ARMODD iTag User Guide

Thank you for purchasing our product. Please read these instructions before use. The manufacturer is not liable for any damage caused by improper use.

Switching on/off the iTag

Gently hold down the side button for 3–5 seconds.

Short sound = iTag is switching on
Two beeps = iTag is switching off

Adding iTag to the application Find my iPhone

Switch on iTag by holding down the side button (it will make a short sound)
Open the application Find my Phone
From the lower menu select Items and click on +
Select Add a different item
Upon finding it, iTag will appear on the display – click on Connect
Name the item and click on Continue
Select Emoticon and click on Continue
Click on I agree
Click on Complete

If iTag cannot be found, switch it on by holding down the side button (it will make a short sound) and try to add it again following the steps above.

Changing the battery

If the iTag cannot be switched on by holding down the side button, change the battery (CR2032).

Press down the rear cover and while pressing carefully turn the rear cover in a counterclockwise direction
The detached rear cover can now be easily removed
Carefully remove the battery so as not to damage the battery's clips
Insert a new battery
Place the rear cover into the marked holes, clip it back, press down and carefully turn the rear cover in a clockwise direction

Important warnings, recommendations and FAQs

The product contains a battery. Do not expose it to flames or extreme temperatures due to risk of explosion.
Keep the product out of reach of children. It may contain small parts posing risk of inhalation.
Do not use the product if it is damaged in any way or if the battery is incorrectly inserted, or damaged.
Do not use the product in close proximity to explosives and chemicals.
Protect the product from falls or impacts; do not expose it to extreme temperatures or direct sunlight. These conditions may cause malfunctions, or they can cause irreparable damage. Keep the product at room temperature.
Prevent it from coming into contact with water. After the product comes into contact with water, dry it.

Safe disposal of the product

Do not dispose of the product in general waste as it may contain substances harmful to the environment.

[symbol: do not dispose in general waste]

Electronic waste

Leave the product at a dedicated electronic waste collection facility where its recycling or safe disposal is ensured. Contact your local municipality for a list of waste collection sites, or you can leave the used product with the seller.

Technical requirements

Telephone: iOS 14.5+

Frequency band: 2402–2480 MHz

Max. performance: 1.06 dBm

Declaration of conformity

ARMODD GmbH hereby declares that the ARMODD iTag device complies with Directive 2014/53/EU. The full version of the EU declaration of conformity is available at this website: www.armodd.com

Technical support

Technical support: info@armodd.com

Manufacturer: ARMODD GmbH, Königstraße 80, 70173 Stuttgart, Germany

	ARMODD Baze Smartwatch User Manual: Setup, Features, and Guide Get started with your ARMODD Baze smartwatch. This comprehensive guide covers charging, pairing, using features like calls, messages, sports tracking, health monitoring, and important FAQs. Visit www.armodd.com for more.
	Návod k použití a nastavení ARMODD Candywatch 5 GPS Komplexní průvodce nastavením, ovládáním a údržbou chytrých hodinek ARMODD Candywatch 5 GPS, včetně párování, funkcí a bezpečnostních informací.
	ARMODD Silentwatch 5 Pro - Návod k použití Komplexní návod k použití chytrých hodinek ARMODD Silentwatch 5 Pro. Seznamte se s funkcemi, nastavením a tipy pro optimální využití vašeho nového zařízení pro sledování zdraví, sportovních aktivit a každodenní komunikaci.
	EU Declaration of Conformity - ARMODD Prime 3 GPS Smartwatch Official EU Declaration of Conformity for the ARMODD Prime 3 GPS smartwatch, confirming compliance with directives 2014/53/EU and 2011/65/EU (RoHS), as issued by manufacturer SMARTOMAT s.r.o.
	ARMODD Silentwatch 7 Pro GPS User Manual and Quick Start Guide Concise and SEO-optimized guide for the ARMODD Silentwatch 7 Pro GPS smartwatch. Covers essential setup, charging, pairing with the GloryFit Pro app, device controls, and important usage notes. Visit www.armodd.com for full instructions.
	ARMODD Silentwatch 4 Pro User Manual Comprehensive user manual for the ARMODD Silentwatch 4 Pro smartwatch, covering setup, features, and operation.
	ARMODD Roundz 3 - Uživatelská příručka a návod k použití Kompletní uživatelská příručka pro chytré hodinky ARMODD Roundz 3. Zjistěte, jak nastavit, používat a spravovat vaše chytré hodinky, včetně funkcí, tipů a řešení problémů.
	EU Declaration of Conformity - ARMODD Titan GPS Official EU Declaration of Conformity for the ARMODD Titan GPS smartwatch, confirming compliance with relevant European Union directives and harmonized standards, issued by SMARTOMAT s.r.o.