Zebronics ZEB-BS1H1000 Wired Barcode Scanner
User Manual
Product Overview
This document provides the user manual for the Zebronics ZEB-BS1H1000 Wired Barcode Scanner. The scanner is designed for efficient data capture in various environments.
The scanner is depicted as a handheld device with a black body, a grey grip, and a blue trigger button. It features a coiled cable extending from the bottom.
Features
- USB Interface
- 1D Scanner
- Trigger Operation
- LED Indicator
Specifications
| Specification | Details |
|---|---|
| Device Type | Handheld |
| Connectivity | USB |
| Barcode Dimension Support | 1D |
| Indicators | Buzzer, LED |
| Scan Rate | 200 scans/sec |
| Scan Angle | Pitch: ± 30°, Skew: ± 45°, Roll: ± 60° |
| Print Contrast Ratio | >25% |
| Resolution | 3.3mil |
| Light Source | 650nm LASER |
| Input Voltage | DC 5V |
| Housing Material | PVC |
| OS Compatibility | Windows 7, 8.1, 10, Linux, Mac |
| Cable Length | 2m |
| Product Dimension (WxDxH) | 65×86×165mm |
| Net. Weight | 120g |
Package Contents
- Scanner: 1 U
- Connector Cable: 1 U
- QR Code Guide: 1 U
Barcode Setup Options
Scan the following barcodes to configure the scanner:
- Display Version
- Low Tone
- Restore Defaults
- High Tone
- KB/USB (Default)
- Closed Voice
- UART 9600, No. 8, 1
- Low Volume
- Continuous Mode
- Medium Volume
- Key Trigger
- High Volume
- Key Delay
- Bit Error Rate 1/20 Million
Data Edit Settings
Configure data editing parameters by scanning these barcodes:
- Bit Error Rate 1/5 Million
- CR
- OFF ID
- Skip
- Add ID Front
- Tab
- Add ID Back
- CR + Skip
- Close UPC/EAN Extra Code
- Add STX Front
- UPC/EAN Add 2 Extra Code
- Add ETX Back
- UPC/EAN Add 2/5 Extra Code
- Disable Suffix
Language Settings
Select the desired language for the scanner's interface or output:
- UNITED STATES
- LATIN AMERICA
- FRANCE
- BELGIUM
- GERMANY
- NETHERLANDS
- BRAZIL
- HUNGARY
- SPAIN
- DENMARK
- ITALY
- UNITED KINGDOM
- SWEDEN
- UNIVERSAL
RS232 Setup Recommendation
Follow these steps for RS232 communication setup:
- Scan the RS232 setup barcode.
- Default settings: Baud rate 9600, data bit 8, stop bit 1, no parity bit.
- To use RS232 mode, connect the RS232 cable to the DB9 port of the device with power.
Configure RS232 parameters by scanning the relevant barcodes:
- Baud Rate 9600
- Baud Rate 14400
- Baud Rate 19200
- Baud Rate 57600
- Baud Rate 115200
- Data bit 8
- Data Bit 7
- Stop Bit 1
- Stop Bit 2
- No parity check
- Odd parity check
- Even parity check
Zebronics is an ISO 9001:2015 Certified Company.
Visit Zebronics online at www.zebronics.com.
