Klipsch Reference Premiere User Manual

Reference

1) The standard, the benchmark, the point used for comparison

2) The embodiment of the legendary Klipsch sound

Loud and Proud Since 1946

In 1946, Paul W. Klipsch revolutionized the audio industry by creating proprietary horn technology and acoustic principles that drive the acclaimed signature sound. Today, Klipsch remains true to PWK's vision, delivering a century's worth of expertise into every product. These speakers are the result of an obsession with aural perfection. Experience the power, detail, and emotion of Klipsch Reference Series.

We are the Keepers of the Sound®.

Reference Premiere Speakers

Klipsch offers a comprehensive range of Reference Premiere speakers, including:

• RP-8060FA
• RP-8000F
• RP-6000F
• RP-5000F
• RP-4000F
• RP-600M
• RP-500M
• RP-400M
• RP-502S
• RP-402S
• RP-500SA
• RP-504C
• RP-404C
• RP-600C
• RP-500C
• RP-400C

Before You Start

Some Klipsch speakers require installation of feet or other accessories before use. Refer to Diagrams 1, 2, 3, and 4 for installation guidance.

Diagram 1: Monitor Wall Mount

Features rubber and felt bumpers. Mounting can be done via keyhole or threaded insert.

Diagram 2: Center Channels

Illustrates placement options for center channel speakers, either above or below the screen.

Diagram 3: Surround Speakers

Shows typical placement for surround speakers.

Diagram 4: Wall Mounting

Details wall mounting options, emphasizing the use of #10 2.5"-3" panhead wood screws into wall studs or anchors, leaving 1/4" exposed. A caution is noted against using the keyhole for ceiling mounting. Threaded inserts require 3/8-16 x 0.5" screws. Wall brackets are not included.

Room Placement

Left and Right Main Channel Speakers: For optimal performance, place speakers 6 to 15 feet (1.8 to 4.6m) apart. Slight toe-in can improve stereo imaging. The listening position should be approximately 1 to 1.5 times the distance between the speakers. Refer to Figures 1 and 3.

Center Channel Speakers: Position these speakers as close to the screen as possible, either directly on top of or below the screen, to ensure dialogue and primary sounds appear to originate from the video screen. Refer to Figures 1, 2, and 3.

Rear Surround Channel Speakers: Klipsch WDST surround speakers should be placed approximately 2 feet above the listening position, typically 5-7 feet above the floor. Placement on the walls adjacent to the listening position or behind the listening position is recommended. Final placement depends on room characteristics to recreate spatial ambience. Refer to Figures 1, 3, and 4.

Connection

Conventional Connection: Use 16-12 gauge speaker wire. Connect the RED (+) terminal of the LEFT speaker to the RED (+) terminal of the amplifier's LEFT channel. Connect the BLACK (-) terminal of the LEFT speaker to the BLACK (-) terminal of the amplifier's LEFT channel. Repeat for all speakers. Ensure no bare wires touch other terminals to prevent shorts.

Reference Premiere Models (RP-8060FA, RP-8000F, RP-6000F, RP-5000F, RP-4000F, RP-160M): These models feature dual binding posts. For single-wire connections, keep the terminal connecting bar in place. For Bi-wire or Bi-amp connections, remove the bar. Consult your receiver's manual for details.

Amplifier Requirements: Klipsch speakers are highly efficient and compatible with most amplifiers. They are 8-ohm compatible and deliver high output with low distortion. Use caution with the volume control to prevent hearing damage. Overdriving the amplifier may damage speakers. Ensure your amplifier is suitable for your application.

Reference Premiere with Dolby Atmos® Technology

Klipsch Reference Premiere speakers can be configured for Dolby Atmos® sound.

Speaker Models for Atmos:

• RP-8060FA
• RP-500SA

Dolby Atmos® Configuration:

• 1. Atmos Front: For front height effects.
• 2. Atmos Rear: For rear height effects.
• 3. Side Surround: For side surround effects.
• 4. Rear Surround: For rear surround effects.

