Product Liability Disclaimer-MEAN WELL Switching Power Supply ManufacturerGlobal Trade Item Number (GTIN)-MEAN WELL Switching Power Supply Manufacturer
Owner's Manual for MEAN WELL models including: UHP-500-4.2, UHP-500-5, UHP-500-12, UHP-500-15, UHP-500-24, UHP-500-36, UHP-500-48, UHP-500-55, UHP-500 Series 500W Slim Type with PFC Switching Supply, 500W Slim Type with PFC Switching Supply, Type with PFC Switching Supply, PFC Switching Supply, Switching Supply
UHP-500-24 MEAN WELL - РКС Компоненти - РАДІОМАГ
File Info : application/pdf, 6 Pages, 759.54KB
DocumentDocument500W Slim Type with PFC Switching Supply
UHP-500 series
User's Manual
Video
GB 4943.1
UL62368-1
Bauar t gepruft Sicherheit
egelma ge od o s be wac g
www. tuv.com ID 2000000000
BS EN/EN62368-1 BS EN/EN61558-1 BS EN/EN61558-2-16
IEC62368-1 IEC61558-1 IEC61558-2-16
Note 10
-~+
Industrial automation machinery Industrial control system Mechanical and electrical equipment Electronic instruments, equipments
or apparatus
LED display application Power Source Equipment for PoE(55V model)
R
File Name:UHP-500-SPEC 2024-12-30
Downloaded from Arrow.com.
500W Slim Type with PFC Switching Supply
UHP-500 series
SPECIFICATION
MODEL
UHP-500 -4.2 UHP-500 -5 UHP-500 -12 UHP-500 -15 UHP-500 -24 UHP-500 -36 UHP-500 -48 UHP-500 -55
DC VOLTAGE
4.2V
5V
12V
15V
24V
36V
48V
55V
RATED CURRENT
80A
80A
41.7A
33.4A
20.9A
13.9A
10.45A
8.9A
RATED POWER
336W
RIPPLE & NOISE (max.) Note.2 200mVp-p
400W 200mVp-p
500.4W 501W
501.6W
200mVp-p 200mVp-p 240mVp-p
500.4W
501.6W
500W
360mVp-p 360mVp-p 500mVp-p
OUTPUT
VOLTAGE ADJ. RANGE Note.7 3.6~4.4V 4.5~5.5V 11.4~12.6V 14.3~15.8V 22.8~25.2V 34.2~37.8V 45.6~50.4V
VOLTAGE TOLERANCE Note.3 ±2.0%
±2.0%
±1.0%
±1.0%
±1.0%
±1.0%
±1.0%
LINE REGULATION
±0.5%
±0.5%
±0.3%
±0.3%
±0.3%
±0.3%
±0.3%
LOAD REGULATION
±1.0%
±1.0%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
SETUP, RISE TIME
1000ms, 50ms/230VAC; 1000ms,50ms/115VAC at full load;550ms/230VAC for 55V setup time
45~58V ±1.0% ±0.3% ±0.5%
HOLD UP TIME (Typ.) 12ms/230VAC 12ms/115VAC
VOLTAGE RANGE Note.4 90 ~ 264VAC 127 ~ 370VDC
FREQUENCY RANGE 47 ~ 63Hz
POWER FACTOR (Typ.) PF0.95/230VAC PF0.98/115VAC at full load
INPUT EFFICIENCY (Typ.)
89%
90%
94%
94%
94.5%
95%
95%
95%
AC CURRENT (Typ.)
4.85A/115VAC 2.6A/230VAC
INRUSH CURRENT (Typ.)Note9 Cold start 30A/115VAC LEAKAGE CURRENT <0.75mA / 240VAC
60A/230VAC
OVERLOAD
110~140% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed
PROTECTION OVER VOLTAGE
4.62 ~ 5.46V 5.75 ~ 6.75V 13.2 ~ 15.6V 16.5 ~ 19.5V 26.4 ~ 31.2V 39.6 ~46.8V 52.8 ~ 62.4V 60 ~ 69V Protection type :Shut down O/P voltage,re-power on to recover
FUNCTION
OVER TEMPERATURE DC OK SIGNAL(Optional)
REDUNDANT(Optional)
Protection type :Shut down O/P voltage, recovers automatically after temperature goes down Contact rating(max.):30Vdc/1A resistive load
For parallel connection protection:For parallel applications, when one PSU can not work , the another one will be automatically enabled. This can prevent the system crash, and provide the reliability of system
WORKING TEMP.
