LG XD3 25 Built in Dishwasher Owner's Manual

Owner's Manual for LG models including: XD3 25, XD3 15, XD4 15, XD4 24, XD4 14, XD5 24, XD3 25 Built in Dishwasher, Built in Dishwasher, Dishwasher

File Info : application/pdf, 56 Pages, 3.06MB

xd3a25ps user-manual

OWNER'S MANUAL
DISHWASHER
Before beginning installation, read these instructions carefully. This will simplify installation and ensure that the product is installed correctly and safely. Leave these instructions near the product after installation for future reference.
XD3*25** XD3*15** XD4*15** XD4*24** XD4*14** XD5*24**
EN ENGLISH

MFL70282401 Rev.12_031522

TABLE OF CONTENTS

This manual may contain images or content different from the model you purchased.
This manual is subject to revision by the manufacturer.

SAFETY INSTRUCTIONS .......................................................3
IMPORTANT SAFETY INSTRUCTIONS.................................................... 3
INSTALLATION ......................................................................10
Parts ......................................................................................................... 10 Specifications ........................................................................................... 10 Accessories (On Some Models) ............................................................... 11 Preparing Cabinet Opening ...................................................................... 11 Installing Moisture Barrier Tape (On Some Models)................................. 14 Levelling the Appliance............................................................................. 14 Installing the Drain Hose .......................................................................... 15 Connecting the Water Supply Hose.......................................................... 16 Preparing Electrical Wiring ....................................................................... 17 Final Check............................................................................................... 17
OPERATION ...........................................................................18
Before Using the Appliance ...................................................................... 18 Using the Appliance.................................................................................. 22 Control Panel............................................................................................ 23 Cycles....................................................................................................... 25 Cycle Options ........................................................................................... 26 Auto Open Dry (AOD) (On Some Models) ............................................... 27 SignaLightTM (On Some Models).............................................................. 27 Programme Guide (model dependent) ..................................................... 28 Available Options...................................................................................... 28 Information for Energy Test (AS/NZS 2007) ............................................. 29 Loading the Dishwasher ........................................................................... 31 Adding Cleaning Agents ........................................................................... 37 Refilling..................................................................................................... 39 Drying ....................................................................................................... 39
SMART FUNCTIONS .............................................................40
LG ThinQ Application................................................................................ 40 Smart Diagnosis ....................................................................................... 42
MAINTENANCE ......................................................................43
Cleaning the Exterior ................................................................................ 43 Cleaning the Interior ................................................................................. 43 Cleaning the Filters................................................................................... 44 Cleaning the Spray Arms.......................................................................... 45 Cleaning the Water Supply Hose Filter..................................................... 47
TROUBLESHOOTING ...........................................................48
Diagnosing Problems ............................................................................... 48 Error Codes .............................................................................................. 53

SAFETY INSTRUCTIONS

The following safety guidelines are intended to prevent unforeseen risks or damage from unsafe or incorrect operation of the appliance. The guidelines are separated into `WARNING' and `CAUTION' as described below.

This symbol is displayed to indicate matters and operations that can cause risk. Read the part with this symbol carefully and follow the instructions in order to avoid risk.
WARNING This indicates that the failure to follow the instructions can cause serious injury or death.
CAUTION This indicates that the failure to follow the instructions can cause the minor injury or damage to the product.

IMPORTANT SAFETY INSTRUCTIONS
WARNING To reduce the risk of explosion, fire, death, electric shock, injury or scalding to persons when using this product, follow basic precautions, including the following:
Children in the Household
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

EN
Technical Safety ·Observe the information given in "Specifications" regarding the maximum number of place settings to be washed of the dishwasher. ·The water pressure must be between 0.05 and 1.0 MPa.
Installation ·Never attempt to operate the appliance if it is damaged, malfunctioning, partially disassembled, or has missing or broken parts, including a damaged cord or plug. ·If the power cord is damaged or the hole of the socket outlet is loose, do not use the power cord and contact an authorized service centre. ·Do not modify the power cord provided with the appliance. Please contact the LG Customer information centre to advise of its incompatibility. ·This appliance should only be transported by two or more people holding the appliance securely. ·Do not install the appliance in a damp and dusty place. Do not install or store the appliance in any outdoor area, or any area that is subject to weathering conditions such as direct sunlight, wind, or rain or temperatures below freezing. ·Do not plug multiple socket outlets, an extension power cable or adapter with this appliance. ·Disconnect the power cord, house fuse or circuit breaker before installing or servicing the appliance. ·When moving or installing the product in a different location, call qualified service personnel for installation and service. ·Fix the drain hose securely in place. ·This appliance is not designed for maritime use or for mobile installations such as in RVs, trailers, or aircraft. ·This appliance must be positioned near to an electrical power supply. ·When installing or moving the appliance, be careful not to pinch, crush, or damage the power cord.
4

EN
·Use new hose or hose-set supplied with the appliance. Reusing old hoses can cause a water leak and subsequent property damage. ·Improper connection of the equipment-grounding conductor can result in risk of electric shock. Check with a qualified electrician or service personnel if you are in doubt as to whether the appliance is properly grounded. ·This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. ·This appliance is equipped with a power cord having an equipment-grounding conductor and a grounding power plug. The power plug must be plugged into an appropriate socket outlet that is installed and grounded in accordance with all local codes and ordinances. ·After installing, check the hose connection for leaks before moving the appliance into the cabinet opening. ·Do not damage or place heavy items on the power cord of the appliance. ·This appliance is intended to be used in household and domestic applications only and must not be used for commercial purposes. ·For a permanently connected dishwasher: This appliance must be connected to a grounded metal, permanent wiring system, or an equipment-grounding conductor must be run with the circuit conductors and connected to the equipment-grounding terminal or lead to the appliance. ·Connect the ground wire to the green ground connector in the terminal box.
5

EN
Operation ·Immediately unplug the power plug and contact an LG Electronics customer information centre if you detect a strange sound, odour, or smoke coming from the appliance. ·Do not repair or replace any part of the appliance. All repairs and servicing must be performed by qualified service personnel unless specifically recommended in this Owner's Manual. Use only authorized factory parts. ·Do not leave the appliance door open. Children may hang on the door or crawl inside the appliance, causing damage or injury. ·Do not use flammable gas and combustible substances (benzene, gasoline, thinner, petroleum, alcohol, etc.) near the appliance. ·Do not attempt to separate any panels or disassemble the appliance. Do not apply any sharp objects to the control panel in order to operate the appliance. ·Do not bend the power cable excessively or place a heavy object on it. ·Do not put animals, such as pets into the appliance. ·Do not touch the power plug or the appliance controls with wet hands. ·If there is a gas leakage (isobutane, propane, natural gas, etc.), do not touch the appliance or power plug and ventilate the area immediately. ·In case of flood, disconnect the power plug and contact the LG Electronics Customer Information Centre. ·Under certain conditions, hydrogen gas may be produced in a hot-water system that has not been used for two weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot-water system has not been used for such a period, before using the appliance turn on all hot water tap and let the water flow from each for several minutes. This will release any accumulated hydrogen gas. As the gas is flammable, do not smoke or use an open flame during this time.
6

EN
·Keep the area underneath and around your appliances free of combustible materials such as lint, paper, rags, chemicals, etc. ·Some dishwasher detergents are strongly alkaline. They can be extremely dangerous if swallowed. Avoid contact with the skin and eyes and keep children away from the dishwasher when the door is open. Check that the detergent receptacle is empty after completion of the wash cycle. ·Do not operate the appliance unless all enclosure panels are properly in place. ·Use only detergents or wetting agents recommended for use in a appliance and keep them out of the reach of children. ·Do not wash and dry articles that have been soaked in explosive substances such as gasoline, solvents, solvent-based detergent. ·When loading items to be washed: - Locate sharp items so that they are not likely to damage the
door seal. - Load sharp knives with the handles up to reduce the risk of
cut-type injuries. ·Do not wash plastic items unless they are marked "dishwasher safe" or the equivalent. For plastic items not so marked, check the manufacturer's recommendations. ·Do not touch any heating element (where it is exposed) during or immediately after use. ·Do not abuse, sit on, or stand on the door or dish rack of the dishwasher. ·After cleaning the dishes, turn off the tap. Turn on the tap again and check the connection status of water supply hose before cleaning. ·Do not open the door while the appliance is in operation. Water will splash out and could cause a slipping hazard. ·Be careful not to catch your hand when closing the door of the appliance. ·Do not wash and dry articles that have been soaked in explosive substances such as gasoline, solvents, solvent-based detergent.
7