Speaker Placement in Listening Area (Dolby Atmos): Diagrams illustrate optimal placement for front height (1), rear height (2), side surround (3), and rear surround (4) speakers in a typical listening environment, including recommended angles.

Connections (Dolby Atmos):

RP-8060FA (Elevation Speaker): Connect to the HEIGHT terminals of your receiver. Recommended minimum crossover: 80Hz.

RP-500SA (Floorstanding Speaker): Connect to the HEIGHT terminals of your receiver. Recommended minimum crossover: 150Hz.

Wall Mounting (RP-500SA): Similar to other speakers, wall mounting instructions apply, with a caution against using the keyhole for ceiling mounting.

Care and Cleaning

Dust speakers occasionally with a dry cloth. Avoid abrasive or solvent-based cleaners. Grilles can be cleaned with a vacuum cleaner's brush attachment.

Product Registration

Register your product online at www.klipsch.com/register to stay updated on new products and promotions. Personal information is not sold and not used for warranty purposes. Retain your receipt for warranty claims.

Important Safety Instructions

1. Read and keep these instructions.
2. Heed all warnings and follow all instructions.
3. Do not use the apparatus near water.
4. Clean only with a dry cloth.
5. Do not block ventilation openings; install according to manufacturer's instructions.
6. Do not install near heat sources.
7. Use only manufacturer-specified attachments/accessories.
8. Use only with specified carts, stands, tripods, brackets, or tables. Use caution when moving carts with apparatus to prevent tip-overs.
9. Do not expose the apparatus to dripping or splashing; do not place liquid-filled objects on it.
10. Switch off the amplifier before connecting speakers.

Symbols:

• Exclamation point in a triangle: Alerts to important operating and maintenance instructions.
• Lightning flash with arrowhead in a triangle: Alerts to the presence of uninsulated "dangerous voltage" posing an electrical shock risk.

Warnings:

• To reduce fire or electrical shock risk, do not expose to rain or moisture.
• No naked flame sources (e.g., candles) should be placed on the product.

Caution

Risk of Electric Shock: Do Not Open. Voltages are hazardous. No user-serviceable parts inside. Refer servicing to qualified personnel.

EU Compliance Information

Eligible for CE mark. Conforms to EU directives: Low Voltage 2006/95/EC, EMC 2004/108/EC, RoHS2 2011/65/EC, WEEE 2002/96/EC, REACH 2006/121/EC. Obtain a Declaration of Conformity from your dealer, distributor, or Klipsch Group, Inc. headquarters. Contact information available at: http://www.klipsch.com/Contact-Us

WEEE Notice

This mark applies to EU countries and Norway. The appliance is labeled according to Directive 2002/96/EC concerning waste electrical and electronic equipment (WEEE). Do not dispose of with household waste; deposit at an appropriate facility for recovery and recycling.

Warranty - U.S.

Klipsch Group, Inc. (KGI) warrants the original retail purchaser against defective materials and workmanship for two (2) years on electronics and five (5) years on woofer, cabinet, and non-electrical mechanics from the date of purchase, provided the product is used and maintained properly.

KGI will, at its option, repair or replace the product at no charge for parts or labor. If the model is unavailable, KGI may replace it with a current model of equal or greater value. Modifications to mounting surfaces may be required for new models; KGI is not liable for such modifications.

To obtain warranty service, return the product to your dealer. A copy of the original receipt is required. Return shipping for exchanges/repairs is the purchaser's responsibility.

Limitations:

• Does not cover failure due to improper installation, misuse, abuse, accident, neglect, mishandling, or normal wear and tear.
• Does not cover cosmetic damage or consequential damage to other components or premises.
• Void if used contrary to instructions, if serial numbers are altered/missing, or if purchased from an unauthorized dealer.
• Void if the product is sold or transferred to another party.

Legal rights vary by jurisdiction. KGI's liability is limited to repair or replacement. Implied warranties are limited to the warranty period. Some jurisdictions do not allow exclusion or limitation of implied warranties, so these limitations may not apply.

KGI is not liable for special, indirect, consequential, or incidental damages. Maximum liability is limited to the purchase price of the product. Some jurisdictions do not allow these limitations, so they may not apply.

