UPLIFT Standing Desk Assembly Instructions
This comprehensive guide provides step-by-step instructions for assembling your UPLIFT standing desk, ensuring a smooth and efficient setup process.
Getting Started
Estimated Assembly Time: ⏱️ 30 minutes
Recommended Assemblers: ? 2 people
Required Tools: Allen Keys (G, H, I) are included.
Parts List
| Part ID | Description | Quantity |
|---|---|---|
| 1 | Left Leg Assembly | x 1 |
| 2 | Right Leg Assembly | x 1 |
| 3 | Foot | x 2 |
| 4 | Crossbar Support (Left) | x 2 |
| 5 | Crossbar Support (Right) | x 1 |
| 6 | Support Bracket | x 1 |
| 7 | Support Bracket | x 1 |
| 8 | Center Support Bar | x 1 |
| 9 | Center Support Bar | x 1 |
| 10 | Connecting Plate | x 2 |
| 11 | Connecting Plate | x 1 |
Hardware List
| ID | Description | Quantity |
|---|---|---|
| A | Control Box | x 2 |
| B | M6 x 18 Screw | x 18 |
| C | M6 x 10 Screw | x 8 |
| D | M4 x 8 Screw | x 2 |
| E | M6 x 16 Screw | x 4 |
| F | Crank Mechanism | x 1 |
| G | Allen Key | x 1 |
| H | Allen Key | x 1 |
| I | Allen Key | x 1 |
Assembly Steps
Step 1: Assemble Center Support Structure
Attach one Crossbar Support (4) to the Center Support Bar (8) using two M6x10 screws (C) and Allen key (H). Repeat this process for the second Crossbar Support (4).
Diagram Description: Shows part 4 being secured to part 8 with screws C and tool H.
Step 2: Connect Second Center Support Bar
Attach the second Center Support Bar (9) to the Crossbar Supports (4) using two M6x10 screws (C) and Allen key (H).
Diagram Description: Shows part 9 being secured to part 4 with screws C and tool H.
Step 3: Attach Connecting Plates
Connect the Connecting Plates (10) to the ends of the Center Support Bars (8 and 9). Then, attach the Connecting Plate (11) to the other end of the Center Support Bars.
Diagram Description: Illustrates parts 10 and 11 being attached to the central support structure.
Step 4: Mount Leg Assemblies
Attach the Left Leg Assembly (1) to the frame by aligning it with the Connecting Plates (10, 11). Secure using M6x18 screws (B) and Allen key (I). Repeat for the Right Leg Assembly (2).
Diagram Description: Shows leg assemblies 1 and 2 being attached to the main frame using screws B and tool I.
Step 5: Install Feet
Attach the Feet (3) to the bottom of the Leg Assemblies (1 and 2). Use M6x18 screws (B) and Allen key (I) for secure attachment.
Diagram Description: Shows feet 3 being attached to the base of legs 1 and 2 with screws B and tool I.
Step 6: Attach Support Brackets
Mount the Support Brackets (6 and 7) onto the Leg Assemblies (1 and 2). Use M6x16 screws (E) and Allen key (H) for this step.
Diagram Description: Shows support brackets 6 and 7 being attached to legs 1 and 2 using screws E and tool H.
Step 7: Add Additional Crossbar Support
Attach the remaining Crossbar Support (5) to the desk frame. Secure it using M6x16 screws (E) and Allen key (H).
Diagram Description: Shows part 5 being attached to the frame with screws E and tool H.
Step 8: Install Crank Mechanism
Attach the Crank Mechanism (F) to its designated mounting point on the desk frame using the provided screws.
Diagram Description: Illustrates the crank mechanism F being attached to the frame.
Step 9: Secure Center Support
Ensure the Center Support Bar (8) is firmly attached to the leg assemblies. Use M4x8 screws (D) and Allen key (H) to secure it.
Diagram Description: Shows screws D and tool H being used to secure part 8.
Step 10: Mount Control Box
Mount the Control Box (A) onto the desk frame. Use screws (G) and Allen key (H) for installation.
Diagram Description: Shows the control box A being attached using screws G and tool H.
Step 11: Final Checks and Adjustments
Your UPLIFT standing desk is now assembled. Verify that all screws are tightened and all components are securely attached. The crank mechanism allows for height adjustment.
Diagram Description: Depicts the fully assembled desk, highlighting the crank mechanism and indicating adjustment capabilities with directional arrows.
Step 12: Desk Operation
Use the crank mechanism to smoothly raise or lower the desk to your preferred working height. Enjoy your new ergonomic workspace.
Diagram Description: Shows the desk in use, with clear up/down arrows illustrating the height adjustment function.