Vive Mobility All-Terrain Knee Walker

Owner's Manual - Model: MOB1019

What's Included

A Front Frame
B Rear Frame
C Knee Pad
D Steering Column/Handle Bars (attached by wire to the Front Frame)
E Storage Bag
F 3x Screw Knobs

[Image: Diagram showing the components included with the All-Terrain Knee Walker: Front Frame (A), Rear Frame (B), Knee Pad (C), Steering Column/Handle Bars (D), Storage Bag (E), and three Screw Knobs (F).]

Overview

Vive Mobility is dedicated to providing helpful resources for using the All-Terrain Knee Walker. This manual offers guidance throughout your experience. For frequently asked questions, please visit vhealth.link/4e132.

Assembly Instructions

No Tools Required! For a visual guide, watch the instructional video at vhealth.link/8aa0b.

Pull the steering column of the Front Frame (A) to the vertical position. The silver pin in the tension lever assembly will lock the two sections together. [Image: A person kneeling, holding the steering column upright. A second image shows hands connecting the front and rear frames, with locking pins.]
Connect the Front Frame (A) to the Rear Frame (B) by inserting the male ends into the female ends. Push the frame pieces together until the locking pins engage and are secured.
Insert a Screw Knob (F) into the top of the frame above the locking pins and twist until fully tightened to secure the scooter wheelbase. [Image: Hands inserting a screw knob into the top of the frame.]
Pull the silver tension lever assembly up until the lever and the spring bolt are vertical and parallel to the steering column socket. [Image: Hands pulling the silver tension lever assembly upwards. A second image shows hands tightening a nut on the spring bolt.]
Pull the flat silver lever back down to apply tension to the folding hinge and stabilize the front end of the scooter. If tension is insufficient, lift the lever, tighten the nut at the bottom of the spring bolt by half a turn, and retry. Repeat as needed.
Attach the handlebars to the steering column. Ensure the brake line is not twisted around the bar. [Image: A person standing and holding the handlebars. A second image shows hands attaching the handlebars.]
Adjust the Handle Bars (D) to the desired height, aligning the holes for the Screw Knob (F). Secure the handlebars by twisting the Screw Knob (F) clockwise until fully tightened. [Image: Hands adjusting handlebar height. A second image shows the secured handlebars.]
Insert the Knee Pad (C) post into the receptacle on the Rear Frame (B). Lock the pad in place by inserting a Screw Knob (F) into the desired adjustable height hole, ensuring alignment, and twisting the knob clockwise until fully tightened. [Image: A person placing the knee pad onto the rear frame. A second image shows a hand inserting a screw knob to secure the knee pad.]
Secure the brake line inside the two fabric straps located on the top bar of the frame and the steering column. [Image: Hands securing the brake line in fabric straps.]
To attach the Storage Bag (E), locate the two hooks on the Front Frame (A) and the sleeve on the back of the bag. Insert the sleeve over the hooks. Attach the hook and loop fastener on the bottom of the bag to the steering column. [Image: Hands attaching the storage bag to the steering column.]

Operating Instructions

General Information

Position your injured knee and leg firmly and securely in the middle of the knee pad, using the entire length of the pad for support.
Stand as straight as possible while on the walker. Adjust the height of the handlebars and the knee pad for comfort.

To Lock the Brakes

For a video demonstration, follow the link: vhealth.link/8ddf7.

Pull the hand brake lever towards you to engage the brake.
With the lever pulled in, press the silver locking button down with your thumb.
Hold the button down while releasing your grip on the brake lever. The pin will hold the tension on the brake cable and lock the brakes in place.

[Image: Close-up of hands operating the hand brake lever and the silver locking button, with labels 'Pin' and 'Lever'.]

To Unlock the Brakes

Pull on the brake lever until the silver locking button pops out, releasing the tension on the brake cable and unlocking the brakes.

Folding the Steering Column

Lift the silver lever to release the tension in the folding hinge on the Front Frame (A).
Pull the spring bolt assembly to the left to unlock the folding hinge, and push the steering column back to fold the handlebars down.

Note: Removing the Knee Pad is optional. The handlebars can be tucked under the Knee Pad if desired.

[Image: Hands pulling the spring bolt assembly to unlock the hinge. A second image shows hands pushing the steering column down. A third image shows the folded knee walker.]

Specifications

Length: 31"
Width: 16.5" (at front wheels)
Handlebar Height: 35 - 43"
Wheels Diameter: 8"
Weight: 20.75 pounds
Knee Pad Length: 14"
Knee Pad Width: 7"
Knee Pad Adjustable Height: 18" - 24"
Maximum User Weight: 300lbs

Warning

[!] Always consult with your physician / therapist before use to determine proper adjustment and use. As with any new physical activity, common sense and practice are critical for the safe operation of the Knee Walker.

Be sure you are on a level surface with the brake lock engaged when mounting / dismounting the Knee Walker.
The hand brake is designed to maintain the Knee Walker in a stopped position. The hand brake is not intended to be used for stopping the Knee Walker while in motion. Using the hand brake while in motion may cause an abrupt stop and a loss of stability in the device.
Use caution when moving between floors / surfaces with different textures (e.g., moving from carpet to tile, or a concrete sidewalk to an asphalt street).
Do not hang anything from the frame of the Knee Walker, as it may tilt the device off-balance.
Do not adjust the screws / bolts on the device unless otherwise specified in the instructions.
Failure to properly secure the components will cause the Knee Walker to be unstable and difficult to control.

Warranty Information

[Image: Graphic shield logo with 'Vive Health' and '1 YEAR Guarantee' text.] You are protected by Vive Health's industry-leading guarantee and customer service.

	Vive Mobility Knee Walker MOB1007 Owner's Manual Comprehensive owner's manual for the Vive Mobility Knee Walker (Model MOB1007), detailing assembly, operation, specifications, and safety guidelines for users.
	Vive Mobility Knee Walker MOB1007 Owner's Manual Owner's manual for the Vive Mobility Knee Walker MOB1007, including assembly instructions, operating instructions, and specifications.
	Vive Upright Walker Owner's Manual MOB1033 Comprehensive owner's manual for the Vive Mobility Upright Walker (Model MOB1033), covering assembly instructions, usage guidelines, safety warnings, specifications, and customer support information.
	Vive Mobility MOB1029S Small Power Wheelchair Owner's Manual \| Assembly, Operation, Specs Comprehensive owner's manual for the Vive Mobility MOB1029S Small Power Wheelchair. Includes assembly instructions, operating guide, charging, troubleshooting, specifications, and maintenance tips.
	Vive Power Wheelchair MOB1029L Owner's Manual Owner's manual for the Vive Power Wheelchair MOB1029L, covering setup, operation, charging, troubleshooting, and specifications.
	Vive MOB1010 Rollator Owner's Manual This owner's manual provides instructions for the Vive MOB1010 Rollator, including assembly, folding, and safety warnings. Learn about the specifications and proper usage of your Vive Mobility Rollator.