Warranty Outside the U.S.

Warranty compliance follows applicable law when sold outside the U.S. For warranty service, contact the dealer or distributor from whom the product was purchased.

French - Garantie - États-Unis

Klipsch Group, Inc. (KGI) garantit à l'acheteur original que ce produit est exempt de tous vices de matériaux et de main d'œuvre pendant une période de deux (2) ans pour les composants électroniques et de cinq (5) ans pour le haut-parleur de graves, le coffret et les pièces mécaniques non électriques, à compter de la date d'achat, sous réserve d'une utilisation et d'un entretien corrects. Si ce produit s'avère défectueux en termes de pièces ou de main d'œuvre, KGI, à sa discrétion, (a) réparera le produit, ou (b) remplacera le produit sans facturer les pièces ni la main d'œuvre. Si ce modèle de produit n'est plus disponible et ne peut pas être efficacement réparé ni remplacé par un modèle identique, KGI pourra, à sa seule discrétion, remplacer l'appareil par un modèle plus récent de valeur identique ou supérieure. Dans certains cas, la substitution par un nouveau modèle pourra nécessiter la modification de la surface de montage. KGI décline toute responsabilité pour une telle modification. Pour obtenir une réparation ou un remplacement au titre de la présente garantie, veuillez d'abord prendre contact avec le revendeur, dans la mesure du possible, qui vous indiquera alors comment procéder pour une réparation ou un remplacement. Vous devrez fournir une copie de la facture d'origine.

L'expédition des produits retournés pour les échanges/réparations est strictement sous la responsabilité de l'acheteur original.

Limitations:

• Cette garantie limitée ne couvre pas la défaillance du produit résultant d'une mauvaise installation, d'un usage abusif ou incorrect, d'un accident, de négligence, d'une mauvaise manipulation, d'usure résultant de l'usage normal ou de détérioration due aux conditions ambiantes.
• Cette garantie limitée ne couvre pas les dommages esthétiques, notamment l'endommagement de la peinture, ni les dommages indirects à d'autres composants ou aux locaux résultant, quelle qu'en soit la raison, de la défaillance du produit.
• Cette garantie limitée est nulle et non avenue pour les produits n'ayant pas été utilisés conformément aux instructions de KGI.
• Cette garantie limitée est nulle et non avenue pour les produits dont le numéro de série est absent ou a été modifié, ainsi que pour les produits non achetés auprès d'un détaillant agréé.
• Cette garantie limitée prend fin en cas de vente ou de cession du produit à un tiers.

CETTE GARANTIE DONNE À L'ACHETEUR DES DROITS SPÉCIFIQUES. CELUI-CI PEUT ÉGALEMENT BÉNÉFICIER D'AUTRES DROITS QUI VARIENT SELON LES ÉTATS OU PROVINCES, LES JURIDICTIONS ET LES PAYS. LA RESPONSABILITÉ DE KGI EN CAS DE MAUVAIS FONCTIONNEMENT OU DE DÉFAILLANCE DU MATÉRIEL EST LIMITÉE AU REMPLACEMENT OU À LA RÉPARATION DE CELUI-CI DANS LES CONDITIONS ÉTABLIES PAR CETTE DÉCLARATION DE GARANTIE. TOUTES LES GARANTIES EXPRESSES ET IMPLICITES RELATIVES AU PRODUIT, Y COMPRIS, MAIS NON EXCLUSIVEMENT, TOUTE GARANTIE IMPLICITE DE VALEUR MARCHANDE OU D'ADÉQUATION À UN USAGE PARTICULIER, SONT LIMITÉES À LA PÉRIODE DE CETTE GARANTIE. CERTAINS ÉTATS, PROVINCES, JURIDICTIONS OU PAYS NE PERMETTENT PAS L'EXCLUSION DE CERTAINES CONDITIONS OU GARANTIES IMPLICITES, OU LA LIMITATION DE DURÉE DES CONDITIONS OU GARANTIES IMPLICITES, LES LIMITATIONS CI-DESSUS PEUVENT NE PAS ÊTRE APPLICABLES. KGI DÉCLINE TOUTE RESPONSABILITÉ POUR LES DOMMAGES PARTICULIERS, INDIRECTS, CONSÉCUTIFS OU ACCESSOIRES, Y COMPRIS MAIS SANS S'Y LIMITER, TOUTE RESPONSABILITÉ POUR LES PLAINTES CONTRE VOUS PAR DES TIERS POUR DOMMAGES OU NON-DISPONIBILITÉ DES PRODUITS POUR L'UTILISATEUR. LA RESPONSABILITÉ MAXIMALE DE KGI NE DÉPASSERA PAS LE MONTANT PAYÉ POUR LE PRODUIT OBJET DE LA PLAINTE. CERTAINS ÉTATS, PROVINCES, JURIDICTIONS OU PAYS NE PERMETTANT PAS L'EXCLUSION OU LA LIMITATION DES DOMMAGES PARTICULIERS, INDIRECTS, ACCESSOIRES OU CONSÉCUTIFS, LES LIMITATIONS CI-DESSUS PEUVENT NE PAS ÊTRE APPLICABLES.