EN
·Do not come into contact with any fitted steam outlet. ·Small parts, such as rack clips and filter retaining posts can be a choke hazard to small children if removed from the dishwasher. Keep out of reach of small children. ·Knives and other utensils with sharp points must be loaded in the basket with their points down or placed in a horizontal position. ·The door should not be left in the open position since this could present a tripping hazard.
Maintenance ·Never unplug the appliance by pulling on the power cable. Always grip the power plug firmly and pull straight out from the socket outlet. ·Securely plug the power plug in the socket outlet after completely removing any moisture and dust. ·Do not spray water inside or outside the appliance to clean it. ·Disconnect the appliance from the power supply before cleaning the appliance. Setting the controls to the OFF or stand by position does not disconnect this appliance from the power supply.
Disposal ·Before discarding an old appliance, unplug it. Cut off the cable directly behind the appliance to prevent misuse. ·Dispose of all packaging materials (such as plastic bags and styrofoam) away from children. The packaging materials can cause suffocation. ·Remove the door before disposing of or discarding this appliance to avoid the danger of children or small animals getting trapped inside.
8

EN
CAUTION To reduce the risk of fire, electric shock, or injury to persons when using your product, basic safety precautions should be followed, including the following:
Installation ·Install the product on a firm and level floor. ·Do not put the drain hose under the dishwasher during installation.
Operation ·Turn off the water tap and unplug the appliance if the appliance is to be left for an extended period of time, such as during vacations. ·Do not place objects on the top of the appliance. ·Do not wipe or coat the surface of the product with liquid detergent or bleach (chlorine bleach, oxygen bleach, etc). Failure to follow these instructions may result in corrosion or discoloration of the coating. ·Do not touch water draining from the machine as it may be hot. ·If the drain hose and the water supply hose are frozen in winter, defrost before using. ·Do not put hands, feet, or metal objects below or behind the appliance. ·Do not wash dishes stained with chemical products such as oil, cream or lotions used in a massage parlor, skin care shop, beauty shop or barber shop.
·
MAINTENANCE ·If cooking oil is spilled on the exterior of the product, wipe it off immediately. Do not clean the exterior of the product with cleaners which contain alcohol, thinners, bleach, benzene, flammable liquids, or abrasives. These substances may discolor or damage the appliance.
·
9

INSTALLATION

Parts

a Control Panel & Door Handle b Front Cover c Lower Cover d Leveling Feet e Drain Hose f Water Supply Hose g Power Cord

Specifications

a Top Wash Impeller b Upper Spray Arm c Lower Spray Arm d Salt Container Cap e Filtration System f Cutlery Basket
(On Some Models)
g Detergent and Rinse Aid
Dispenser
h Cutlery Rack
(On Some Models)
i Upper Rack j Lower Rack k Steam Nozzle (Steam Models)

Model

XD3*25** XD3*15** XD4*15** XD4*24** XD4*14** XD5*24**

Power Supply

220 - 240 V~, 50 Hz

Size

600 mm (W) X 600 mm (D) X 850 mm (H)

Product Weight

52 kg

50 kg

48 kg

47 kg

48 kg

Max. Capacity

15 Place Settings

14 Place Settings

Water Feed Pressure

0.05 - 1.0 MPa

Power Consumption

1600 - 1800 W

· Appearance and specification is may vary without notice to improve the quality of the appliance.

EN
Accessories (On Some Models)

Funnel (All models)

Noise Strip (Lower - 1EA / Front - 1EA / Side - 2EA)

Preparing Cabinet Opening

Min. 600 mm

100 mm

75 mm

820 - 870 mm

600 - 605 mm

Flat and stable area

Cover Felt

Moisture Barrier Tape (Aluminum Tape)

CAUTION
· Any bare wood surrounding the appliance should be sealed with a waterproof paint or sealant to prevent it from swelling.
· Slide the dishwasher into the cabinet, opening carefully. Make sure that the drain hose behind the machine and inside the cabinet is not kinked or stretched.
· Install the appliance on a flat and stable area. Do not place any objects in-between the floor and base or leg off the appliance.
NOTE
· This installation must be conducted by qualified service personnel to ensure it has been installed correctly.
· Do not pull or lift the appliance using the handle; dosing so can damage the door and hinges. Open the door and grab the body frame and the top front opening of the tub to move or lift the appliance.

· Cut out for hoses and electrical cables on either side. (Approximately 100 mm X 75 mm)
· Select a location as close to the sink as possible for ease of connection to the water and drain pipes.
· To ensure drainage, the appliance should not be installed more than 1 meter away from the sink.
· If the appliance is installed in a corner, allow minimum clearance of at least 50 mm between the appliance and an adjacent cabinet or wall.
· Before sliding the appliance into the installation opening, all necessary height adjustments should be made using a spanner.

· Do not push the door of the dishwasher with knees.

Attaching the Strip to the Appliance Base (On Some Models)
To reduce noise attach the strip to the appliance base.
1 Lay down the appliance and pull on both
the hooks at the bottom of the lower cover.

EN
4 Remove the double-sided tape from the
lower and front strips.

5 Attach the black coloured lower strip to the
bottom of the lower cover.

Black lower strip

2 Pull on the lower cover to remove it.

6 Attach the white coloured front strip to the
top of the lower cover.
· The length of the front strip is longer than the lower cover. Attach the front strip so that the overhang is equal on both sides of the lower cover.

3 Remove the double-sided tape on the back
of the felt and attach it to the front side of the appliance's bottom.

White front strip

Black White

7 Attach the lower cover with the strip onto
the appliance.

Attaching the Strip to the Appliance side cabinet (On Some Models)
To reduce noise attach the strip to the appliance sides, if the opening space allows.
1 Remove the double-side tape from the side
strips.

EN
Removing the Top Cover
If the height of the opening is below 850 mm, follow these instructions.
1 Remove the 2 screws on the back.

2 Attach the side strip to the front of the side
cabinet and then push down the side strip so that the side strip adheres well to the cabinet.

2 Pull the top cover backwards after removing
the two screws and then lift it up to remove it.
3 Remove the locating pins on the top by
using a Phillips screw driver.

3 Repeat the above steps for attaching the
opposite side strip to the opposite side cabinet.

NOTE
· When the appliance is correctly leveled, there should be no slant, stickiness or rubbing sound when the door is opened.

Installing Moisture Barrier Tape (On Some Models)
When the appliance is installed without the top cover, the counter top underside may be damaged by steam or condensation when the door is opened.
Install the moisture barrier tape to the underside of counter top to protect the counter top from condensation when the appliance opened.
1 Clean and dry the underside of the counter
top on which the tape will be attached.

EN
Levelling the Appliance
Levelling the appliance prevents unnecessary leakage and poor washing. Place the appliance on a solid, level floor. Do not install the appliance on an elevated surface.
If the appliance is not properly level, adjust all levelling feet as necessary.
Turn them clockwise to raise and counterclockwise to lower until the appliance no longer wobbles, both front-to-back and side-to-side and corner-to-corner.

2 Remove the protective film from the tape.

Levelling feet

NOTE
· The appliance is not level if there is a rubbing sound or stickiness when the door is opened.

3 Install the tape to the underside of the
counter top.

NOTE · Moisture barrier tape is included in the manual
assembly bag. · If the counter top is made of grinite or
waterproof materials, the moisture barrier tape is not required. · Condensation may occur on the underside or along the front edge of the counter top when the room temperature is low.
14

Case 1. The Door is Slanted to the Right
1 Unscrew (counter-clockwise) the rear left
leg and correct the level.
2 Check the opening of door and repeat if
necessary until the door opens and closes properly.
Slant to the right

EN
Installing the Drain Hose
If the end of the drain hose does not fit to the drain line, use a drain extension kit (optional) that is resistant to heat and detergent. This should be available from a plumbing shop or a hardware store.
Connection to the Waste Spigot
Check the waste spigot when initially installing. An OE error can occur when the waste spigot below the sink is not drilled out properly. To connect the drain hose, drill out at least a 15 mm diameter hole in the waste spigot before connecting and securing.

