MSI CLUTCH GM31 LIGHTWEIGHT WIRELESS Mouse
Model: GM31W
Overview
The MSI CLUTCH GM31 LIGHTWEIGHT WIRELESS mouse features the following components:
- 1. Left Button
- 2. Right Button
- 3. Scroll Wheel
- 4. Side Button 1 (Default Setting: Next Page)
- 5. Side Button 2 (Default Setting: Previous Page)
- 6. Diamond Pattern Anti-Slip Grip
- 7. Dragon RGB LED Light
- 8. Portable FriXionFree Cable
- 9. DPI Switch
- 10. Switch On/Off
- 11. Optical Sensor
- 12. Charging Port
- 13. PTFE Skates
- 14. Dongle (Used when CLUTCH GM31 LIGHTWEIGHT WIRELESS is active)
- 15. Pogo Pin (Used when CLUTCH GM31 LIGHTWEIGHT WIRELESS is recharging)
- 16. Dongle Port (Used when MSI Dongle is inserted)
- 17. USB Type-C Connector
- 18. Charger Anti-Slip Strip
LED Indicators Adjustment
Use the following button combinations repeatedly to select the desired mode:
- DPI Switch + Right Button = Adjust LED brightness levels
- DPI Switch + Scroll Wheel = Select LED Lighting Effect
- DPI Switch + Side Button 1 = Adjust Lighting Effect Speed
- DPI Switch + Side Button 2 = Select LED Color
For more information, please visit the MSI official website.
5-level DPI Presets
Higher DPI is recommended for monitors with higher resolution. Press the DPI switch located underneath the mouse repeatedly until the preferred selection is made.
| LED Color | DPI |
|---|---|
| Blue | 400 |
| Purple | 800 |
| Red | 1600 (default) |
| Yellow | 3200 |
| Green | 6400 |
Maximum DPI: 12000 (by software)
Battery Capacity Indicator
Read the color of the Dragon RGB LED indicator to learn the battery capacity of the mouse.
| Battery Capacity | LED Color |
|---|---|
| 90% - 100% | Steady Green |
| 70% - 90% | Breathing Green |
| 50% - 70% | Breathing Yellow |
| 30% - 50% | Breathing Orange |
| 10% - 30% | Breathing Red |
| 0% - 10% | Flashing Red |
Battery Percentage (%) can also be found in Dragon Center / MSI Center.
Specifications
- Rated Voltage / Current: 5V == 250mA
- Maximum Operating Temperature: 40 °C
Compliance Information
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. If interference occurs, users are encouraged to try to correct it by reorienting the antenna, increasing separation, connecting to a different outlet, or consulting a dealer/technician. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the device. Shielded interface cables must be used for compliance.
CE Marking
MSI declares that the radio equipment type GM31W is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: www.msi.com.
ISED Compliance Statement (Canada)
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation.
RF Exposure Statement
This equipment complies with FCC/IC RSS-102 radiation exposure limits for an uncontrolled environment. It should be installed and operated with a minimum distance of 20cm between the radiator and your body.
NCC (Taiwan)
Compliance statements for models GM31W, GM31WD, GM31WC are provided.
RoHS Compliance
This document indicates the presence or absence of restricted substances (Lead, Mercury, Cadmium, Hexavalent Chromium, Polybrominated biphenyls (PBB), Polybrominated diphenyl ethers (PBDE)) above the reference percentage levels, according to the SJ/T11363-2006 standard.