Garantie en dehors des États-Unis

Si ce produit est vendu dans un pays autre que les États-Unis, la garantie doit être conforme aux lois en vigueur. Pour bénéficier de toute intervention sous garantie applicable, contactez le revendeur auprès duquel le produit a été acheté ou le distributeur l'ayant fourni.

Klipsch RP-600M Specifications

Frequency Response: 45-25kHz +/- 3dB

Sensitivity: 96dB @ 2.83V/1m

Power Handling (CONT/PEAK): 100W/400W

Nominal Impedance: 8 Ohms Compatible

Crossover Frequency: 1500Hz

High Frequency Driver: 1" Titanium LTS Vented Tweeter with Hybrid Cross-Section Tractrix® Horn

Low Frequency Driver: 6.5" Cerametallic Cone Woofer

Enclosure Material: MDF

Enclosure Type: Bass Reflex via rear-firing Tractrix® Port

Inputs: Dual binding posts/bi-wire/bi-amp

Height: 15.69" (39.9 cm)

Width: 7.95" (20.2 cm)

Depth: 11.85" (30.1 cm)

Weight: 16 lb (7.3 kg)

Finish: Ebony, Walnut, Piano Black

Accessories: Rubber Feet (8)

Built From: 2018

90° x 90° Silicon Composite Hybrid Tractrix® Horn: Maximizes efficiency and increases detail by focusing high frequencies towards the listening area. Proprietary Tractrix geometry ensures efficient transfer of high-frequency waves. The phase plug and compressed molded silicon face provide a smooth frequency response for clean, natural sound.

Linear Travel Suspension (LTS) Titanium Diaphragm Tweeter: Minimizes distortion for enhanced, detailed performance. A hallmark of previous Reference lines.

Vented Tweeter Design: Reduces standing waves that create unwanted harmonics, enhancing detail and clarity in high-frequency reproduction.

Spun Copper Cerametallic Woofers: Exceptionally rigid and lightweight for minimal distortion and maximum efficiency. Paired with the Tractrix horn-loaded LTS tweeter for the highest speaker efficiency in its class.

Tractrix Ports: Utilize Tractrix geometry for efficient, fast air transfer from the cabinet, reducing port noise for punchier low frequencies. Custom inner flares minimize air turbulence for cleaner, more powerful bass.

Robust Input Terminals: Single 5-way screw terminals accept banana plugs or bare wire up to 12-gauge for flexible, lasting connections. Vibrant color coding aids easy setup.

Furniture Grade Materials and Finishes: Available in ebony vinyl, walnut vinyl, and piano gloss. Ebony and walnut models feature satin painted baffles with a scratch-resistant finish. The premium piano gloss cabinet is hand-sanded for a clear, mirror-like finish.

Strong, Flexible, Removable Grille: Attaches magnetically for an elegant transition between showstopper and discrete appearance.

Dramatic Details: Copper anodized trim rings, cast aluminum feet, satin painted baffles, and a laser-etched logo treatment provide a modern, premium look.