Case 2. The Door is Slanted to the Left
1 Unscrew (counter-clockwise) the rear right
leg and correct the level.
2 Check the opening of door and repeat if
necessary until the door opens and closes properly.
Slant to the left

Waste spigot
CAUTION · Make sure that plastic debris is not remaining
inside of spigot after it has been drilled out. · Do not attempt to open the waste hole with a
screwdriver and hammer. this will induce debris to become stuck and cause a malfunction. · Caution should be taken when passing hoses through Cabinetry holes as they may have sharp edges and could damage the hoses. Smooth or sand edges to avoid damaging the drain or inlet hose.

· Make sure that the line is not kinked or sharply bent.
· Make sure the drain hose is straight before feeding the end of it through the hole for the water supply.

To prevent siphoning, one of the following methods must be used.
Method 1 When the drain hose is connected to a waste spigot, the hose must be looped up to the underside of the bench top and secured.
Bench top

EN
Connecting the Water Supply Hose
Connect the water supply hose to the water tap.
Water tap

300 mm Min. 770 mm 1000 mm

700 mm Min. 1000 mm Max. 300 mm Min.

Method 2 When the drain hose is connected to a separate standpipe, it is essential that an airtight connection be made. If not, it can induce odors.
Air Tight Connection
Standpipe 40 mm diametre Min.

Water supply hose
WARNING · Do not shorten or damage the water supply
hose as it contains electrical wires and components. It can not be detached or removed from the appliance for installation purposes. · It is important that the water supply hose not be tampered with, cut, disassembled, pulled, or kinked. It contains electrical wiring inside and if damaged, can cause an electrical hazard.
CAUTION · Only use the threaded nut of the water supply
hose to tighten it to the tap. · Do not twist or kink the water supply hose
when connecting it to the tap.

CAUTION · This appliance may be fed with either hot or
cold water. If the water connection can not be maintained below 65ºC, the appliance must be connected to cold water. · Use sealant tape or sealing compound on the tap's thread to avoid water leaks. · Make sure that the line is not kinked or sharply bent.
NOTE · Before connecting the water supply hose to
the tap, turn on the tap to flush out foreign substances (dirt, sand or sawdust) in the water lines. Let water drain into a bucket. · It takes about 3 4 minitues for the first supply water.
Preparing Electrical Wiring
Connect the appliance to an earthed socket in accordance with the current wiring regulations, protected by a minimum 15 amp circuit breaker or time delay fuse. Wiring must be two wires with earth. The power cord should not be positioned behind the appliance but within 1.2 meters of the side so that the plug is easily accessible.
WARNING · For personal safety, remove house fuse or
open circuit breaker or switch off power plug before installation. · Do not use an extension cord or double adapter. · The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. · Repairs to the appliance must only be carried out by qualified service personnel. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact our local service centre. · Connect to a properly rated, protected, and sized power circuit to avoid electrical overload.

EN
Final Check 1 Turn on electrical power.
2 Turn on house water supply.
3 The door should open and close smoothly
and without harsh noises, if the unit has been leveled correctly.

4 Run the appliance on a Rinse cycle to verify
proper operation and check for leaks.

Error Code Possible Cause and Solution

Drain hose kinked or pinched.

OE Error

Feed the drainage and supply hoses through the hole under the sink. Then gradually slide the dishwasher into the cabinet while pulling on the hoses under the sink to take up any slack. This helps avoid kinking the hoses or trapping them beneath the dishwasher.

Waste spigot under sink is clogged.

Drill out the waste spigot under the sink.

Water supply line kinked under dishwasher.

IE Error

House water supply not turned on.

Turn water on. Water pressure may be too high or too low.

OPERATION
Before Using the Appliance
This model has a water softener to soften hard water.
NOTE
· The appliance can be used without dishwasher salt if not required, however, the hardness level needs to be set to H0 so that the icon does not remain lit.
· In order to provide satisfactory rinsing results, the appliance requires soft water, i.e., containing little or no lime, otherwise water stains will be left behind on the dishes and inside the appliance.
· If the tap water exceeds a certain level of hardness, it must be softened, i.e., decalcified. This is achieved by adding dishwasher salt to the water softener inside the appliance. The required amount of the salt is set up according to how hard tap water is.

EN
Checking Water Hardness Level
1 Check the water hardness in your area. The
water utility company can help you with this.
2 Set the softening system level of the
appliance according to the water hardness level.

Water Hardness Table

The value of
hardness
0 75 125 250 375

°d
<4 4 - 7 7 - 14 14 - 21 >21

Hardness range

mmol/l

°e

°f

(Ca+Mg)

<0.7

5 - 9

7 - 13 0.7 - 1.3

9 - 17.5 13 - 25 1.3 - 2.5

17.5 - 26 25 - 38 2.5 - 3.8

>26

>38

>3.8

mg/l Ca <29 29 - 50 50 - 100 100 - 150 >150

Water quality
Soft
Hard

Softening system level
H0 H1 H2 H3 H4

Setting the Water Softening System
For effective washing performance, adjust the setting corresponding to the hardness level of water used in water supply. The water softener has 5 adjustment levels, and the appliance is programmed at the factory for a water hardness level of H0. You can check the default setting value and adjust it in the following steps:
1 Press Power and Half Load button
simultaneously. · Current setting value indicated.
2 Press the Delay Start button, and then set
up the intended value. · Scope of setting value is H0 to H4.
3 Press the Start button to save the setting.
· The power turns off after saving.
NOTE · The Salt refill icon turns on in the display
if dishwasher salt is not in the softening system. · If the hardness setting is set to H0, no icon indicates in spite of no salt.

W ater

EN
Filling with Dishwasher Salt
The Dishwasher Salt tank must be filled before starting the washing programme. In case of insufficient salt, the Salt refill icon indicates on the display, unless the hardness level has been set to H0.
CAUTION · Once you have filled with dishwasher salt you
must run the Rinse cycle immediately to remove the salt and the salt water around the inner tub in order to prevent corrosion.
1 Remove the lower rack and remove the cap
of the salt container located on the left side of the filters.
2 Before using the appliance for the first time,
it is necessary to pour 1.0 kg of dishwasher salt and 1 litre of water at the same time if intending to use the water softener system. When refilling the salt, use a funnel. Refer to Before Using the Appliance section.
Salt

3 Refit the cap tightly. 4 Run the Rinse cycle without dishes.

Salt Refill Cycle (1 kg for each load)

Cycles 130

· The table describes information of Auto programme.
· Cycle may vary on the salt refill amount.

CAUTION
· Do not pour any detergent in the water softener. It will cause a malfunction.
· Wipe off any spilled salt around the water softener cap.
· Seal the cap properly by aligning it horizontally and turning it clockwise. A loosely fitted cap may cause the salt solution to leak from the compartment back into the tub and cause corrosion.
· After refilling the dishwasher salt, a wash programme should be operated without dishes, as any spilled salt inside the appliance may cause rust or damage to the appliance if the left unwashed.

EN
Adding Rinse Aid
The Rinse Aid indicator appears in the display when more rinse aid is needed. The use of rinse aid is recommended to prevent water spots on dishes and to enhance drying performance.
1 Open the rinse aid lid by lifting up the flap.
2 Add a liquid rinse aid to the maximum fill
level. The rinse aid should be settled in the dispenser while filling, or air bubbles may result in poor drying performance. Avoid overfilling the dispenser.

NOTE
· The salt can be purchased from salt distributors.

3 Close the lid to lock the dispenser. Rinse
aid is dispensed automatically during the final rinse cycle.

CAUTION · Wipe off any spilled rinse aid to prevent suds.
NOTE · Only use liquid rinse aid in the appliance. · Do not overfill the rinse aid dispenser. · Too much or too little rinse aid can inhibit the
drying performance.

EN
Setting the Rinse Aid Level
The dispenser has five adjustment levels. The appliance is programmed at the factory for a rinse aid dispenser level of 2. This can be checked and altered by using the buttons on the control panel.
1 Ensure the appliance is off.
2 Press Power and Dual Zone
simultaneously to check the current setting.

