NESCO Classic Vacuum Sealer - Model VS-C1

Table of Contents

• Important Safeguards
• Features
• Functions
• Operating Instructions
• Cleaning and Maintenance, Sealing Tips
• Troubleshooting
• One Year Limited Warranty

Important Safeguards

This product is designed for household use only. When using electrical appliances, basic safety precautions should always be followed:

1. Read all instructions before using this appliance.
2. The appliance is designed for household use only. It is not intended for commercial use.
3. To protect against electric shock, do not immerse the appliance, including cord and plug, in water or other liquid.
4. Close supervision is necessary when appliance is used near children. This appliance is not recommended for use by children.
5. Unplug appliance from power outlet when not in use, before assembly or disassembly of parts, and before cleaning.
6. Do not operate any appliance with damaged cord or plug or after appliance malfunctions, or has been damaged in any manner. Call NESCO® Customer Service for examination, repair or adjustment.
7. Do not place appliance on or near a hot gas or electric burner, or heated oven.
8. Only use accessory attachments recommended by the manufacturer.
9. Do not use appliance outdoors or for other than intended use.
10. Do not let the cord hang over the edge of a table or touch hot surfaces.
11. WARNING: Appliance is not designed for continuous use. Approved for one operating cycle every two minutes.
12. Operate appliance only when all parts are fully engaged and tightened.
13. To reduce risk of injury and damage to appliance keep hands, hair, clothing and utensils away from parts during operation.
14. Place appliance on flat and steady support surface when ready for use.

SAVE THESE INSTRUCTIONS

Polarized Plug: This appliance has a polarized plug (one blade is wider than the other). To reduce risk of electric shock, plug is intended to fit into polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not try to modify the plug in any way.

Short Cord Instructions: A short power supply cord is provided to reduce the risk resulting from becoming entangled in or tripping over a longer cord. Extension cords may be used if care is exercised in their use. If an extension cord is used, the marked electrical rating of the cord should be at least as great as the electrical rating of the appliance. The longer cord should be arranged so that it will not drape over the tabletop where it can be pulled on by children or tripped over unintentionally.

Features

The NESCO Classic Vacuum Sealer Model VS-C1 features the following:

• 1. Pulse Vacuum: Allows for manual vacuum control.
• 2. Manual Seal: Seals bags without vacuum or stops vacuum process to control pressure.
• 3. Vac&Seal / Cancel: Initiates automatic vacuum and sealing process or cancels operation.
• 4. Cover Unlock Buttons: Located on the right and left sides to open the cover.
• 5. Sealing Gasket: Ensures a vacuum seal is maintained.
• 6. Vacuum Chamber: Collects air and excess liquid.
• 7. Sealing Bar: Holds the bag for sealing.
• 8. Sealing Element: Non-stick heating element for sealing bags.
• 9. Power Indicator Lights: Show the status of button functions.

Note: DO NOT remove the protective coating on the sealing element.

Functions

1. Pulse Vacuum: Press and release to vacuum manually. Repeat until desired vacuum is reached, then press 'manual seal' to complete the seal.
2. Manual Seal: Seals the open end of a bag without vacuum. When 'Vac&Seal' is active, pressing this button stops vacuuming and starts sealing to control pressure and prevent crushing delicate items.
3. Vac&Seal / Cancel: Starts the automatic vacuuming and sealing process, or cancels the operation at any time.
4. Cover Unlock Buttons: Press both buttons on the sides to unlock the cover.
5. Sealing Gasket: Guarantees vacuum maintenance in the chamber. Ensure the lid is not locked when not in use to prevent gasket deformation.
6. Vacuum Chamber: Position the open end of the bag here. It draws air and collects excess liquid.
7. Sealing Bar: Place the bag to be sealed over this bar.
8. Sealing Element: A non-stick heating element that seals the bag and prevents it from sticking to the bar.
9. Power Indicator Lights: Indicate the status of the vacuum sealer's button functions.

Operating Instructions

Making a Bag with the Roll:

1. Pull bag material from the roll to the desired length and cut with scissors. Allow extra length for sealing (approx. 3 inches plus 1 inch for each reseal).
2. Open the front cover and place one open end of the bag material on the sealing element.
3. Close the cover and press down firmly to lock. Ensure both sides lock.
4. Press the “Seal” button to start sealing.
5. When the sealer stops, the bag is sealed. Press both cover unlock buttons to open and remove the bag.

Vacuum Packaging Your Filled Bag:

1. Place items inside the bag.
2. Open the cover, clean and straighten the open end of the bag, ensuring no wrinkles or ripples.
3. Place the open end of the bag in the vacuum chamber beneath the air intake.
4. Close the cover and press down firmly to lock. Ensure both sides lock. Press the “Vacuum&Seal” Button. The bag will be automatically vacuumed and sealed.
5. When the sealer stops, the process is complete. Press both cover unlock buttons to open and remove the bag.
6. Refrigerate or freeze contents if needed.

NOTE: For best sealing, let the appliance cool for 2 minutes before reuse. Wipe out any excess liquid or food residue from the vacuum chamber after each use.

Cleaning and Maintenance

Vacuum Sealer:

1. Unplug the unit before cleaning.
2. Clean the vacuum sealer with a damp sponge. Do not immerse in water.
3. Use a mild dish soap. Do not use abrasive cleaners as they will scratch the surface.
4. Dry thoroughly before using. When storing, do not lock the cover to prevent gasket deformation.

