Smart Lock Box User Manual (Bluetooth & Fingerprint)

Product Overview

This document is the user manual for the Smart Lock Box, a device offering secure access via Bluetooth and fingerprint recognition. It provides detailed instructions for setup, operation, and installation.

Image: A compact, black electronic lock box with a fingerprint sensor on the front.

Product Specifications and Accessories

Product Parameters:

• Material: Aluminium Alloy/ ABS
• Overall Size: 145*105*55mm
• Working Voltage: 4.5-6 V
• Working Temperature: -20℃~60℃
• Power Interface: Type-C
• Internal Size: 112*80*28mm
• Battery Life: 12+ months
• Waterproof Rating: IP65

Accessories:

• Key Box: 1 Piece
• Drill Template: 1 Piece
• Bolts: 4 Pieces
• User Manual: 1 Piece
• Type-C Cable: 1 Piece
• Screws: 4 Pieces

Factory Setup

The lock box can be unlocked by any fingerprint until desired fingerprints are registered.

Battery Installation

The lock requires 4 AAA Alkaline batteries (not included). Alternatively, use the Type-C cable to connect to the charging port. Press the sensor to open the front lid to install batteries before starting.

Download Smart Life APP

Search for and download the "Smart Life" app from your app store and register an account.

Connecting the Lock with Smart Life APP

Method #1:

1. Turn on Bluetooth and network on your cellphone.
2. Open the "Smart Life" app.
3. Touch the fingerprint sensor to activate the device.
4. Tap "Add Devices". Your cellphone will automatically search for and match the device.
5. The app will recognize the lock and display a "Discovering devices" notice. Tap "Add" on the right side.

Method #2:

1. On the "Add devices" page, tap the "+" icon.
2. The app will automatically match the device and show "Added Successfully".
3. Tap "Done" at the bottom to add the device.

Description of app interface elements: A screen showing "Discovering devices..." with an "Add" button. Another screen shows "1 device(s) added successfully" with the device name "smart_key_box_fp".

Using the App to Unlock

Warm Notice: A finger touch is required to activate the sensor before Bluetooth connection. There is a 30-second window for setup; otherwise, the device enters sleep mode and requires reactivation by touch.

1. On the app's home page, find the device (Smart Key Box FP).
2. Tap the icon to access the device control page.
3. Slide the key icon to the right to unlock the lock.

Description of app interface elements: A device control page showing battery status (98%) and a lock icon. Sliding the key icon to the right enables unlocking.

Using the App to Set Up Fingerprint

1. Enter the "Member Management" page.
2. Select the user under "Family Member" and tap the fingerprint icon.
3. Tap the "+ Add" option, then follow the app's instructions to set up the fingerprint.

Warm Notice: Place your finger on the sensor 6 times at different angles. A maximum of 10 fingerprints can be registered.

Description of app interface elements: A "Member Management" screen showing existing members and an "Add" button for fingerprints. A prompt to place a finger on the recognition area.

Using the App to Remove Device or Delete Fingerprint

1. Tap "Remove device".
2. Select "Disconnect" to remove the connection between the device and cellphone. Fingerprints remain.
3. Select "Disconnect and wipe data" to disconnect the cellphone and delete all fingerprints.

Installation

1. Mark 4 positioning points on the wall or door using the drilling template.
2. Use an electric drill to punch holes at the marked positions (Ø6 x30 mm).
3. Insert the plastic bolts.
4. Open the front lid and secure it with the screws provided in the installation bag.

Indicators

The device uses three colors to indicate different statuses. Refer to the chart below:

Compliance Information

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Certifications: FCC, CE, RoHS Certificates