User Manual for PHILIPS models including: WT065C LED Ledinaire Waterproof, WT065C, LED Ledinaire Waterproof, Ledinaire Waterproof, Waterproof

Waterpro of WT065C ALL IN A3正反两面 2023.05.05

Waterpro of WT065C ALL IN A3正反两面 2023.05.05

Notice de montage pdf 10.5 MB

WT065C LED41 68S/840 PSU L1500 | 911401815285 | Signify Company Website

Philips Ledinaire Etanche All-in WT065C, All-in, 53 W, 30 W | Signify Company Website FR BE

PDF preview unavailable. Download the PDF instead.

Ledinaire waterproof WT065C All in Manual Instruction
WT065C

WT065C LED29_48S/840 PSU L1200 WT065C LED41_68S/840 PSU L1500 WT065C LED29_48S/840 PSU L1200 TW1 WT065C LED41_68S/840 PSU L1500 TW1

System light output(Lm)

2900/4800

23/42

D

4100/6800

30/53

D

2900/4800

23/42

D

4100/6800

30/53

D

1207 1507 1214 1514

660-880 940-1160 660-880 940-1160

1.15 1.35 1.3 1.5

71 74

L
A L

Cable gland MUST be installed before installation, to safeguard IP protection.
LED29_48S 14.2 222
36 22 60 37

A
LED41_68S 15 240
31 19 52 32

-The luminaire shall be installed by a qualified electrician and wired in accordance with the latest IEE electrical regulations or the national requirements. The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
-Do not store/install/use the luminaire in corrosive environment with hazardous substances, e.g., sulphur, chlorine, phthalates etc.,or on the location where it is exposed to conductive dust, heavily grease (esp. mineral oil or distillates, e.g., petroleum), heavily naphthenic treated with hydrogen.
-This product is not suitable for cold & humid storage areas, especially where obvious temperature gradients are present, such as ventilation opening, door, etc.
-Do not install the luminaire on the location where it is exposed to direct sunlight. UV radiation will damage the material over time, resulting in loss of waterproof sealing and IP65 rating.
-Do not stare into LED light beam.

Dimensions L1200 L1500
L1200 TW1 L1500 TW1

2X Please use either of these two holes for installation
MultiLumen switch(2-in-1)- option Please switch off the mains before changing the lumens.
XX Lumen YY Lumen

Product Type LED29_48S LED41_68S

XX Lumen 2900 Lumen 4100 Lumen

YY Lumen (factory setting) 4800 Lumen 6800 Lumen

45 30 8

7 Min Installation Dis(mm)
cross section for inner wires is 2.5mm2

8

Type

Min installation distance(mm)

L1200

330

L1500

360

Ø20.5

(TW) Take the gland from the parts package

(Non TW) Drill the hole, take the gland from the parts package

foil needs to be removed Diagonal mounting

CZ


Corel PDF Engine Version 21.2.0.706 CorelDRAW 2019