ℹ️ Document Conversion Notice:
This document has been converted from PDF and formatted to fit this screen. Diagrams and images may be available only in the original here.
M110 Label Maker Product Instruction Manual
Please read this instruction book carefully before operating the product.
01. Packing List
Illustration of the M110 Label Maker, product instruction booklet, charging cable, and removable gear adjustment board.
Label Maker ×1
Product instruction ×1
Charging line ×1
Removable gear adjustment board ×1 (installed in the printer)
⚠ NOTE: The number of paper rolls in the list is subject to the actual shipment.
02. Product Specifications
Name
Label Maker
Model
M110
Print technology
Thermal printing
Effective printing width
20-50mm
Supported consumables
Pre-cut paper, black mark paper, continuous paper
Consumable specifications
57mm × 50mm (Max width × Max diameter)
Print speed
20-45mm/s (switchable, level 1-5)
Printing density
Switchable, level 1-15
Print resolution
203dpi
Print head service life
50KM
Communication interface
Bluetooth, Micro USB
Product size
113.15×86.5×62.33mm (4.45×3.4×2.45inch)
Power input
5V ⎓ 2A
Power supply method
Micro USB, Lithium battery
Supported operating system
Android, iOS
Instruction set
ESC/POS
Bar code
1D bar code & 2D bar code
Working environment
5°C~50°C
Storage environment
-20°C~60°C
Working humidity
20%~85%
Storage humidity
2%~95% (Non condensation)
03. Product Appearance Introduction
Diagram of the M110 Label Maker highlighting key components: Paper exit, Screen, Power button, Feed button, Rope hole, USB port, and Reset hole.
Button function introduction
Diagram
Button
Operating
Features
⏻
Power Button
Long press 3s
Power on/off
Continuous click
Switchable home menu
🖶
Feed Button
Click on (Consumables are Pre-cut paper and black mark paper)
Take a label, position and adjust it to the beginning of the next label
Click on (Consumable is continuous paper)
Press the paper feed button to feed the paper, release the paper feed key and stop the paper feed.
Long press 3s
Automatically return to the main menu interface.
Continuous click
The power button switches the homepage menu, and can be used to switch sub-menus.
No paper in the bin or paper is installed incorrectly
Paper cover is opened
The paper cover is opened
05. Printer Paper Roll Installation
Long press the power button for 3s.
Hold both sides of the printer paper compartment cover (both sides of paper outlet) with your hand, and open the paper compartment cover forcefully with finger cushion upwards.
Illustrations showing the power button press and opening the paper compartment cover.
Take out the label paper mounting bracket in the paper compartment.
Illustration of removing the label paper mounting bracket.
Remove the left baffle, put in the label paper roll (label printing side down), and push the left baffle to the right.
Three illustrations showing the process: removing the left baffle, inserting the paper roll with the print side down, and pushing the baffle back.
Align the installed label roll holder with the card slots on both sides, and put it into the paper compartment.
Illustrations showing aligning the label roll holder and placing it into the compartment.
Pull out part of the paper (approximately 15mm above the paper exit), and close the paper compartment cover.
Illustration showing pulling out 15mm of paper and closing the cover.
The printer feeds paper automatically to position the gap of label paper, and then the paper roll installation is complete.
Illustration showing the printer automatically feeding the paper.
⚠ NOTE: After the first operation or each time consumables are replaced, the printer will automatically feed the paper so that it can position the label to avoid incomplete printing, missing, or non-aligned labels.
06. App Download Method
Illustration of a smartphone screen displaying the "Print Master" app icon.
⚠ NOTE:
This product needs to be connected to the printer in the App.
Due to the requirements of mobile phone systems, Android mobile phones will use the user's geographic location when connecting, so the user needs to turn on GPS and confirm the authorization.
Method I: Scan QR Code
Please use your mobile phone to scan the QR code to download the App.
A QR code for downloading the app.
Method II: Search App Store
Search "Print Master" to download the App.
Icons representing Google Play, App Store, and a search bar for "Print Master".
Illustration of a smartphone screen showing "Location Services" set to "On".