-30 ~ +70(Refer to "Derating Curve")
WORKING HUMIDITY 20 ~ 95% RH non-condensing
ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85, 10 ~ 95% RH non-condensing
TEMP. COEFFICIENT
±0.03%/ (0 ~ 50)
VIBRATION
10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY STANDARDS SAFETY &
UL 62368-1,TUV BS EN/EN62368-1,BS EN/EN60335-1(Except for 55V), BS EN/EN61558-1,BS EN/EN61558-2-16, GB 4943.1, BSMI CNS15598-1, EAC TP TC 004 approved;Design refer to AS/NZS 61558.1/2.16, AS/NZS 62368.1
EMC
WITHSTAND VOLTAGE I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.25KVAC
(Note.6) ISOLATION RESISTANCE I/P-O/P, I/P-FG,O/P-FG:100M Ohms/500VDC/25/ 70%RH
EMC EMISSION EMC IMMUNITY
Compliance to BS EN/EN55032,GB17625.1,GB/T 9254.1,Class B, BS EN/EN61000-3-2,-3, BSMI CNS15936, EAC TP TC 020
Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11;BS EN/EN61000-6-2 (BS EN/EN50082-2),BS EN/EN55035,
heavy industry level ,EAC TP TC 020
MTBF
1264.1 K hrs min. Telcordia SR-332 (Bellcore) ; 167.6K hrs min. MIL-HDBK-217F (25)
OTHERS DIMENSION
232*81*31mm (L*W*H)
PACKING
0.905kg; 16pcs/15.48kg/0.82CUFT
NOTE
The The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed
that it still meets EMC directives. (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf)
Product Liability DisclaimerFor detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx
Downloaded from Arrow.com.
File Name:UHP-500-SPEC 2024-12-30
500W Slim Type with PFC Switching Supply
Block Diagram
EMI FILTER
I/P
&
RECTIFIER
FG
PFC CIRCUIT
POWER SWITCH-
ING
O.T.P.
O.L.P.
CONTROL
UHP-500 series
RECTIFIERS &
FILTER
DETECTION CIRCUIT
O.V.P.
PFC fosc:60KHz PWM fosc:65KHz~75KHz
+V -V
Derating Curve
DC OK Function Redundant Function
12V,15V
100
others
80
4.2V,5V
60 40
20
-30
0
10
20
30
40 45 50
60
70 (HORIZONTAL)
AMBIENT TEMPERATURE ()
RATED CURRENT (%)
230Vac for 12V,15V
100
230Vac for other
90
230Vac for 4.2V,5V
80
110Vac for other
70
230Vac for 55V
60
110Vac for 4.2V,5V
50
40
30
20
110Vac for 55V
-30
0
10
20
30
40 45 50
60
70 (HORIZONTAL)
AMBIENT TEMPERATURE WITHOUT ALUMINUM PLATE()
RATED CURRENT (%)
RATED CURRENT (%)
100 80 60 40 20
-30
0
10
20
30
40
50
60
70
80
90 (HORIZONTAL)
Tcase ()
Downloaded from Arrow.com.
File Name:UHP-500-SPEC 2024-12-30
LOAD (%)
500W Slim Type with PFC Switching Supply
STATIC CHARACTERISTIC
100 90 80 70 60 50 40
90 100 110 120 140 160 180 200 220 240 264
INPUT VOLTAGE (V) 60Hz
DC OK Relay Contact
Contact Close Contact Open Contact Rating(max.)
PSU turns on/DC ok PSU turns off/DC fail 30Vdc/1A resistive load
UHP-500 series
Redundant function
(1) UHP-500R is built-in redundant function and can be connected 2 units in parallel . (2) When in parallel operation the maximum load should not be greater than the rated power of any PSU.
+V
PSU -V
+V -V
LOAD
+V
PSU -V
Downloaded from Arrow.com.
File Name:UHP-500-SPEC 2024-12-30
500W Slim Type with PFC Switching Supply
UHP-500 series
Mechanical Specification
CASE NO.:233D
Unit:mm Tolerance:±1
9
81
63
7.62 15.5
TB1
3 2 1
232
226
3
tc
tc : Max. Case Temperature
1
TB3
9.0
2
3
TB2
4
CN1
21
SVR
4-4.2
116
31
AC Input Terminal(TB1) pin NO. Assignment
Pin No. Assignment Terminal
Max mounting torque
1
AC/L
2
AC/N
(DEGSON) DG28C-B-03P
5Kgf-cm
3
DC OK Connector(CN1):JST B2B-PH-K-S or requivalent
Pin No. Assignment Mating Housing
Terminal
1
DC COM1
JSTPHR-2
JSTSPH-002T-P0.5S
2
DC COM2 or requivalent
or requivalent
DC Output Terminal(TB2,TB3) pin NO. Assignment
Pin No. Assignment
Terminal
Max mounting torque
1,2
-V
(MW)
3,4
+V
MEL-400-02P
8Kgf-cm
Downloaded from Arrow.com.
File Name:UHP-500-SPEC 2024-12-30
500W Slim Type with PFC Switching Supply
UHP-500 series
Installation
1.Operate with additional aluminum plate In order to meet the"Derating Curve"and the "Static Characteristics" ,UHP-500 series must be installed onto an aluminum plate(or the cabinet of the same size)
on the bottom.The size of the suggested aluminum plate is shown as below. And for optimizing thermal performance, the aluminum plate must have an even and smooth surface (or coated with thermal grease), and UHP-500 series must be firmly mounted at the center of the aluminum plate.
unit:mm
450
M3*4
3
450
Downloaded from Arrow.com.
File Name:UHP-500-SPEC 2024-12-30