3 Press Delay Start to change the rinse aid
dispenser setting. Each press of the button changes the setting one step from L0(off) to L4.

4 Once the desired rinse aid dispenser setting
is selected, press Start to save. · The power turns off after saving.

CAUTION · If the rinse aid lid is not closed properly, a
large amount of rinse aid will release into the tub and cause washability problems.
NOTE · The Rinse aid refill icon will illuminate
when more rinse aid is needed. · If you notice cloudy spots, streaks or water
marks on the glassware after washing, increase the setting level. · Setting the control too high can cause foaming, which will cause poor wash performance. · If the glass is smeared or foam is present on the bottom, decrease the level setting. · Setting the rinse aid control too low can cause spotting and streaking on dishes and poor drying performance.

Using the Appliance
1 Press the Power button.
The unit will turn on. Check the indicators.

EN
5 Load the dishes in the rack.
Make certain that no dishes or utensils are in the path of the spray arms. Do not place one dish on top of another.

2 Check that there is rinse aid and
dishwasher salt present. Refill the rinse aid and the salt, if the corresponding icons illuminate. For more information, refer to Refilling section. · : Salt refill icon · : Rinse aid refill icon
3 Open the door and check the filters.
Always clean the filter either after a wash or before a wash so that it does not impair the washing performance.

6 Add the proper amount of detergent
powder to the dispenser.
If using Tablets, they can simply be placed directly on the base of the tub, or on the lower part of the inner door.

25 15

4 Ensure the spray arms can
unobstructedly rotate.
Ensure that the upper spray arms and the lower spray arms rotate well. Remove the spray arm and clean it if it does not rotate.

7 Set and start the programme.
The programme will start automatically in 4 seconds after any setting is selected.
WARNING · Do not load any items in upper rack when the
lower rack is pulled out and loaded. Failure to do so may result in injury as the appliance could become unbalanced and topple over. · Push the upper rack in all the way. · Empty the lower rack first and then the upper one. It will avoid water dripping from the upper rack onto the dishes below. · Do not open the door during operation or right after it has completed the wash cycle as the steam may cause scalding as the door is opened.
NOTE · Never use liquid dishwashing detergent in the
appliance.

EN
Control Panel
Non-Steam Models (Models : XD3*15**, XD4*14**, XD4*15**)

Steam Models (Models : XD3*25**, XD4*24**, XD5*24**)

· Depending on the model, the logo or the top of the door.

and may be located either on the front of the appliance

a Power
· Briefly touch Power button to turn power on and off.
· After the cycle is complete, the power automatically turns off for purposes of safety and economy.
· If there is a power surge, power outage, or disruption of any kind, power is automatically turned off for safety.
· When power is connected again, it will turn on automatically and resume the cycle.
b Display
· : Digial Display
- The digital display on the control panel shows the ESTIMATED cycle time. When the cycle and options are selected, the display shows the total estimated time to complete those selections. During operation, the display shows the remaining estimated operating time.
- The estimated time shown on the display does not include delay times for heating water, etc.
- If Delay Start is selected, the display shows the delay time in hours.
- The Auto cycle time may vary depending on the soil level of your load.
· : Rinse Aid Icon
- This icon flashes when the rinse aid level is low. The LED automatically shuts off when the rinse aid is refilled or the level is set to 0.

EN
· : Machine Clean Icon - This icon flashes after every 30 cycles. - To activate or deactivate the icon, press the Delicate button for 3 seconds.
· : Wi-Fi - When the appliance is connected to the internet through a home Wi-Fi network, this icon illuminates.
· : Salt refill Icon - This icon flashes when the salt level is low. The LED automatically shuts off when the salt is refilled.
c Cancel · The drain pump activates and the cycle
cancels. Once the appliance finishes draining, the power turns off. · Press and hold Start button for 3 seconds to activate the cancel function.
d Start · To operate the appliance, either (depending
on display type) press the Start button and close the door or close the door and press the Start button. · If Start button is not pressed to start the cycle within 4 minutes, the power will automatically turn off.
Chime On/Off · To activate or deactivate the button sounds,
press and hold Dual Zone and Energy Saver simultaneously for 3 seconds. The error alert sound cannot be turned off.

Cycles
Auto
This cycle senses the soil amount and water clarity and optimizes the wash to achieve the best cleaning. The wash time may vary depending on the soil level.
Intensive
This cycle is for heavily soiled dishes and dishes with hardened on soil. The Heavy cycle defaults to the strongest spray intensity and uses it to wash heavily soiled dishes.
Delicate
Use this cycle to clean delicate items such as fine china and stemware.
Refresh
This cycle freshens up and warms dishes that have been unused for a long time.
· Do not use detergent when using this cycle.
Eco
· It provides the most efficient energy and water consumption for a good washing performance and drying result on a normally soiled load and as it uses very little energy.
· Eco cycle and the Energy Saver option are suitable for a normally soiled load.
Turbo
This cycle will clean moderately soiled dishes using slightly more energy and water. · Extra Dry is set to on as default. If you do not
want to dry dishes after washing, turn off the Extra Dry option. Not drying the dishes will result in a shorter cycle time.

EN
Download Cycle
Use a dedicated cycle downloadable via Wi-Fi or NFC. (depending on model). NOTE · Only the cycle code for the currently
downloaded cycle appears on the appliance. See the smartphone app for cycle codes, names, and more information about the available cycles. - Default Cycle: P1. Pots & Pans
Machine Clean
This cycle is for cleaning the inside of the appliance. Use the cycle without dishes in the appliance. It eliminates residual soils, odor, white spots, and other dirt. Add citric acid or another cleaning agent for more effective results. · Press and hold Intensive for 3 seconds to
activate.
Rinse
This cycle is a quick rinse only for dishes that will not be washed immediately. The cycle rinses dishes that have excess soil to soften dried on residue. Rinsing the dishes helps prevent odors in the appliance. Do not use detergent with the Rinse function. · This cycle does not have drying. · Press and hold Eco for 3 seconds to activate.
Express
This cycle will quickly clean lightly soiled dishes. · This cycle does not have drying. Select the
Extra Dry option or another cycle for better drying. Extra Dry will add to the overall cycle time. · Press and hold Turbo for 3 seconds to activate. · Detergent tablets are not recommended for use of Express cycle. If the detergent tablets are used, it may cause detergent residue on dishes due to the relatively low rinse temperatures.

Cycle Options
Select the desired cycle button and then select the options for that cycle. For more information about Cycle Options, see the Available Options section.
Dual Zone
This option automatically sets the spray intensity to soft for the upper spray arm and strong for the lower spray arm. Place heavily soiled dishes like plates and bowls in the lower rack and lightly soiled dishes like cups and small plates in the upper rack to get the best results.
Half Load
This option washes intensively by selecting the upper or lower racks. For small loads, use just the upper or lower rack to save energy and time. By pressing the Half Load button, the settings (Upper) , (Lower) and the cancellation of the Half Load option are available.
Energy Saver
This option saves energy by reducing the wash and rinse temperatures. Wash time is increased to maintain wash performance. Do not use this cycle with heavily soiled dishes.
Steam
This option adds steam during the cycle to improve wash performance.
High Temp
Raises the main wash or heating rinse temperature to improve cleaning. · A chime will sound to alert you of any residual
temperatures inside the appliance. Wait for the appliance to completely cool down before opening the door.

EN
Extra Dry
Select the Extra Dry option for better drying performance. This option adds Extra Drying time to the cycle and raises the heating rinse temperature. · When the rinse aid is empty, the Extra Dry
option is selected automatically.the door.
Delay Start
The Delay Start feature delays the start of a selected cycle. Each time the Delay Start button is pressed, the delay time increases by an hour. The delay time can be set from 1 to 12 hours, in one-hour increments. · To cancel the Delay Start, turn the power off. · To change the cycle and cycle option, open
the door and then select another cycle and cycle option. The countdown will continue.
Control Lock
The Control Lock feature helps prevent settings from being changed during a cycle. Selecting this feature locks all of the buttons, except for the Power button, on the control panel. This feature does not lock the door. · On models with the external display, while a
cycle is running, press and hold Half Load and Energy Saver simultaneously for 3 seconds to activate or deactivate Control Lock. On models with a concealed display, open the door during operation and follow the same instruction. · When the Control Lock feature is activated, the display code will show on the display. · To start a new cycle, deactivate Control Lock. · Control Lock button can be set at any time by turning on the appliance.
Wi-Fi
Press and hold Delay Start for 3 seconds to connect to the network. Refer to SMART FUNCTIONS sections for detailed information about this feature.

