Installation Guide for Built-in Fridge-Freezer

Safety and Tools

Safety Precautions:

[read-manual-icon] Please read all instructions before beginning installation.
[gloves-icon] Wear protective gloves during installation.

Required Tools:

Torx T20 screwdriver
Pencil
Spirit level
Tape measure
Scissors ✂️
Drill with Ø 2 mm bit
Hammer ?

Parts Included:

2x small brackets/connectors
18x 4x15 T20 screws
3x mounting rails/brackets
4x brackets/connectors
4x M5x10 T20 screws
2x 4x12 T20 screws
2x M4x16 T20 screws
2x M4x14 T20 screws
4x mounting brackets
Electrical cable

General Information:

Ensure a minimum ventilation area of 200 cm².
The appliance door can open up to 90°.
Maintain a minimum clearance of 150 mm.
Appliance dimensions: Height ≥ 710 mm (750 mm).
Weight: 560 kg (Note: This value may represent a load capacity or a different unit).

Door Attachment and Adjustment

Follow these steps to attach and adjust the appliance doors:

Step 1: Prepare Cabinet and Hinges

Attach hinge mounting plates to the cabinet using the provided screws.

Diagram Description: Shows mounting plates being screwed into the cabinet frame.

Step 2: Attach Door Panels

Align the door panels with the appliance body and the pre-attached hinges.

Diagram Description: Shows door panels being positioned against the appliance.

Step 3: Secure Hinges to Door Panels

Connect the hinges to the door panels using screws. Ensure correct orientation.

Diagram Description: Shows screws being used to attach hinges to the door panels.

Step 4: Adjust Door Alignment

Use adjustment screws on the hinges to fine-tune the door position. This includes rotational adjustments and sliding adjustments to ensure proper alignment and gaps.

Diagram Description: Illustrates using screws to adjust door rotation and horizontal/vertical position. Shows a minimum gap of 2 mm between panels.

Step 5: Connect Cables

Connect any necessary electrical cables to the appliance or door mechanism.

Diagram Description: Shows electrical cables being plugged in.

Step 6: Secure Mounting Rails

Attach and secure the mounting rails to the cabinet and/or appliance as indicated.

Diagram Description: Shows rails being screwed or clipped into place.

Step 7: Final Checks

Ensure all panels are securely attached and aligned. Test the door opening and closing mechanism.

Diagram Description: Shows a final check with a checkmark ✔️ indicating successful installation.

Handle Installation

Attach the appliance handles to the door panels:

Diagram Description: Shows handles being positioned on the door panels.

Secure the handles using the provided screws. Ensure they are firmly attached.

Diagram Description: Illustrates screws being inserted and tightened to fix the handles.

Additional Installation Steps

Follow specific instructions for attaching various mounting brackets and rails to the appliance and cabinet.

Diagram Description: Shows detailed steps for attaching different types of rails and brackets, including drilling pilot holes (Ø 2 mm) and using screws. Some steps involve clicking components into place.

Ensure all components are correctly seated and secured, indicated by a 'CLICK' sound or visual confirmation.

Notes

This section is provided for user notes.

Diagram Description: A blank lined page.