Bags:

1. Bag material can be washed in warm water with dish soap. Rinse well and dry thoroughly before reusing.
2. Bags can be washed on the top rack of a dishwasher by turning them inside out. Stand the bag up so water can penetrate. Dry thoroughly before reusing. Note: Bags used for greasy foods should not be reused.

Storing Your Vacuum Sealer:

1. Keep the unit in a flat, safe place out of reach of children.
2. Ensure the cover is not locked when not in use and during storage to prevent gasket deformation.

Vacuum Sealing Tips:

• Do not overfill bags; leave enough space at the open end for placement in the vacuum chamber.
• Do not wet the open end of the bag, as damp bags may be difficult to seal.
• Clean and straighten the open end of the bag before sealing. Ensure no foreign objects, wrinkles, or creases are present on the open area, as these can cause sealing difficulties.
• Avoid vacuum packaging items with sharp points (e.g., fish bones, hard shells) as they can puncture the bag. Use a container instead.
• Allow the vacuum sealer to rest for 2 minutes after each sealing or vacuum sealing cycle.
• To prevent liquids, crumbs, or food particles from entering the vacuum chamber and potentially damaging the appliance, freeze moist and juicy foods first, or place a folded paper towel inside the bag near the top. For powdery or fine-grained foods, do not overfill the bag. You can also place a coffee filter inside the bag before vacuum sealing.
• Pre-freeze fruits and blanch vegetables before vacuum packing for best results.
• Liquids need to be cooled before vacuum packing. Hot liquids can bubble up and overflow. A jar attachment is required for sealing jars.
• Store perishable foods in the freezer or refrigerator. Vacuum packing extends shelf life but does not preserve food indefinitely.
• Pantry items like flour, rice, cake mixes, and pancake mixes stay fresher longer when vacuum packed. Nuts and condiments retain their flavor and prevent rancidity.
• Keep camping supplies (matches, first aid kits, clothing) clean and dry. Keep flares for emergencies ready. Keep silver and collectibles untarnished.
• Fill a bag about 2/3 full with water, seal the end (do not vacuum), and freeze it. Use as an ice pack for coolers or sports injuries.

Troubleshooting

Vacuum Sealer Has No Power:

• Check if the vacuum sealer is plugged in. Test the electrical outlet with another appliance.
• The vacuum sealer will shut off automatically if overheated. Allow it to cool down for 15 minutes and try again.
• Check the power cord and plug for damage. If damaged, do not use the vacuum sealer.

Vacuum Sealer Does Not Perform First Seal on the Bag:

• Ensure the bag cut from the roll is properly positioned as described on page 4 of the operating instructions.

Vacuum Sealer Does Not Pull a Complete Vacuum in Bags:

• For proper sealing, the open end of the bag should rest entirely within the vacuum chamber area.
• Check the seal bar and gaskets for debris and proper position. Wipe clean and smooth them into place.
• The vacuum sealer bag may have a leak. To test, seal the bag with some air, submerge it in water, and apply pressure. Bubbles indicate a leak. Reseal or use another bag.

Vacuum Sealer Not Sealing Bag Properly:

• If the sealing bar overheats and melts the bag, you may need to lift the cover and allow the seal bar to cool for a few minutes.

Vacuum Sealer Loses Vacuum After Being Sealed:

• Leaks along the seal can be caused by wrinkles, crumbs, grease, or liquids. Reopen the bag, wipe the inside top of the bag, and smooth it along the sealing strip before resealing.
• Check the bag for a puncture or hole that may have released the vacuum. Cushion sharp edges in the bag's contents with paper towels.

One Year Limited Warranty

The Metal Ware Corporation warrants the original purchaser that this product will be free from defects in material and workmanship for a period of one year from the date of purchase. The product must be used for personal or sole household usage in accordance with the instructions. Should your product prove defective within one year from the date of purchase, contact customer service at 1-800-288-4545 with an explanation of the claim. If a viable warranty claim is determined, a customer service member will provide the necessary details to have your unit repaired or replaced. Under this limited warranty, Metal Ware Corp will repair or replace any parts found to be defective, at its sole discretion. This limited warranty is void if the unit is connected to an unsuitable electrical supply, dismantled, interfered with in any way, or damaged through misuse. This warranty is not transferable.

LIMITATION OF REMEDIES AND DAMAGES: Except for the limited warranty and remedies expressly stated above, The Metal Ware Corp shall not be liable to you, or to anyone claiming by or through you, for any obligations or liabilities, including, but not limited to, obligations or liabilities arising out of breach of contract, breach of warranty, statutory claims, negligence or other tort or any theory of strict liability, with respect to the product or The Metal Ware Corp's acts or omissions or otherwise. Buyer agrees that in no event shall The Metal Ware Corp be liable for incidental, compensatory, punitive, consequential, indirect, special or other damages. Warranty does not cover consequential or incidental damages such as property damage and does not cover incidental costs and expenses resulting from any breach of this warranty, even if foreseeable. Some states or provinces do not allow the exclusion or limitations of incidental or consequential damages, so the above limitation or exclusion may not apply to you depending on the State or Province of purchase.

Please fill in the details on your warranty card and return it within one week from the date of purchase.

Send warranty card to:
VS-C1/NESCO Vacuum Sealer
C/O MW
PO Box 237
Two Rivers, WI 54241-0237
USA