Auto Open Dry (AOD) (On Some Models)
The Auto Open Dry feature enhances the drying performance by opening the door automatically during the drying stage within the displayed program time. For optimum drying results wait until the program ends before unloading the dishwasher. The program is fully complete when the display shows "End". The door opening time varies depending on the program selected. · The AOD feature is not available in all models. · To activate or deactivate AOD feature, press
and hold the Energy Saver button and the High Temp button simultaneously for 3 seconds. · The AOD feature is not available when the Machine Clean and Rinse cycle is selected. · When you select the Download Cycle, the AOD feature may operate even if the feature is deactivated. Because the Download Cycle is designed to achieve the best performance in a specific purpose regardless of appliance settings. · The display shows whether the AOD feature is on or off.
WARNING · Keep children away from the appliance while
the appliance is operating. Exposure to high temperature steam may cause scalding or burns.

EN
SignaLightTM (On Some Models)
SignaLightTM shows the status of the appliance, whether it has encountered any problems, whether it is operating normally, or whether it is ready to wash dishes. · Depending on the model, the lamp may be
located either on the front of the appliance or the top of the door.

Red (left)
· The red lamp flashes when the appliance encounters an error. For more information about the error, see the Error Code part of the TROUBLESHOOTING section.

White (middle)
· The white lamp flashes when you select an option cycle or when a cycle has been paused.
· The white lamp lights up when a cycle is running.

Green (right)

· The green lamp lights up when a cycle is finished. When the door is opened, the lamp turns off.

· Turn the power on, and then press and hold the High Temp button for 3 seconds until shows on the display.

- The default setting is on

. When

shows on the display, the green lamp stays

on for 90 seconds after the cycle has

finished.

- You can set the lamp setting to

on the

display so that the dishwasher keeps the

green lamp on until the door is opened

manually. (and the Auto Open Dry feature is

set to OFF).

Programme Guide (model dependent)

Wash

Rinse

Programme Soil Level Pre wash Main wash

Rinse

Heating rinse

Dry

Auto

All levels

(50 - 55 °C)

(70 °C)

Intensive

Heavy

(75 °C)

(70 °C)

Delicate

Light

(45 °C)

(60 °C)

Refresh

(75 °C)

Eco

Moderate

(53 °C)

(70 °C)

Turbo

Moderate

(65 °C)

Express

Light

(45 °C)

(60 °C)

Rinse

Light

Machine Clean

(50 °C)

(70 °C)

· Running time may vary according to the water temperature, ambient temperature, water pressure and voltage. · When the Auto Open Dry(AOD) feature is activated, the heating rinse temperature will be changed as 62°C.

Available Options

Programme Auto

Dual Zone

Half Load

Energy Saver

Options Steam

High Temp

Extra Dry

Delay Start

Intensive

Delicate

Refresh

Eco

Turbo

Express

Rinse
Machine Clean
Download Cycle
· The Energy Saver option is not available with the High Temp or Extra Dry option.

Information for Energy Test (AS/NZS 2007)
Appliance loaded in accordance with standard specifications.

Upper Rack

For Model with Cutlery Rack
· Model : XD3*15**, XD3*25** · Capacity: 15 place settings · Comparability course: Eco + Energy Saver · Rinse Aid setting: L4 · Reference cleaner: 27.5 g of detergent onto
the inside surface of the door and 5 g of detergent into the dispenser. · Height-adjustable Rack-U position: middle · Auto Open Dry(AOD) setting: On
· Model : XD4*15** · Capacity: 15 place settings · Comparability course: Eco + Energy Saver · Rinse Aid setting: L4 · Reference cleaner: 27.5 g of detergent onto
the inside surface of the door and 5 g of detergent into the dispenser. · Door is opened at the end of the drying cycle for the drying performance test. (Door position: Open 50 mm) · Height-adjustable Rack-U position: middle

a Glasses b Cups c Saucers
Lower Rack

Cutlery Basket

d Dinner plates e Soup plates f Dessert plates
29

For Model without Cutlery Rack
· Model : XD4*14**, XD4*24**, XD5*24** · Capacity: 14 place settings · Comparability course: Eco + Energy Saver · Rinse Aid setting: L4 · Reference cleaner: 27.5 g of detergent onto
the inside surface of the door and 5 g of detergent into the dispenser. · Door is opened at the end of the drying cycle for the drying performance test. (Door position: Open 50 mm) · Height-adjustable Rack-U position: uppermost

Upper Rack

Cutlery Basket

a Glasses b Cups c Saucers d Dessert plates
Lower Rack

d Dessert plates e Dinner plates f Soup plates
30

Loading the Dishwasher
For effective washing performance, always follow the instructions.
· Remove large particles of food debris from plates including bones etc. before loading. Always rinse off plates when loading if they are not to be washed immediately.
· Items with burnt on food should be soaked prior to loading in the appliance.
· Deep based items should be placed upside down.
· Plastic items will not dry well, compared to other items.
· Make sure that all items do not touch each other.

EN
For Model with Cutlery Rack

For Model without Cutlery Rack

Non appliance safe items
The combination of high water temperature and appliance detergents may damage certain items. Do not wash the following items. · Copper or anodised aluminium · Hand painted silver or gold leaf crockery · Wood or bone handled utensils · Iron or non rust proof utensils · Plastic items which are not appliance safe · Expensive ware such as silver and dishes with
golden rings · Fragile item such as crystal glasses
CAUTION · Do not place pots or pans with plastic handles
in the appliance as the handles may deteriorate due to the heat and detergent. · Water proof or long lasting lipstick smudges on glasses may not be removed during the wash.

EN To make it easier to load larger dishes, the front row of tines can be folded down.
CAUTION · Do not obstruct the rotation of the spray arms.

Loading the Lower Rack
Daily Use Load The lower rack is suitable for dinner plates, soup bowls, dishes, pots, pans, lids and even a grill tray. Plates should be positioned upright and facing the centre of the rack and pots, pans and large dishes must be turned upside down.

Folding Down the Rack Tines (Optional)
Fold tines down to fit larger dishes; pull tines back up to fit smaller dishes.

Loading the Upper Rack
Daily Use Load The upper rack is suitable for delicate items such as, small plates, long cutlery, cups, glasses and appliance safe plastic items. Cups, glasses and bowls must be positioned upside down. Plates should be positioned upwards with the plate.

EN The cup racks provide support for long steam glasses.
The left side row of tines can be folded down or the cup racks can be folded up out of the way for tall crockery items.

CAUTION · Do not obstruct the rotation of the spray arms.

Removing and Replacing Cup Racks
The left and right cup racks are interchangeable and can be removed.
1 Slide cup rack down into its closed position.

EN
Height Adjustable Upper Rack
The height of the upper rack can be adjusted when you load glasses with long stems or tall crockery items. There are three available positions for adjusting the height of the upper rack to create more space.

3 2
1

12 3

2 Locate assembly slot on cup rack and firmly
pop rack off support bar on that side.
· The rack on the left pops free at the back. The rack on the right pops free at the front.

Lowering the Rack
Hold the rack at the centre of each side to support its weight. Then, push the button on each side to release the rack and lower it to the lower position.

3 Slide cup rack off support bar on opposite
side.

Raising the Rack
Lift the rack at the centre of each side until the rack locks into place in the upper position. It is not necessary to lift the lock levers to raise the rack.

4 Reverse instructions to replace cup rack.
34

Possible plate size according to the upper rack position

Upper Rack Position
Upper Middle Lower

Plate Size (mm)

Upper Rack

with Cutlery
Rack
165 193 221

without Cutlery
Rack
215 243 271

Lower Rack
300 272 244

WARNING
· Before adjusting, ensure the rack is empty of all dishes. Otherwise dishes may get damaged or you may get injured.

