SteelSeries Arctis 7+ Wireless Product Information Guide
Welcome to Arctis
Your new headset is the result of gaming expertise since 2001 and our unyielding pursuit of perfection. SteelSeries poured its heart into making the Arctis 7+, giving it the best gaming mic available, 7.1 surround sound, and comfort and style unlike anything you've experienced before. Arctis is our glory; now go chase yours.
SteelSeries GG
Download SteelSeries GG to customize your audio settings, setup ChatMix, use surround sound, and to integrate with Engine Apps like Discord. Visit steelseries.com/gg for more information.
Package Contents
- Product Information Guide
- Arctis 7+ Wireless Headset
- USB-C Wireless Dongle
- USB-C to USB-A Adapter Cable
- 4-pole 3.5 mm Audio Cable
- USB-C Charging Cable
System Compatibility
- PC
- Mac
- PlayStation 5
- PlayStation 4
- Nintendo Switch
- Android (with USB-C)
Product Overview
The headset features the following components:
- Ski Goggle Headband
- Airweave Ear Cushions
- Retractable Microphone
- Microphone Mute Button
- Volume Control
- Mobile Cable Jack
- Headphone Share Jack
- USB-C Charging Jack
- ChatMix Dial
- Power Button
- USB-C Wireless Dongle
- USB-C to USB-A Adapter Cable
- USB-C Charging Cable
- 4-pole 3.5 mm Audio Cable
Setup
Wireless Setup
Connection to USB-A or USB-C is possible. The headset is pre-paired with the dongle.
Wired Setup
Connect the headset using the 4-pole 3.5 mm audio cable.
For more detailed product information, visit steelseries.com/arctis-7x.
Charging
To charge the headset, connect the USB-C Charging Cable to the USB-C Charging Jack on the headset, and plug the other end into any USB power source.
The color of the Power Button indicates the battery level:
- Green: 100-50%
- Yellow: 49-20%
- Red: 19-10%
- Red (fast blink): 9-1%
Power On/Off
To power on the headset, press and hold the Power Button for 1 second. You will hear a tone, and the Power Button will illuminate.
To power off the headset, press and hold the Power Button for at least 3 seconds.
Pairing
Note: The headset is already paired with the Dongle out of the box. To re-pair the Dongle:
- Connect the USB-C Wireless Dongle to a Windows PC with SteelSeries GG installed.
- Use the USB-C Charging Cable to connect the headset to the same PC.
- Use Engine from SteelSeries GG software to initiate the pairing.
- Engine will show when pairing is completed.
Microphone
Retractable Microphone
Positioning
Position the ClearCast Microphone close to the corner of your mouth with the flat surface facing you.
Multimedia Control
- Answer/end voice call: single press Power Button 10
- Play/pause music: single press Power Button 10
- Next track: double press Power Button 10
- Previous track: triple press Power Button 10
Ski Goggle Headband
Installation
Adjust the direction of the headband.
Velcro
Tighten or loosen the Velcro straps on the side of the headband to achieve the desired fit.
ChatMix Setup
ChatMix Dial
Download and install SteelSeries GG, then run GG's first time audio setup. After finishing setup, the ChatMix Dial can be used to control the balance between how much you hear of the game audio vs chat audio from your voice communication application.
Regulatory Information
This section contains important regulatory and compliance information for the SteelSeries Arctis 7+ Wireless headset, including EU Declaration of Conformity, UK Declaration of Conformity, WEEE compliance, Turkey RoHS compliance, safety guidelines for lithium batteries, FCC statements, Industry Canada statements, and other regional compliance marks.
The headset operates in the 2.400 - 2.4835 GHz frequency band with a maximum radio-frequency power transmitted of 7.78 dBm (Headset ANT 1), 9.57 dBm (Headset ANT 2), and 9.32 dBm (Transceiver).
The device complies with FCC Part 15 rules and Industry Canada license-exempt RSS standard(s). It has been tested and found to comply with the limits for a Class B digital device.
The product is compliant with RoHS directives and other regional safety and environmental standards.