Dragon Ball Z Popcorn Popper

Important Safeguards

⚠️ WARNING: To reduce the risk of fire, electric shock, or serious personal injury:

• Read all instructions before use.
• Do not touch hot surfaces. Use handles and knobs.
• To protect against electrical hazards, do not immerse the cord, plugs, or the appliance in water or other liquid.
• Close supervision is necessary when this appliance is used by or near children.
• The use of accessories or attachments not recommended by the manufacturer may cause hazards.
• Do not let the power cord hang over the edge of a table or counter, or touch hot surfaces.
• Do not place on or near a hot gas or electric burner, or in a heated oven.
• This appliance is for Household Use Only. Do not use the appliance for other than its intended use.
• If the power cable is damaged or the machine malfunctions, do not attempt to use it again and send it to a service center for repair.
• Always attach the plug to the appliance first, then the power cord to the wall outlet. To disconnect, turn any control to "OFF", then remove the plug from the wall outlet.
• Extreme caution must be used when moving an appliance containing hot oil or other hot liquids.

Polarized Plug Warning:

This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in any way.

Special Instructions:

A short power supply cord is provided to reduce the risk of becoming entangled in or tripping over a longer cord. Extension cords are available and may be used if care is exercised in their use. If an extension cord is used:

• The marked electrical rating of the extension cord must be at least as great as that of the product.
• Arrange the extension cord so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over unintentionally.

⚠️ CAUTION:

• Never put oil or butter in the inner popper.
• Never pop more than 100 grams (1 ladleful) of kernels at a time.

Note: The popper is designed to run for no longer than 5 minutes at a time. Allow the machine to cool for approximately 10 minutes in between uses.

Product Overview

This appliance is intended for use in household and similar applications such as:

• Staff kitchen areas in shops, offices, and other working environments.
• Hotels, motels, and other residential-type environments.

Never operate unattended or let children operate. Only reputable service agents should be used for repair.

Electrical Specifications

Certified by Intertek (ETL Listed).

Appliance Components

The Dragon Ball Z Popcorn Popper consists of the following main parts:

• Outer Cover: The main housing of the appliance.
• Popper Cover: A lid that fits inside the outer cover, covering the heating chamber.
• Measuring Ladle: Used for measuring kernels and potentially melting butter or warming oil.
• Chute: The exit point for popped corn.
• Inner Popper: The heating chamber where kernels are placed.
• Power Switch: The control to turn the appliance on and off.
• Power Cord: Connects the appliance to the electrical outlet.

Operation Instructions

Notes Before Use:

1. Check the package for complete parts.
2. Remove packing materials but keep the rating plate.
3. Confirm your local power mains supply is rated for AC 120V, 60Hz.

Operating Procedure:

1. Remove the measuring ladle and cover from the machine. Clean them with a damp cloth and allow to dry thoroughly.
2. Replace the cover, chute, and measuring ladle onto the machine. Slowly pour 1 ladleful of corn kernels into the inner popper.
3. DO NOT use more than 1 ladleful of kernels at a time.
4. The measuring ladle can be used to melt butter or warm oil while the machine is in use.
5. Place a bowl in front of the chute to catch the popped corn.
6. Plug in the machine, turn on the switch, and let it run for about 3 minutes. Some unpopped kernels may remain in the inner popper.

Maintenance and Cleaning

1. Unplug the appliance after use.
2. Once the machine has completely cooled down (approximately 10 minutes), you can clean it.
3. Remove the measuring ladle, chute, and cover. Be careful not to let oil or butter drip into the inner popper.
4. Clean the loose parts with warm, soapy water, then rinse with clean water. Use a cloth to wipe them dry.
5. Pour out any unpopped kernels and wipe the outside of the popper.
6. Never immerse the machine in water or any other liquid.
7. After all parts are cool and dry, store the popper.