Manual Code Window Handle Instruction

Illustration of a code window handle with labels pointing to: 'Fixed Button', 'Release Button', and 'Reset Lever' on the backside. The backside shows a mechanism with points labeled 'A' and 'B' for the reset lever.

Unlocking and Locking

The initial factory-set combination is 0-0-0. Please change this to your own combination before using the handle.

1. Rotate dials to the current combination and press down on the Release Button to unlock the handle.
2. Press down on Fixed Button and scramble the combination dials to lock the handle.

Setting

1. Rotate dials to the current combination.
2. Push the Reset Lever from A to B. The lever remains in this position.
3. Rotate dials to your desired combination.
4. Push the Reset Lever from B to A, back to the original position.
5. Scramble the combination dials to lock the handle.