Open the App.
Illustration of a smartphone screen showing the "Print Master" app icon.
Click to search for the device.
Illustration of a smartphone screen with a "Connect now" button.
Connect immediately.
Illustration of a smartphone screen with a "Start Using" button.
⚠ NOTE:
When connecting the device in the App, please make sure that your Label Maker is turned on and Bluetooth of your mobile phone is turned on.
Due to the requirements of mobile phone systems, Android mobile phones will use the user's geographic location when connecting, so the user needs to turn on GPS and confirm the authorization.
08. Confirm the Label Size
Method I: Check the label paper packaging.
Please refer to the actual size used.
Illustration of a label paper package with details: Product: Pattern label, Model: DP - P06, Detail: Polar bear, Seal, Snow fox, Spec: 12*40mm / 210 pcs, Quantity: 3.
Method II: Use a ruler to measure.
Use a ruler to measure the label dimensions.
Illustration of a label roll with a single label pulled out, showing dimensions of 30mm width and 40mm height, with a ruler below for measurement.
09. Printing Guide—New Label
After clicking "New", customize the label size and paper type.
Illustration of the Print Master app screen with a large "+" button labeled "New".
Customize the label size.
Illustration of the app screen showing label customization options: Die-cut, Black, Conti. Label name: Creat label, Label width: 40 mm, Label height: 30 mm, Print direction: 0°, 90°, 180°, 270°.
Click "(T)" to input text.
Illustration of the app screen with a "T" icon for text input and a virtual keyboard.
After editing, click to "Print".
Illustration of the app screen with a large "Print" button.
09. Printing Guide—Select the "Label Paper" Template
Click "Label Paper".
Illustration of the Print Master app screen with a "Label Paper" button.
Select the label paper template.
Illustration of the app screen showing template options, including "Round label".
Click "(T)" to input text.
Illustration of the app screen with a "T" icon for text input and a virtual keyboard.
After editing, click to "Print".
Illustration of the app screen with a large "Print" button.
⚠ NOTE: If the matching template is not selected, undesirable situations such as half-printed labels may occur.
09. Printing Guide—Edit function description
Shortcut keys
Illustration of app shortcut keys: Delete, Enlarge, Shrink, Undo, Redo, and Print.
Editing function
Two illustrations of app editing functions. The first shows icons for Text, Icon, Border, Picture, Time. The second shows icons for 1D code, QR Code, Line, Shape, Excel.
⚠ NOTE: App functions will be updated with new functions irregularly; please refer to the actual function.
Functions
Description
T (Text icon)
Click to insert text. Users can edit the text size, typesetting, and select various fonts, etc.
☆ (Icon function)
Icon function, click to insert all kinds of cute icons.
◻ (Border Function)
Click Border Function, and choose various cute borders to decorate your label.
🖼 (Picture icon)
Click to insert the picture you want to edit and print.
🕑 (Time icon)
Insert date and specific time.
↻ (Scan code icon)
Click to scan the code to identify. It can quickly identify the text content in the QR Code.
▌▌▌ (One-dimensional code icon)
Click to insert a one-dimensional code. Enter the information to be edited, then a one-dimensional code can be automatically generated, and the layout can be adjusted.
▦▦▦ (QR code icon)
Click to insert a QR code. Enter the information to be edited, then a QR code can be automatically generated, and the layout can be adjusted.
『~』 (Line icon)
Insert a line. Users can choose a dashed line or a solid line.
☀ (Shape icon)
Click to insert round or square shapes.
🗐 (Table import icon)
Support table import, therefore quickly generating a list that needs to be printed.
🔍 (Recognize text icon)
Click to recognize text in the picture.
🖵 (Template icon)
One-click editing/printing of more scene label templates.
10. How to Deal with Common Problems
Serial number
Common problem
Treatment
1
With paper fed into the bin, still no paper is detected on the screen. What's the matter?
Referring to the instructions, check whether the paper is in place on the right side of the Label Maker. Pull out the paper a bit from the outlet, allowing it in between the upper and lower paper sensors, and close the bin cover.
2
Long-press the power key, what if no response?
