Instruction Manual for KOK models including: 6EJCT13SR-NS, 6EJCT13SRNS, 2A9AE-6EJCT13SR-NS, 2A9AE6EJCT13SRNS, Smart CCT Slim Panel with RGB Night Light, Smart CCT Slim Panel, Slim Panel with RGB Night Light, RGB Night Light Slim Panel
Shenzhen KOK Technology Co., Ltd 6EJCT13SR-NS 2A9AE-6EJCT13SR-NS 2A9AE6EJCT13SRNS 6ejct13sr ns
File Info : application/pdf, 2 Pages, 2.41MB
DocumentDocumentSmart CCT Slim Panel with RGB Night Light Smart CCT Slim Panel with RGB Night Light Smart CCT Slim Panel with RGB Night Light Smart CCT Slim Panel with RGB Night Light Enter the seng status of single fixture. Oponal scene mode. The main light and auxiliary light can be selected for brightness. Segment dimming and do-not-disturb mode can be seed. Click " " in the top right to enter the setup interface. Smart CCT Slim Panel with RGB Night Light Smart Slim Panel with Night Light "Sign Up" to create an account. Sign up 02 Smart Slim Panel with Night Light Smart CCT Slim Panel with RGB Night Light Choose the scene, light adjustment and seng of group Click Create Scene Smart CCT Slim Panel with RGB Night Light 10 04 Click Save Warm Tips: Above connecon instrucon based on the basic version. It may vary if APP version update. Please follow up the actual version guideline. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure Information This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.Adobe Illustrator 24.0 (Windows) Adobe PDF library 15.00