EN
NOTE
· Before pushing the upper rack into the appliance, ensure the rack height is the same on both sides. If the height is not the same on both sides, the appliance door will not shut and the upper spray arm will not connect to the water inlet.
· Raise the upper rack without pushing the buttons on each side. Pushing the buttons when raising the rack will prevent the rack from locking into position.
· To set the rack to the middle position, it may be easier to lower the rack all the way down and then raise each side of the rack individually until it clicks into place.

· There is a 56 mm gain in height when the upper rack is moved to the lower position.
· After adjusting the rack levels, check that the spray arms are free to rotate.
· With the lower position of the upper rack, check if the bottom part of upper rack including spray arm is not disturbing items on the lower rack.
· When the upper rack is in the lower position, push in the upper rack first, and the lower rack later.
· Pull out the lower rack first, and the upper rack later.
· Raise the upper rack without pushing the buttons on each side. Pushing the buttons when raising the rack will prevent the rack from locking into position.
· When the upper rack is in the lower position, the possible height of dishes differs with models where the cutlery rack is fitted.

Loading the Cutlery Basket (On Some Models)
Daily Use Load For Large utensils, such as whisks, the cover can be opened by being unhinged. Place forks and spoons in the cutlery basket with their handles downwards.

EN
Loading the Cutlery Rack (On Some Models)
The cutlery rack is best suited for flatware and most cooking or serving utensils. It can also fit small prep bowls and lids. The separators on the cutlery rack help keep utensils separated to avoid damage and improve cleaning.

WARNING · To prevent injuries, place knives and other
utensils with sharp points on the cutlery basket. · If you want to load them in the cutlery basket, place them with the pointed edges facing downwards.
CAUTION · Do not obstruct the rotation of the spray arms. · The cutlery shouldn't be longer than 18 cm.

If the handles of your cutlery are too thick, then reverse the pieces so that the handles face the other direction.

Max. 18cm

Height Adjustable Tray (On Some Models)
The tray on the left side can be adjusted to a high or low position to accommodate utensils or cutlery of different sizes. Remove dishes before adjusting the tray. Adjust the tray by sliding the lever.

EN
Adding Cleaning Agents
Adding Detergent to the Dispenser
· Remove the label on the dispenser prior to running the appliance for the first time.
· The amount of detergent needed depends on the cycle, load size, and soil level of dishes.
· Put detergent into the detergent compartment before starting any cycle, except the Rinse cycle.
1 Push the button on the dispenser lid to
open the cover.

Removing the Cutlery Rack (On Some Models)
The entire cutlery rack can be removed if more space is needed on the upper rack for larger items.
Always remove the cutlery from the rack before removing the rack.
Pull the rack out to the end of the rails. Then, lift the front of the rack so that the rollers clear the stop on the end of the rail. The rack can now be slid forward and removed from the rails.

2 Add dishwashing detergent to the main
wash compartment until the level is between the lines marked 15 and 25. · Fill to over the 25 line for hard water or
heavily solied loads. · Fill to the 15 line for soft water or lightly
solied loads.
25 15

3 Push the detergent lid to slide the lid closed
until it clicks.
WARNING · Be careful when loading and unloading items
with sharp edges. Load sharp knives with the blade down to reduce the risk of injury.

4 If a prewash is desired, fill the recessed
prewash compartment area on the lid with detergent.

EN
CAUTION · Use only detergent intended for dishwashers.
Incorrect detergent may cause the appliance to fill with suds during operation. Excess suds may reduce wash performance and may cause the appliance to leak.
· To avoid damaging the appliance, do not pull up on the dispenser to close the appliance door.

Programme
Auto Intensive Delicate Refresh
Eco Turbo Download cycle Machine clean Rinse Express

Amount of detergent

Pre wash Main wash

(onto the lid) (dispenser)

5 g

20 g

5 g

30 g

5 g

20 g

25 g

5 g

20 g

5 g

20 g

5 g

20 g

WARNING
· Dishwasher detergent and rinse aid contain chemical components, like all other household detergent. So, they must be kept out of the reach of children.

· Use of an unsuitable detergent and rinse aid may result in a risk of damage, corrosion, poor washing performance, poor drying or leakage.
· Only use the detergent and rinse aid that has been qualified with standard. Use of an unqualified detergent and rinse aid may present a risk of damage, corrosion, poor washing performance, poor drying, and leakage.
NOTE
· Too much detergent can leave a film on dishes and in the appliance, resulting in poor wash performance.
· After washing, check whether the detergent was completely washed out.
· Some appliance detergent tablets may become stuck in the dispenser due to their excessive size. Tablets can be placed onto the base of the wash tub next to the filter before starting the cycle.
· Never use liquid dishwashing detergent in the appliance.
· Detergent tablets are not recommended for use of Express cycle. If the detergent tablets are used, it may cause detergent residue on dishes due to the relatively low rinse temperatures.

Refilling
To maintain the effective wash performance of the appliance, check and refill dishwasher salt regularly. To maintain the effective dry performance of the appliance, check and refill rinse aid regularly.
Checking the Rinse Aid
When the Rinse aid refill icon illuminates lit, it means the rinse aid is almost empty. If necessary, refill the rinse aid chamber.
Checking the Dishwasher Salt
After refilling the dishwasher salt, a wash programme should be operated without dishes, as any spilled salt inside the appliance may cause rust or damage to the appliance if the left unwashed. When the Salt refill icon illuminates, it means the salt is almost empty. If necessary, refill the salt chamber.
CAUTION · Do not add detergent or any other solution
into the water softener housing other than dishwasher salt. Doing so will cause the water softening system to malfunction.

EN
Drying
· Plastic items may cause poor drying performance compared to other items.
· To assist drying, we recommend that the door be partially opened after the cycle.
NOTE · Make sure that all items do not touch each
other. · If dry performance is not good or water stains
remain, add the Extra Dry option or set the rinse level. · When using tablet type (2 in 1, 3 in 1) detergent, an additional rinse may be required, depending on the volume of dishes, in this case use the Extra Dry option or set the rinse level.

SMART FUNCTIONS
LG ThinQ Application
This feature is only available on models with the or logo. The LG ThinQ application allows you to communicate with the appliance using a smartphone.
LG ThinQ Application Features
Communicate with the appliance from a smartphone using the convenient smart features.
Monitoring Check the current status, cycle, options running time and cycle end time for the application on a single screen.
Download Cycle Download one of many new special cycles that are not included in the basic cycles on the applicance. Appliances that have been successfully registered can download a variety of specialty cycles specific to the appliance. Only one downloaded cycle can be stored on the appliaice at the same time. Once cycle download is completed in the appliance, the appliance keeps the downloaded cycle untill a new cycle is downloaded.
Machine Clean Reminder This function shows how many cycles remain before it is time to run the Machine Clean cycle.
Smart Diagnosis This function provides useful information for diagnosing and solving issues with the appliance based on the pattern of use.
Settings Set the Rinse Aid Dispenser Level, Softening Level, Machine Clean Reminder, Chime Sound and Clean Indicator Light.
Push Alert Turn on the Push Alerts to receive appliance status notifications. The notifications are triggered even if the LG ThinQ application is off.

EN
NOTE · If you change your wireless router, internet
service provider, or password, delete the registered appliance from the LG ThinQ application and register it again. · The application is subject to change for appliance improvement purposes without notice to users. · Functions may vary by model.
Before Using LG ThinQ Application
1 Check the distance between the appliance
and the wireless router (Wi-Fi network). · If the distance between the appliance and
the wireless router is too far, the signal strength becomes weak. It may take a long time to register or installation may fail.
2 Turn off the Mobile data or Cellular Data
on your smartphone.
3 Connect your smartphone to the wireless
router.

