MILESEEY PFS2 Laser Rangefinder

Product Overview

A visual representation of the MILESEEY PFS2 Laser Rangefinder shows its top and side views with numbered components.

• 1. Mode Button ?: Short-press to switch modes; Long-press to switch between red and black display; long-press again to adjust display brightness.
• 2. Power/Measure Button [Power/Measure]: Short-press to power on/off; After power-on, short-press to range, or long-press to scan (continuous measurement).
• 3. Diopter Dial: Rotate to adjust eyepiece focus.
• 4. Slope Switch [Slope Switch]: Rotate clockwise/counterclockwise to toggle the slope function on/off.
• 5. Battery Compartment [Battery Compartment]: Rotate clockwise to open, or counterclockwise to tighten.

Display Instructions

An illustration depicts the laser rangefinder's display screen, showing various icons and numerical readouts.

• 1. Battery Level ?: (only appears when battery is low)
• 2. Line of Sight Distance & Unit: Displays measured distance and unit (e.g., Y for yards, M for meters).
• 3. Flag-Lock Mode ?: Indicates when the device is locked onto a flag.
• 4. Scan Mode ▶️: (flashes during scanning) Indicates continuous measurement mode.
• 5. Mentor Mode ⛳: Indicates Mentor Mode is active.
• 6. Slope Function ?: Indicates the slope function is active.
• 7. Aiming Circle ?: The reticle used for aiming at the target.
• 8. Slope-Adjusted Distance & Unit: Displays distance adjusted for slope and unit.

Using Mentor Mode

To use Mentor Mode ⛳, short-press the Mode button ?. This mode allows measurement from the device to the ball (P) and then from the device to the pin (P1). The PFS2 automatically calculates and displays the yardage from the ball to the pin (P-P1).

A golf course scene illustrates Mentor Mode. It shows a golfer, a golf cart, a flag on a green, and a golf ball. Red circles highlight the display readouts for measuring the distance to the ball (P) and the pin (P1), and the calculated slope-adjusted distance (P-P1).

Company Information and Compliance

Mileseey Technology (US) Inc.

Office Address: 17800 CASTLETON ST STE 665 CITY OF INDUSTRY, CA 91748

Manufacturer: Shenzhen Mileseey Technology Co., Ltd.

Address: No.3601 Block A, Tanglang Town Plaza West, Fuguang Community, Taoyuan Street, Nanshan District, Shenzhen, China

Online Store: www.mileseeygolf.com

Email: mileseeytools@mileseey.com

Country of Manufacture: MADE IN CHINA

Certifications: The product bears FC, CE, and ROHS certifications.

Recycling Information: Users are responsible for returning used electrical and electronic equipment to designated collection points. This device and its batteries are recyclable. Further information can be found at www.quefairedemesdechets.fr.