The Label Maker may be in power failure. Restart it after charging for half an hour.
3
What if automatic shutdown of a Label Maker?
(1) Check whether the App has set the automatic shutdown time; (2) If the power is too low, it will automatically shut down in need of a timely charge.
4
What if the Label Maker refuses to charge?
(1) Please charge for at least half an hour; (2) Manual reset. There is a reset plughole (reset hole) beside the printer charging port. Just press for 1-2 seconds with a pin and let go; (3) Please check whether the charger uses 5V-1A or 5V-2A for charging; (4) Replace the charger or move to another outlet; (5) In case the above method still fails, please contact the local dealer for replacement.
5
What if the Label Maker refuses to charge?
(1) Press the power key to cancel; (2) Manual reset. There is a reset plughole (reset hole) beside the printer charging port. Just press for 1-2 seconds with a pin and let go.
6
What if the paper is blank after printing?
(1) The paper roll is installed reversely. Arrange the printing paper in the other direction, making sure that the correct printing side is facing down, and keep it to the right side. (2) If paper is blank during the printing gap, please check whether the Label Maker display menu has correctly selected "label paper".
7
Fuzzy printed content
(1) Check whether the label roll is in the storage period or whether there are foreign matters, clean or replace another; (2) According to the instructions, wipe the printing area with an alcohol swab to ensure that there is no dirt on the print head.
8
Indirect skip or incomplete printing content occurs
(1) Cleanse the printer thermistor and paper outlet according to the instructions; (2) Reinstall the paper roll bracket once, and manually press the paper feeding key once to allow the printer to recognize the paper gap position. (3) Check whether the paper size and software print template match.
9
How to solve the problem that the printer does not run smoothly or feeding failure in the process of paper feeding or printing?
(1) The paper roll bracket is too tight or stuck. Generally, it is about 1mm of the appropriate gap between the roll and the baffles on both sides, which can ensure smooth feeding without paper jam. (2) According to the instructions, wipe the printing area and paper outlet area of the Label Maker with an alcohol swab, touch the printing area with your hand to check no stickiness, and then try to print.
10
What if multiple mobile phones are simultaneously connected, but can't be functioning?
(1) A printer can function only connected to one mobile phone, rather than multiple ones at the same time. (2) When connected to another phone, please first disconnect the connected one.
11. Warranty Description
Thank you for choosing the label printer products produced by the company.
The company provides customers with reliable "replacement/return" support during the one-year warranty period from the date of purchase.
Customers should keep the warranty card in a safe place so that it can be read when needed.
If there are any problems or needs regarding the product or this user manual, customers are encouraged to contact customer services. The company will do its best to help.
NOTE: If the supporting software is updated, it will be compiled into the new version of the manual without notice.
12. FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reliable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
*RF warning for Portable device:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
13. Warranty/Maintenance Card
A form with checkboxes for "Replace" and "Return". Fields for User Information (Name, Phone, Address), Product Information (Date of purchase, Product order number, Product serial number), and Reason for Return (Replace / Repair / Request Maintenance) with a Fault description field.
C1JXwD-8oUL Adobe PDF library 15.00 Adobe Illustrator 24.3 (Windows)
Related Documents
M110 Portable Label Printer Instruction Manual The M110 Portable Label Printer instruction manual provides comprehensive details on product specifications, setup, operation, and troubleshooting. Learn how to install paper rolls, connect to the 'Print Master' app via Bluetooth, and understand button functions. This guide covers technical specifications, display settings, and regulatory compliance (FCC, IC) for efficient and reliable label printing.
M110 Portable Label Printer Instruction Manual Comprehensive instruction manual for the M110 portable label printer, covering product specifications, setup, app download, printer connection, label size confirmation, printing guides, troubleshooting, and warranty information. Learn how to operate and maintain your M110 thermal label printer.
M110 Portable Thermal Label Printer Instruction Manual Comprehensive instruction manual for the M110 portable thermal label printer, covering product specifications, setup, app download, connection, and troubleshooting. Learn how to install paper rolls, configure settings, and maintain your M110 label printer for efficient use.
