Phonocar SM319 Mediastation for Fiat Panda

Product Overview

The Phonocar SM319 is a Customfit Mediastation designed as a replacement for the original equipment (OEM) system in Fiat Panda vehicles. It features a high-definition 7-inch capacitive touchscreen QLED monitor and runs on the Android 13 operating system.

It offers extensive connectivity, including wireless Apple CarPlay and Android Auto, advanced DAB+ radio, OEM rear-view camera input, and steering wheel control integration. The system supports both online (Google Maps) and offline (iGO) navigation.

⚠️ Warnings

Please read this instruction manual carefully before proceeding with installation.

• Phonocar S.p.A. is not responsible for damages resulting from improper installation or misuse of the product.
• Installation must be performed by qualified personnel only.
• Installation should occur in a properly equipped workshop with the vehicle stationary, engine off, and parking brake engaged.
• Refer to the vehicle's specific safety instructions for installation.
• Do not attempt to repair the device yourself; consult your dealer or qualified technician.
• Take all necessary precautions and use personal protective equipment to avoid injury or property damage.
• After installation, verify that all work has been completed correctly according to this manual.
• Use only with a 12 VDC electrical system with a negative ground.
• Disconnect the vehicle's negative battery terminal before making connections.
• When replacing a fuse, use one with the same amperage rating.
• Turn on the unit only when the interior temperature is within a normal range.
• Maintain a listening volume that allows you to hear external vehicle sounds (horns, sirens, etc.).
• Do not connect cables where they might obstruct vehicle safety devices.
• Keep the product out of reach of children.
• Only use the supplied DAB antenna; avoid using different DAB antennas.

Technical Specifications

• Operating System: ANDROID 13
• CPU: OCTACORE 2.5 GHz
• Internal Memory: 64 Gbyte
• RAM Memory: 4 Gbyte
• USB Ports: Double/Triple for multimedia file playback
• Display: QLED 7" capacitive touchscreen monitor
• Resolution: 1280x720 pixels
• Power Output: 4x45 Watts
• Receivers: Integrated SUPER DAB+, FM/AM receiver
• Bluetooth: V5.0 (Handsfree with microphone, A2DP Audio Streaming)
• Internet Access: Via Bluetooth & Wi-Fi connection (Tethering Hotspot)
• Antenna: GPS antenna
• Navigation: ONLINE (via Google Maps), OFFLINE (via iGO)
• Features: OEM rear camera input/recovery, Replica Steering wheel controls, Subwoofer output, Pre-out, 64-band equalizer, Wireless Apple CarPlay, Wireless Android Auto.

Package Contents

The package includes the following items:

• 1. Multimedia System: The main unit.
• 1A. Adapter: Specific adapter for installation.
• 2. Power Wiring Harness: Connects the unit to the vehicle's power.
• 3. CAN Bus Interface Steering Wheel Controls: Pre-connected to Power Wiring 2. Allows integration with vehicle steering wheel controls.
• 4. RCA Output Wiring A: Includes connectors for RCA-FR, RCA-FL, AUX IN R, AUX IN L, SUB-WOOFER, AUX VIDEO IN 1, FRONT CAMERA, MIC, and AMP.
• 5. RCA Output Wiring B: Includes connectors for WI-FI ANTENNA, BLUETOOTH ANTENNA, PARKING, CAMERA, and FAN.
• 6. RCA Output Wiring C: Includes connectors for RCA-RR, RCA-RL, and CAN-TX/CAN-RX.
• 7. AM/FM Antenna: For radio reception.
• 8. DAB+ Antenna: For digital radio reception.
• 9. GPS Antenna: For navigation.
• 10. USB 4 PIN Cable: For connecting USB devices.
• 11. USB 6 PIN Cable: For connecting USB devices.
• 12. Microphone and Fixing Accessories: For hands-free calls and mounting.
• 13. Instruction Manual: This document.

Connections

Before starting connections, identify your MediaStation type by examining the rear panel.

Slim Panel Connections

• 2. POWER: Power input connector.
• 4. RCA A: Connects to RCA Output Wiring A (for FR, FL, AUX IN R, AUX IN L, SUB-WOOFER, AUX VIDEO IN 1, FRONT CAMERA, MIC, AMP).
• 5. RCA B: Connects to RCA Output Wiring B (for WI-FI ANTENNA, BLUETOOTH ANTENNA, PARKING, CAMERA, FAN).
• 6. RCA C: Connects to RCA Output Wiring C (for RR, RL, CAN-TX/CAN-RX).
• 7. GPS ANT: GPS Antenna input.
• 8. WIFI: Wi-Fi antenna input.
• 9. USB: USB port.
• 11. USB 6PIN: USB 6-pin port.
• Other visible ports: 4G+, 4G, OPTICAL.

Large Panel Connections

• 2. POWER: Power input connector.
• 4. RCA A: Connects to RCA Output Wiring A (for FR, FL, AUX IN R, AUX IN L, SUB-WOOFER, AUX VIDEO IN 1, FRONT CAMERA, MIC, AMP).
• 5. RCA B: Connects to RCA Output Wiring B (for WI-FI ANTENNA, BLUETOOTH ANTENNA, PARKING, CAMERA, FAN).
• 6. RCA C: Connects to RCA Output Wiring C (for RR, RL, CAN-TX/CAN-RX).
• 7. ANT: AM/FM Antenna input.
• 8. DAB: DAB Antenna input.
• 9. GPS: GPS Antenna input.
• 14. OPTICAL AUDIO OUTPUT: Not active.
• 15. COOLING FAN: Integrated cooling fan.
• 16. FAN POWER CABLE: Connects to the fan power connector on the RCA Output B Wiring.
• Other visible ports: 4G+, 4G.

Functions

Discover the features of your Customfit Mediastation:

• Android 13 Operating System
• 7" QLED Touchscreen Display
• Wireless Apple CarPlay & Android Auto
• Online Navigation (Google Maps)
• Offline Navigation (iGO)
• Advanced DAB+ Radio
• OEM Rear-View Camera Input
• Steering Wheel Control Integration
• Bluetooth V5.0 (Hands-free, Audio Streaming)
• Wi-Fi Connectivity (Tethering Hotspot)
• USB Multimedia Playback
• Subwoofer and Pre-out connections
• 64-band Equalizer

Disposal

This product is classified as electrical/electronic waste equipment. Comply with applicable regulations when disposing of the device. The product must not be disposed of with unsorted domestic waste or released into the environment.

Approval

CE Approval