Instruction Manual for enelion models including: Electric Car Charging Cable, Car Charging Cable, Charging Cable, Cable

INSTALLATION INSTRUCTIONS

24 lug 2023 — Mark the locations of the dowel holes by using the hook as a template. • Drill 4 holes 8 mm in diameter and. 60 mm deep. • Place the wall plugs in the holes ...

Download

Support Lumina - Enelion - EV charging manufacturer

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized



File Info : application/pdf, 1 Pages, 61.76KB

Document Document

INSTALLATION INSTRUCTIONS
FOR UNIVERSAL HOOK
FOR ELECTRIC CAR CHARGING CABLE

TOOLS REQUIRED TO MOUNT THE UNIVERSAL HOOK ON THE WALL:
· Drill with masonry drill bit 8 mm · Electric screwdriver with PZ2 bit
TOOLS REQUIRED TO MOUNT THE UNIVERSAL HOOK TO A METAL POLE:
· Electric screwdriver with PH2 bit
1 WALL MOUNTING METHOD:
· Mark the locations of the dowel holes by using the hook as a template.
· Drill 4 holes 8 mm in diameter and 60 mm deep.
· Place the wall plugs in the holes. · Place the bottom part of the plugs
on the screws. · Screw the hook to the post with the
screws. · Cover the heads of the screws with
the upper part of the plugs.

SET COMPONENTS:

x4

x4

x4

PH2

PZ2

· Universal hook - 1 pc. · Self-drilling screws PH2- 4 pcs. · Plastic expansion wall plugs with PZ2
screws - 4 pcs. · Screw plugs - 4 pcs.

2 METAL POLE MOUNTING METHOD:

· Mark the screw locations on the surface of the pole.
· Screw the hook to the post with the self-drilling screws.

1

2