Instruction Manual for ArmstrongFlooring models including: Scotia 15mm Wild Wood Tawny, Scotia 15mm, Wild Wood Tawny, Wood Tawny, Tawny

Elevate Your Work Space with Armstrong Wildwood Tawny – Armstrong Flooring

Zinc - Safeguard R11 Flooring - Armstrong Flooring AU

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized



File Info : application/pdf, 1 Pages, 174.51KB

Document Document

Installation Instructions Flooring Trims & Accessories
Scotia 15mm
To cover expansion gaps at walls/vertical surfaces. · Leave 10mm expansion (as per installation guides). · Install after floor is laid. Use a multi-tool to ensure correct
expansion gap if required. · Pin/Brad/Glue to wall or vertical surface at A, not to flooring. · Can also be used with Laminate Flooring
Endcap 40mm
To cover expansion gaps at junctions with carpet/doorways and adjacent to external doorways like sliding aluminium doors. · Leave 10mm expansion (as per installation guides). · Install after floor is laid. Use a multi-tool to ensure correct
expansion gap if required. · Glue to subfloor with non-foaming polyurethane adhesive at A · Hold in place with painters tape (and weights where required)
for 24 hours ­ no foot traffic whilst the adhesive cures.
T.Mould 45mm
To cover expansion gaps at doorways. · Leave 10mm expansion (as per installation guides). · Install after floor is laid. Use a multi-tool to ensure correct
expansion gap if required. · Glue to subfloor with non-foaming polyurethane adhesive at A · Hold in place with painters' tape (and weights where required)
for 24 hours ­ no foot traffic whilst the adhesive cures.
Stairnosing 114mm
To professionally finish stairs. Step 1: Remove underlay from risers and treads. Step 2: Cut riser to finish flush with tread height. Step 3: Measure and cut trends to finish flush with the
Stairnosing, with the tread lock tray under the Stairnosing edge at C. Step 3: Use non-foaming polyurethane adhesive (full coverage) to adhere the riser and tread to the staircase. Step 4: Use non-foaming polyurethane adhesive (full coverage) to adhere the stairnosing on both A and B surfaces. Step 5: Hold in place with painters' tape (and weights where required) for 24 hours ­ no foot traffic whilst the adhesive cures. Step 6: As the stairs are now fully glued, they can be finished at edges/junctions with a matching caulking compound.

A 15mm
16mm A
17mm A
C B A

Armstrong Flooring and the Armstrong Flooring logo are under license from AWI Licensing, LLC

December 2023