Lypertek Z3 True Wireless Earbuds

What's Inside the Box

• Lypertek Z3 True Wireless Earbuds
• Charging Case
• S, M, L Silicone Ear Tips
• M Foam Ear Tips
• USB Type-C Cable
• Quick Start Guide
• Thank You Card

Device Layout

Earbuds (Left & Right):

• 1. LYPERTEK Z3 Indicator: LED light indicating status.
• 3. Multifunction Button (MFB): For controls like play/pause, calls, and voice assistant.
• 4. LYPERTEK Z3 Indicator: LED light indicating status.
• 5. Microphone: For calls and voice commands.

Charging Case:

• 2. Type-C Charging Port: For charging the case.
• Case LED Indicator: Shows the charging status of the case.

Diagram Description: The diagrams show the individual earbuds with their respective L/R markings, LED indicators, multifunction buttons, and microphones. The charging case is shown with its USB-C port and LED indicator.

Controls

On Earbuds:

• ▶️|| Play/Pause: Single press the multifunction button.
• ◀️ Previous Track: Double press the multifunction button on the left earbud.
• ▶️▶️▶️ Next Track: Double press the multifunction button on the right earbud.
• ➕ Volume Up: Triple press the multifunction button on the right earbud.
• ➖ Volume Down: Triple press the multifunction button on the left earbud.
• Answer/End Call: Single press the multifunction button.
• Reject Call: Press and hold the multifunction button for 1 second.
• Enable/Disable Voice Assistant: Press and hold the multifunction button for 2 seconds.

Charging

Charging the Case:

• Connect the USB Type-C cable to the charging port (2.) on the case and plug the other end into a power source (e.g., USB adapter, computer).
• The case LED indicator will show the charging status:
  • 0-25%: Red LED
  • 20-50%: Yellow LED
  • 50-75%: Green LED
  • 75-100%: Blue LED

Charging the Earbuds:

• Place the earbuds into the charging case. They will begin charging automatically.
• The earbud LED indicators will show charging status.

Diagram Description: The charging diagram illustrates connecting a USB Type-C cable to the case and shows the LED indicators for different battery percentage ranges. It also shows the earbuds being placed into the case for charging.

How to Pair

1. Take both Lypertek Z3 earbuds out of the charging case. They will automatically turn on.
2. Double-click the multifunction button on either earbud to enter pairing mode. The LED indicators will flash.
3. Enable Bluetooth on your smartphone or other device.
4. Search for available Bluetooth devices and select "[LYPERTEK] TEVI-L" or "[LYPERTEK] TEVI-R" to connect.
5. If prompted, confirm the Bluetooth pairing request.
6. Once connected, the earbuds will indicate they are paired.

Note: The connection interface for the other earbud may appear on your device; click to confirm if necessary.

Powering On and Off

Powering On:

• The Lypertek Z3 earbuds turn on automatically when removed from the charging case.
• Alternatively, press and hold the multifunction button on either earbud for 3 seconds to turn them on manually. A "beep" sound may indicate power on.

Powering Off:

• The Lypertek Z3 earbuds turn off automatically when placed back into the charging case.
• To turn them off manually, press and hold the multifunction button on either earbud for 3 seconds. A "beep" sound may indicate power off.