Oladance Wearable Stereo B2

In the box

• Earbuds x 1
• Case x 1
• QSG (Quick Start Guide)
• USB Type-C cable x 1

Product Introduction

Charging LED indicator: Red light flashes continuously while charging and turns off when fully charged.

Bluetooth LED light: Indicates Bluetooth connection status.

Touch control area: Located on the earbuds for interaction.

Type-C port: For charging the case.

Get Started

Open the case lid. The earbuds are ready to pair when the lights on the earbuds start to blink slowly.

Controls

Music Control

• Tap once: Play / Pause
• Tap twice: Left earbud: Previous track; Right earbud: Next track
• Slide Forward: Volume up
• Slide Back: Volume down

Phone Calls

• Tap Once: Answer a call
• Tap Twice: End or decline a call

Voice Assistant

• Tap Three Times (x3): Activate voice assistant.

Bluetooth Connectivity

• Bluetooth Discovery Mode: Tap and hold both earbuds for 2 seconds to enter discovery mode.
• Clear Bluetooth pairing list: Tap and hold both earbuds for 5 seconds to clear the pairing list.

How to wear it?

1. Step 1: Pick up the earbud.
2. Step 2: Rotate along ear curve to position it correctly.
3. Step 3: Check fit for comfort and security.
4. Step 4: You are all set. The earbud should feel secure.

Basic Parameters

Operation temperature: 0~45°C | Input: 5.0V ⎓ 1A

Disposal and Recycling Information

The symbol (with or without a solid bar) on the device, batteries (included), and/or the packaging indicates that the device and its electrical accessories (e.g., headset, adapter, cable) and batteries should not be disposed of as household garbage.

Battery Warning

The built-in lithium battery is forbidden to be disassembled, impacted, extruded, or put into fire. The battery under very low air pressure may result in explosion or flammable liquid or gas leakage. Avoid the battery in high-temperature environments or exposure to strong sunlight to prevent explosion. Do not use the battery continuously in case of serious ballooning. The battery shall be handled according to local regulations and not disposed of as household garbage. Do not attempt to repair, remove, or refit the battery. Explosion may occur if the battery is replaced with an incorrect model. Do not compress or puncture the battery with hard objects. Battery leakage, overheating, or fire may occur if the battery is destroyed.

Declaration of Conformity

Shenzhen Dancing Tech Co., Ltd., declares that this device is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: https://www.oladance.com

SAR: RF exposure information: The EIRP power of the device at maximal case is below the exempt condition, 20mW specified in EN 62479: 2010. RF exposure assessment has been performed to prove that this unit will not generate harmful EM emission above the reference level as specified in EC Council Recommendation (1999/519/EC).

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

RF Exposure (FCC)

The portable device is designed to meet the requirements for exposure to radio waves established by the FCC RF exposure guidelines. These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value is measured at a distance of 0mm between the radiator and the Head. The highest reported Head SAR value: 0.66W/kg.

RF Exposure (ISED)

The portable device is designed to meet the requirements for exposure to radio waves established by ISED. These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value is measured at a distance of 0mm between the radiator and the Head. The highest reported Head SAR value: 0.66W/kg.

French: Le dispositif portable est conçu pour répondre aux exigences d'exposition aux ondes radio établies par l'ISED. Ces exigences fixent une limite DAS de 1,6 W/kg en moyenne sur un gramme de tissu. La valeur DAS la plus élevée est mesurée à une distance de 0mm entre le radiateur et la tête. Le DAS maximal déclaré est de 0,66 W/kg.

Product Identifiers

FCC ID: 2A9AR-OLA06L, 2A9AR-OLA06R

IC: 29727-OLA06L, 29727-OLA06R

HVIN: OLA06L, OLA06R

CMIIT ID: XXXXXXXX

Important Note: Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0cm between the radiator and your body.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Warning

• Don't place the product into a liquid environment or expose the product to high humidity.
• Avoid extrusion to prevent damage to the product.
• Do not attempt to dismantle the product. Store the product in a cool and dry place if stored for a long time.
• Avoid touching strong magnets to prevent the magnetic headset from being demagnetized.
• Avoid dusty, wet, and dirty environments where the electronic circuit of the equipment may be damaged.
• Do not use the equipment during thunderstorms, as they may cause equipment faults or shock hazards.
• Do not use the equipment when riding a motorcycle or bicycle, or driving a car, or crossing the road, to ensure your safety.
• Keep the equipment out of reach of children or pets to prevent damage.
• Do not wash the equipment with chemical cleansers or strong detergents.

Do not listen to audio at high sound pressure and high volume for a long time to prevent possible hearing impairment when the headset is used.

Industry Canada Compliance

English: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

French: Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

Oladance App

Download the Oladance APP to enjoy more customization and cool features. Let's have fun with your Oladance Wearable Stereo!

Available on the App Store and Google Play.