NOTE
· To verify the Wi-Fi connection, check that the icon on the control panel is lit.
· The appliance supports 2.4 GHz Wi-Fi networks only. To check your network frequency, contact your Internet service provider or refer to your wireless router manual.
· LG ThinQ is not responsible for any network connection problems or any faults, malfunctions, or errors caused by network connection.
· If the appliance is having trouble connecting to the Wi-Fi network, it may be too far from the router. Purchase a Wi-Fi repeater (range extender) to improve the Wi-Fi signal strength.
· The Wi-Fi connection may not connect or may be interrupted because of the home network environment.
· The network connection may not work properly depending on the Internet service provider.
· The surrounding wireless environment can make the wireless network service run slowly.
· The appliance cannot be registered due to problems with the wireless signal transmission. Unplug the appliance and wait about a minute before trying again.
· If the firewall on your wireless router is enabled, disable the firewall or add an exception to it.
· The wireless network name (SSID) should be a combination of English letters and numbers. (Do not use special characters.)
· Smartphone user interface (UI) may vary depending on the mobile operating system (OS) and the manufacturer.
· If the security protocol of the router is set to WEP, you may fail to set up the network. Please change it to other security protocols (WPA2 is recommended) and register the product again.

Installing the LG ThinQ Application
Search for the LG ThinQ application from the Google Play Store or Apple App Store on a smart phone. Follow instructions to download and install the application.
· Follow instructions to download and install the application.

Wireless LAN Module Specifications

Model Frequency Range
Output Power(Max)

LCW-003
2412 to 2472 MHz
IEEE 802.11b:18.37 dBm IEEE 802.11g:17.67 dBm IEEE 802.11n:17.67 dBm

RF Radiation Exposure Statement
This equipment shall be installed and used at a minimum distance of 20 cm from the human body.
Open Source Software Notice Information
To obtain the source code under GPL, LGPL, MPL, and other open source licenses that have the obligations to disclose source code, that is contained in this product, and to access all referred license terms, copyright notices and other relevant documents please visit https:// opensource.lge.com.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com.
This offer is valid to anyone in receipt of this information for a period of three years after our last shipment of this product.

Smart Diagnosis
This feature is only available on models with the or logo. Use this feature to help you diagnose and solve problems with your appliance.
NOTE · For reasons not attributable to LGE's
negligence, the service may not operate due to external factors such as, but not limited to, Wi-Fi unavailability, Wi-Fi disconnection, local app store policy, or app unavailability. · The feature may be subject to change without prior notice and may have a different form depending on where you are located.
Using LG ThinQ to Diagnose Issues
If you experience a problem with your Wi-Fi equipped appliance, it can transmit troubleshooting data to a smartphone using the LG ThinQ application. · Launch the LG ThinQ application and select
the Smart Diagnosis feature in the menu. Follow the instructions provided in the LG ThinQ application.

2 Hold the mouthpiece of your phone over
the Smart Diagnosis icon. Do not touch any other buttons.
Max. 10 mm
3 Press and hold Download Cycle until a
countdown displays on the appliance.
4 Keep the phone in place until the tone
transmission has finished. The display will count down the time.Once the countdown is over and the tones have stopped, the diagnosis will be displayed in the application.
NOTE · For best results, do not move the phone while
the tones are being transmitted.

Using Audible Diagnosis to Diagnose Issues
Follow the instructions below to use the audible diagnosis method.
· Launch the LG ThinQ application and select the Smart Diagnosis feature in the menu. Follow the instructions for audible diagnosis provided in the LG ThinQ application.
1 Press the Power button to turn the
appliance on. Do not press any other buttons.

MAINTENANCE
To maintain performance and prevent problems, check the outside and inside of the appliance, including filters and spray arms regularly.
WARNING · When cleaning the outside and inside of the
appliance, do not use any solvent based solutions such as thinners or accetone. It may cause fire or explosion.
NOTE · If you have not used the appliance for a long
time, refresh the inside by running Turbo or Machine Clean programme with detergent. When the cycle is finished, clean the inside and outside of the appliance according to the Maintenance instructions. · Prevent animals from nibbling on the power cable or water hose.

EN
Cleaning the Interior
Clean the interior of the appliance periodically with a soft, damp cloth or sponge to remove food and dirt particles. Food residue may be stuck in the narrow gaps inside the appliance after completion of washing. Wipe off all food residue.

Cleaning the Exterior
In most cases, the exterior of the appliance can be cleaned with a soft damp cloth or sponge, then dried with a soft cloth. If the appliance has a stainless steel exterior, use a stainless steel cleaner.
CAUTION
· If cooking oil is spilled on the exterior of the product, wipe it off immediately. Do not clean the exterior of the product with cleaners which contain alcohol, thinners, bleach, benzene, flammable liquids, or abrasives. These substances may discolor or damage the appliance

Using Citric Acid
Remove all dishes, cutlery basket and cutlery basket holder from appliance. Only racks should remain in tub. For best results, use citric acid powder (can be found in canning sections of most supermarkets or online). Measure 3 tablespoons (45 g) of citric acid powder. Fill main wash compartment with measured powder.
25 15

Using White Vinegar
If you cannot find citric acid powder, pour approximately 3/4 - 1 1/4 cups (200-300 mL) of white vinegar into shallow bowl and place in upper rack. Run Auto cycle. Do not use detergent. When the cycle is finished, restart.

EN
Cleaning the Filters 1 Remove the lower rack and position the
bottom spray arm so a wider vee is open to the front.
2 Turn the inner filter counter-clockwise and
take out the assembled inner filter and stainless steel filter.

CAUTION
· Do not pour Vinegar directly into the base.
· Excessive use of vinegar may cause damage to the appliance.

3 Clean the filters with a soft brush under
running water. Reassemble the filters before reinstalling them.

Seasonal Maintenance and Storage
· If you will be absent for an extended period of time during warmer months, close the water valve and unplug the power cord, or turn off the circuit breaker. Clean the filter, tub and dispenser to prevent odor.
· If you will be absent for an extended period of time during colder months and there is a possibility of freezing temperatures, winterize the water supply lines and the appliance itself. Winterization must be performed by qualified service personnel.

4 To replace the assembled filters, position
the spray arm so the wider vee is toward the front. Fit the filters back into the filter holder and secure them by turning the inner filter clockwise until it clicks into place.

WARNING · Be cautious of sharp edges when handling the
stainless steel filter.
CAUTION · After using the appliance, particles of food are
filtered by the filters. Any unremoved food residue may cause bad smell. In addition, drainage may have a problem due to food residue stuck in the filters.
NOTE · When assembling, rotate it firmly until it clicks.

Cleaning the Spray Arms
If the spray arm holes are blocked by any food residue, dishes may not be cleaned well due to improper water spray. It is recommended that the spray arms be cleaned once every two weeks.
Cleaning the Lower Spray Arm
1 Make sure that the water jet holes are not
blocked by food particles.
2 If any food residue blocks the spray arm
holes, remove it with a pin or any sharp tool.

CAUTION
· To avoid breaking the variable angle spray arm end sections, do not pull or manually rotate them.

Cleaning the Upper Spray Arm
1 Pull the upper rack forward. Make sure that
the water jet holes are not blocked by food particles.

EN
6 After cleaning the upper spray arm, press it
up into place. Turn the nut 1/8 turn clockwise to make sure that the nut locks back into place.

2 When cleaning is necessary, remove the
upper spray arm by turning the nut on the bottom of the spray arm 1/8 turn counterclockwise and pulling down.

7 After assembly, check whether the spray
arms rotate freely.
3 Remove food particles by rinsing or shaking
the spray arm.
4 If any food residue blocks the spray arm
holes, remove it with a pin or any sharp tool.

5 After removing the food residue, clean the
spray arms holes under running water.

EN
Cleaning the Water Supply Hose Filter 1 Unplug the appliance. 2 Turn off the water tap. 3 Unscrew the water supply hose. 4 Remove the seal and the plastic filter with a
pair of small pliers or scissor grips.
5 Refit the filter and gasket and make sure
that it is sitting correctly.
6 Refit and secure the water supply hose in
reverse order. Do not use any mechanical device to tighten the hose. A soft cloth can be used to assist hand tightening. NOTE · A filter is fitted into the inlet of the water supply hose connection. · If insufficient water flows into the appliance, check that the filter is not blocked. · If there is a leak, the water supply hose will need to be checked for proper connection. · Never over tighten the water supply valve or use mechanical devices to tighten. · When reassembling the seal and the filter, ensure that they free from dirt or grit that may have come from the water supply.
47

TROUBLESHOOTING

The appliance is equipped with an automatic error-monitoring system to detect and diagnose problems at an early stage. If the appliance does not function properly or does not function at all, check the following before you call for service:

Diagnosing Problems

Problem

Possible Cause

Solutions

Door is not completely closed.

