroll wheel. The underside view reveals the battery compartment, the slot for the USB receiver, and the mouse cover. Numbered callouts identify specific components:

1. Scroll Wheel: Used for scrolling through documents and web pages.
2. DPI Button: Allows adjustment of mouse sensitivity (DPI).
3. Motion Sensor: Detects movement for cursor control.
4. USB Receiver: Connects the mouse wirelessly to the computer.
5. Battery Compartment: Houses the AAA batteries.
6. Mouse Cover: Provides access to the battery compartment and USB receiver.

Features

Scroll Wheel
DPI Button
Motion Sensor
USB Receiver
Battery Compartment
Mouse Cover

What's Included

1 x Accel Portable Wireless Mouse
1 x Mouse Pad Storage Bag
2 x AAA Batteries
1 x Instruction Manual

Technical Specifications

DPI: 800-1200-1600 DPI
Frequency: 2405-2475 MHz
Speed: 1-2 Mbps
Operating System Compatibility: Windows 98/ME/2000/XP/Vista/Win7/Win 8/Win10/Mac

Instructions

1. Battery Installation

Remove the AAA batteries from their packaging.
Open the mouse's Battery Cover.
Place the batteries inside the compartment, aligning them according to the positive (+) and negative (-) indicators.
Replace the battery cover, pressing firmly until it clicks into place.

2. Wireless Receiver Installation

Remove the mouse cover (6) to reveal the USB Receiver (4).
Extract the USB receiver and insert it into an available USB port on your computer (notebook or PC).
Your computer should automatically detect the receiver and begin the wireless mouse installation process.
Once the mouse is fully installed, move it around on a flat surface while pressing the scroll wheel. This action will establish the connection with the wireless receiver.

Note: For desktop PCs, the distance between the mouse's operating area and the computer may affect connection stability. Using an extended USB cable is recommended to mitigate potential issues.

3. DPI Button Function

Press the DPI Button (2) to cycle through the available DPI settings: 800, 1200, or 1600 DPI.
This feature allows you to adjust the mouse's sensitivity, enabling faster or slower pointer movement as preferred.

Attention

Auto-Sleep & Power Saving: The device is equipped with an auto-sleep function. It will automatically enter a low-power sleep mode after a period of inactivity and will reactivate upon pressing any key.
Surface Operation: Optical mice may encounter operational difficulties on surfaces such as glass, black materials, or highly reflective surfaces. For the best performance, it is advised to use a mouse pad.

Safety Precautions

WARNING: When using this product, always adhere to basic safety precautions, including the following:

Read all instructions thoroughly before using the product.
To minimize the risk of injury, close supervision is required when the product is used by or near children.
Do not expose the device to moisture.
Do not use the device if it appears damaged or has been modified.
Damaged or modified batteries can exhibit unpredictable behavior, potentially leading to fire, explosion, or injury.
Do not attempt to disassemble the device. If service or repair is necessary, consult a qualified service professional. Incorrect reassembly can create risks of fire or injury.
Avoid exposing the device to fire or excessive temperatures. Exposure to fire or temperatures exceeding 212°F (100°C) may result in explosion.
Ensure that any servicing is performed by a qualified repair technician using only identical replacement parts. This measure is crucial for maintaining the product's safety.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is contingent upon the following two conditions:

This device must not cause harmful interference.
This device must accept any interference received, including interference that could lead to undesired operation.

Warning: Any changes or modifications not explicitly approved by the party responsible for compliance may void the user's authority to operate the equipment.

Note: This equipment has been tested and verified to comply with the limits for a Class B digital device, as per Part 15 of the FCC Rules. These limits are established to provide reasonable protection against harmful interference in residential installations. This equipment generates, uses, and can radiate radio frequency energy. If not installed and operated according to the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a specific installation. If this equipment causes harmful interference to radio or television reception, which can be identified by turning the equipment off and on, users are encouraged to attempt to correct the interference through one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation distance between the equipment and the receiver.
Connect the equipment to an outlet on a circuit that is different from the one to which the receiver is connected.
Seek assistance from the dealer or an experienced radio/TV technician.

(c) The provisions outlined in paragraphs (a) and (b) of this section do not apply to digital devices that are exempted from technical standards under the provisions of § 15.103.

(d) For systems that incorporate multiple digital devices, the statement specified in paragraph (a) or (b) must be included solely within the instruction manual for the main control unit.

(e) When the manual is provided in a format other than paper, such as on a computer disk or via the Internet, the required information may be included in that alternative format, provided the user can reasonably be expected to access it.

FCC ID and Origin

FCC ID: 2ABHA0106

MADE IN CHINA