Installation Guide
3.1 Micro SD Card Installation Guide
Insert Micro SD Card
Push the Micro SD card into the slot until it is in place as shown in the illustration.
Remove Micro SD Card
Press the Micro SD card to eject it from the slot.
Memory Card Usage: Please ensure the correct insertion direction of the Micro SD card. Incorrect insertion may damage the device and the Micro SD card. Use a high-speed Micro SD card that meets SDHC specifications. High-speed Micro SD cards will have a C10 logo. This product requires a genuine Micro SD card with a C10 logo. It is recommended to use a storage card within the 16GB-128GB range.
Warm Tip: Before using a new card for the first time, please format it.
3.2 Recorder Installation Guide
- Wipe the area where the bracket needs to be installed with a clean, soft cloth to ensure the bracket can be firmly attached.
- Remove the recorder unit, tear off the protective film on the back adhesive, and attach the base with adhesive to the installation location. Then, fix the recorder in place as shown in the illustration.
- Adjust the angle of the recorder's lens part by moving it up and down. It is recommended to angle the lens slightly downwards to ensure the camera view is parallel to the horizontal ground.
3.3 Button Function Description
- Reset Button
- Emergency Button (Main Interface) / Back Button (Menu Interface)
- Front and Rear Camera Switch Button (Main Interface) / Forward Button (Menu Interface)
- Record Audio Switch Button (Main Interface) / Backward Button (Menu Interface)
- Menu Button (Main Interface) / Confirm Button (Menu Interface)
3.4 Indicator Light Description
| Indicator Light Color | Status | Status Description |
|---|---|---|
| Red | Off | Power Off |
| Solid | Power On, Not Recording | |
| Flashing | Normal Recording | |
| Blue | Off | Power Not Connected |
| Solid | Power Connected |
Note: Entering the menu interface will pause recording.
4 Main Function Description
Forward Collision Warning
The device uses internal algorithms to intelligently identify when the vehicle in front starts moving in congested traffic or at traffic lights, and provides a voice prompt.
Collision Monitoring
During driving, if the vehicle experiences vibration or collision, the device will automatically lock the video file of the current time period based on the set collision sensitivity (low, medium, high can be switched). These files are stored in the emergency recording folder. Note: Please back up important locked files promptly to prevent them from being overwritten.
Note: Formatting the memory card will delete locked files. Please back up locked files from the memory card regularly.
Fatigue Driving Reminder
The device uses internal algorithms to intelligently identify if the driver is in a fatigued state and provides a voice prompt.
Parking Monitoring
When the parking monitoring function is set, the device uses internal algorithms to intelligently identify if the vehicle is stopped. If an external collision occurs, it will automatically start recording.
Time-Lapse Recording
When the time-lapse recording function is set, the device uses internal algorithms to identify when the vehicle is stopped and starts time-lapse recording.
Note: Parking monitoring and time-lapse recording functions require an external step-down cable. Please choose a step-down cable with battery low-voltage detection and voltage conversion.
Important Reminder
The above functions are only for driving assistance or reminders and cannot replace the driver's judgment and operation. They also cannot eliminate the occurrence of accidents or violations. Please drive carefully.
Intelligent Voice Prompts
The device supports the following intelligent voice prompt functions:
- You have been driving for 1/2/4 hours, please rest.
- Please format the memory card.
- Recording is locked.
- Please insert memory card.
- Please replace memory card.
- Please connect to APP for time synchronization.
- Forward vehicle starting.
- Turn on headlights.
Voice Control
This product supports the following voice control operations. Use the following voice commands to operate the device:
- I want to take a photo.
- Lock video.
- Turn on audio recording.
- Turn off audio recording.
Warm Tip: This function requires audio recording to be turned on, and operates in APP disconnected mode. It only supports Chinese voice control.
Firmware Upgrade
After connecting the device to the APP, you can enter the settings interface to check for firmware updates. If there is an update, click confirm to update automatically. Do not disconnect the APP during the firmware update process.
5 APP Introduction
Scan the QR code below or search for "怡行护驾" in the app store to install the APP.
After turning on the recorder, open the APP. On the device page of the APP, click "Connect Recorder". The APP will automatically search for the recorder's Wi-Fi. Select "GoSure5101-Serial Number" from the Wi-Fi list to connect. (Default password: 12345678)
Special Note:
The "怡行护驾" APP is provided separately by a third party. Users should use the APP reasonably according to their agreement with the APP provider. For any APP-related issues, please contact the APP provider.
6 Disclaimer
The images and sound recordings by the safety recorder are for reference only. To the extent permitted by law, our company is not responsible for any indirect losses or consequential losses incurred by the user due to the safety recorder.
Special Note: The machine must be in normal recording working status to record video files. However, in the following situations, video files may be corrupted or lost:
- Removing the Micro SD card during recording may cause video file corruption or loss.
- The machine suffering destructive collision during recording may cause video file corruption or loss.
- During recording, a severe collision may cause the memory card to loosen, potentially corrupting video files or causing video file loss.