· Level the appliance again.

Power supply or power cord is not connected.

· Connect the power supply or cord properly.

Appliance will not operate. When the Control Lock feature is activated, the display code will show on the display.

· Deactivate the Control Lock button. · Press and hold Half Load and
Energy Saver simultaneously for 3 seconds to activate or deactivate Control Lock.

Fuse is blown or circuit breaker tripped.

· Replace the fuse or reset the circuit breaker.

Appliance continuously beeps when the door is opened, during or right after a cycle has completed.

The contents of the

· Close the door until the appliance

appliance are hot and care and dishes have cooled down. The

should be used when

beeping will stop if the door is closed

placing your hands inside or the interior temperature has

the appliance.

cooled.

Drain hose is kinked or clogged.

· Adjust hose or clear blockage.

Water remains in sump after completion of cycle.

Water may remain if the power supply was lost before normal end of the course or was manually disconnected.

· Re-start the course.

Sprays arms do not rotate Holes of spray arms are

smoothly.

blocked by food particles.

· Clean the holes of spray arms.

Upper rack is crooked.

Rack is poorly adjusted.

· See the Height Adjustable Upper Rack section.

Lamps do not illuminate. Power is not connected. · Connect power supply.

There is excessive foam inside the appliance.

Failure to use the detergent exclusive for appliance.
An excessive amount of rinse may cause foam.

· Use the detergent exclusive for appliance.
· Reduce the rinse aid dispensing level.

Problem
Detergent is left in the detergent dispenser.
Water leaks outside the appliance.
Cloudiness on glassware. Black or gray marks on dishes. Yellow or brown film on inside surfaces of appliance. Yellow water remains inside the dishwater

Possible Cause

Solutions

Unbalanced upper rack.

· Adjust the left/right height of the upper rack.

Detergent may not be dispensed because poor stacking of the dishes prevent automatic opening of the detergent dispenser.

· Correctly arrange the dishes and always dry out the dispenser before adding new detergent so that it does not clump together.

The door may not be closed due to tilted appliance. In this case a water leak may occur.

· Check the leveling by adjust the leg.

Wrong installation of drainage hose may cause water leak.

· Check the connecting part of drainage hose.

If the power is off, a water

leak may be caused by a · Check the connection water supply

poor connection to the

hose.

tap.

Combination of excessive detergent and hard water.

· Use less detergent and use a rinse aid to minimize the problem.
· Check the setting of softening system.

Aluminum items rubbing dishes during cycle.

· Reposition the dishes.

Coffee or tea stains.

· Eliminate the stain by using a stain removal product.

When initially using the appliance, Yellow water may generate in the water softener tank.

· This is a normal condition, and it is harmless to humans. It disappears after 1~3 cycles.

Problem
Spots and filming on dishes.

Possible Cause

Solutions

Wrong amount of detergent used.

· Use the recommended amount of detergent.

Overloading.

· Do not overload the appliance.

Improper loading.

· See the Operation section.

Insufficient water pressure.

· Water pressure should be between 0.05 and 1.0 MPa.

Insufficient detergent.

· Add the recommended amount of detergent. See the Operation section.

Rinse aid dispenser is empty.

· Refill rinse aid dispenser.

The water softener has no · Check whether there is the salt in salt or insufficient the salt. the water softener.

Water hardness level may · Increase the hardness level setting

be set too low.

value.

The rinse aid may be insufficient.

· Refill the rinse aid or increase the dispensing level.

Hard water buildup in the tub

· Remove all dishes, cutlery basket and cutlery basket holder from appliance. Only racks should remain in tub. For best results, use citric acid powder (can be found in canning sections of most grocery stores or online). Measure 3 tablespoons (45 g) of citric acid powder. Fill main wash compartment with measured powder. If you cannot find citric acid powder, pour approximately ¾ - 1 ¼ cups (200-300mL) of white vinegar into shallow bowl and place in upper rack. Run Auto cycle. Do not use detergent. When the cycle finish, run it again.

Problem Odor
Food soil remains on dishes.

Possible Cause

Solutions

The previous cycle was stopped before completion and residual water remains in the appliance.

· Turn on the power, run the Cancel cycle option to remove the residual water, then run the Quick cycle using detergent but with the appliance empty.

There is food in the bottom of the unit or in the filter.

· Clean the filter and the interior according to the Maintenance section of the owner's manual.

Unwashed dishes are left in the unit for a long time.

· Cycle with one cup of white vinegar in a appliance safe glass or bowl placed on the upper rack. (Vinegar is an acid, and with constant use it could damage your appliance.)

· Select correct cycle based on soil Improper cycle selection. level and type of dishware being
washed.

Water temperature is too · Check water supply connection or

low.

water heater setting.

Dishwashing detergent was not used.

· Use recommended detergent.

Low inlet water pressure.

· Water pressure should be between 0.05 and 1.0 MPa.

Water jet holes on spray arms blocked.

· Clean the spray arms.

Improper loading of dishes.

· Make sure dishes do not block spray arm rotation or interfere with detergent dispenser.

Filters are clogged.

· Clean filters.

Too much Unremoved food debris on dishes.

· Large particles of food residues should be removed from the dishes before staring wash.

Problem Noise
Dishes don't dry.
Your home appliance and smartphone is not connected to the Wi-Fi network.

Possible Cause

Solutions

Some level of noise is normal during operation.

· Detergent cover opening. · Drain pump at the beginning of drain
cycle.

The appliance is not level. · Adjust leveling feet.

Nozzle arm knocking against dishes.

· Reposition the dishes.

Water pressure is too high.

· Adjust water pressure.

Rinse agent dispenser empty.

· Check and refill the rinse agent dispenser if empty. For better drying result, slightly open the door after operation.

· Change to a tablet that includes a

Tablets used may not

rinse agent (contact the tablet

have a built in rinse aid.

manufacturer if unsure). Alternatively,

This will reduce the drying you can use a liquid rinse agent in

performance.

the dispenser if the tablets don't

have a rinse agent built in.

A cycle without the Extra · Select a cycle that defaults to the Dry option was selected. Extra Dry option.

The password for the Wi-Fi that you are trying to connect to is incorrect.

· Find the Wi-Fi network connected to your smartphone and remove it, then register your appliance on LG ThinQ.

Mobile data for your smartphone is turned on.

· Turn off the Mobile data of your smartphone and register the appliance using the Wi-Fi network.

The wireless network name (SSID) is set incorrectly.

· The wireless network name (SSID) should be a combination of English letters and numbers. (Do not use special characters.)

The router frequency is not 2.4 GHz.

· Only a 2.4 GHz router frequency is supported. Set the wireless router to 2.4 GHz and connect the appliance to the wireless router. To check the router frequency, check with your Internet service provider or the router manufacturer.

The distance between the appliance and the router is too far.

· If the distance between the appliance and the router is too far, the signal may be weak and the connection may not be configured correctly. Move the location of the router so that it is closer to the appliance.

Error Codes
Problem

Possible Cause Water inlet problem.
Drainage Problem. Waste spigot is clogged. Filters are clogged.
Oversudsing caused by improper detergent, such as liquid dish soap.
Failure to level appliance.

Solutions
· Check for a clogged, kinked or frozen water supply hose.
· Check water supply.
· Check for a clogged, kinked or frozen drain hose.
· Remove knockout on waste spigot.
· Clean Filters.
· Do not use hand dishwashing liquids. Only use detergents which are designed for use in automatic dishwashers.
· To remove detergent residue in the tub, pour approximately 100~200 m of milk into a shallow bowl, place it to the upper rack and then run the appliance on the Auto cycle.
· Make sure that the appliance is properly leveled.

Excessive Water supplied.

Water leakage problem.

Heater circuit failure. Thermistor failure

· Call for service if the same problem occurs again.

Motor trouble

Vario motor trouble

Memo

References

Adobe InDesign 15.1 (Windows) GPL Ghostscript 10.02.1