- The video recorded by the safety recorder is for reference only. Our company is not responsible for any corrupted files or data loss due to abnormal machine operation.
7 Common Problems and Solutions
| Fault | Cause & Solution |
|---|---|
| Unable to loop recording | Cause: Memory card is full. Solution: Format the memory card. Note: Back up important videos or photos before formatting. |
| Screen freezing | Cause: Micro SD card is not compatible. Solution: Check if the Micro SD card is a high-speed card with Class 10 speed and a capacity of at least 16GB. |
| Cannot take photos or record videos | Cause: Memory card has insufficient space. Solution: Format the memory card. Note: Before formatting, please back up important videos or photos. |
| Recording stops automatically | Due to large high-definition video data, please use a high-speed memory card compatible with SDHC. High-speed memory cards will have a C10 logo. |
| Prompt "File Error" | Memory card storage error occurred, resulting in incomplete files. Please format the memory card. |
| Image is blurry | 1. Please check the lens for dirt or fingerprints. Wipe the lens clean before shooting. 2. If there are still problems, please contact after-sales service. |
| Machine crashes | After a crash, press and hold the reset button to restart. |
Warranty Card
This product is designed with precision and has excellent quality. Under normal use and maintenance, it should perform excellently. This product is guaranteed for one year from the date of purchase (based on the purchase invoice). According to the following warranty terms, Lumileds will provide free warranty service to cardholders.
Warranty Terms:
- Warranty service is only valid for normal use. Any man-made damage, such as connecting to an improper power supply, using improper accessories, not following the instructions, improper use or negligence causing damage, improper installation, or damage caused by natural disasters, will immediately void the warranty service.
- Please bring the original warranty card and invoice for repair, and provide them to the retailer along with the product. Otherwise, the normal provision of warranty services cannot be guaranteed.
- If the warranty card and invoice are modified, warranty services will not be provided.
- Please contact the retailer where you purchased the product. This retailer will assist you in the product's warranty service.
- The company reserves the right to interpret these terms for users who do not comply with the above warranty terms.
The following information is to be filled in by the user:
(We will strictly keep this information confidential and use it only for repair contact purposes. Please fill in the detailed information accurately.)
Name:
Detailed Address:
Phone:
Postal Code:
The following information is to be filled in by the retailer:
Retailer:
Person in Charge:
Address:
Phone:
Model:
Serial Number:
(If the purchase date does not match the invoice date, or if there is no relevant information, it will be extended by one month from the factory date.)
The following information is to be filled in by Lumileds:
Fault Description:
1.
2.
| Warranty Date | Acceptance Date | Fault Phenomenon | Fault Cause | Repair Record | Repair Completion Date | Responsible Person |
|---|---|---|---|---|---|---|
Customer Service Hotline: 4006908826
Repair Voucher:
Provided to (Retailer Name) for one safety recorder.
Serial Number:
Recipient Signature:
Submitter Signature:
Date:
Repair Voucher:
Provided to (Retailer Name) for one safety recorder.
Serial Number:
Recipient Signature:
Submitter Signature:
Date:
Note: Please use this to claim the repaired product and return the voucher.
Product Hazardous Substance Name and Content
| Component Name | Hazardous Substances | |||||
|---|---|---|---|---|---|---|
| Lead (Pb) | Mercury (Hg) | Cadmium (Cd) | Hexavalent Chromium (Cr6+) | Polybrominated Biphenyls (PBB) | Polybrominated Diphenyl Ethers (PBDE) | |
| Outer casing | ○ | ○ | ○ | ○ | ○ | ○ |
| Lens | X | ○ | ○ | ○ | ○ | ○ |
| Circuit board and its components | ○ | ○ | ○ | ○ | ○ | ○ |
| Accessories | ○ | ○ | ○ | ○ | ○ | ○ |
This table is compiled in accordance with SJ/T 11364.
○: Indicates that the content of this hazardous substance in all homogeneous materials of this component is below the limit requirements specified in GB/T 26572.
×: Indicates that the content of this hazardous substance in at least one homogeneous material of this component exceeds the limit requirements specified in GB/T 26572.
10
Electronic and electrical products sold in the People's Republic of China will be marked with an "Environmental Use Period" indicator. The number in the circle represents the normal environmental use period of the product.
FCC Caution
§ 15.19 Labeling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
§ 15.21 Information to user.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
§ 15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
ISED Warning:
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
French:
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:
- l'appareil ne doit pas produire de brouillage, et
- l'utilisateur de l'appareil doit accepter tout brouillage radio électrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
The device has been evaluated to meet general RF exposure requirement. The device can be used in mobile exposure condition with 20cm distance
Lumileds is the warrantor of this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. 2021 © Lumileds Holding B.V. All rights reserved. 亮锐(Lumileds)为此产品提供质保。飞利浦(Philips)以及飞利浦盾牌为皇家飞利浦有限公司(Koninklijke Philips N.V.)的注册商标,皇家飞利浦有限公司许可亮锐使用。2021 © 亮锐公司(Lumileds Holding B.V.)版权所有。保留所有权利。
