Your Name as Your Email | Hover Realnames
LED Lighting Systems, Linear LED Lights, LED transformers | Q-Tran
Instruction Manual for Q-TRAN models including: QTM-eLED-60 LED Power Supply, QTM-eLED-60, LED Power Supply, Power Supply, Supply
QTM-eLED 0-10V | DC Power Supplies | Q-Tran
File Info : application/pdf, 3 Pages, 510.56KB
DocumentDocumentINSTALLATION LED POWER SUPPLY - QTM-eLED+0-10V Housing 14.5" 8.00" ISOMETRIC VIEW 4.00" Mounting Options 4.00" 8.00" BOTTOM VIEW 0.875" KNOCKOUT 9X (FOR 1/2" FITTINGS) 1/4" Rod Thru Hole 3/8" Rod Thru Hole Double Sided Key Hole NOTE: Bracket can also be mounted (Top & Bottom) for Vertical Mounts. RECESSED SURFACE HORIZONTAL SURFACE SPACING 9.5" O.C. VERTICAL 19" O.C. More Units can be stacked More Units can be stacked 9.5" O.C. RECESSED MOUNT R(HODorSizUoSnPtaEl)NSION R(OVeDrtSicUaSl)PENSION SURFACE STACKING ROD SUSPENSION Vertical 9.5" O.C. 16" O.C. More Units can be stacked Plenum Door Required Horizontal NOTE: Rods not included. © 2023 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | sales@q-tran.com | www.q-tran.com Specification subject to change. Rev-10-02-23 INSTALLATION LED POWER SUPPLY - QTM-eLED+0-10V Driver with Dimming Module QTM-eLED+0-10V : for interior LED DRIVER (120V - 277V) LED DRIVER (120V - 277V) LED DRIVER (120V - 277V) 0-10V DIMMER 0-10V DIMMER 0-10V DIMMER + - + - + - OUTPUT LOAD + - DIMMER CONTROL SECONDARY PRIMARY _ Negative + Positive +24V +24V +24V 0-10V DIMMING* *Customer provided © 2023 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | sales@q-tran.com | www.q-tran.com NEU HOT GND GND HOT NEU Specification subject to change. Rev-10-02-23 INSTALLATION LED POWER SUPPLY - QTM-eLED+0-10V CSA Requirements · Suitable for Indoor use · This power supply must be installed according to the National Electric Code and local codes and ordinances and in accordance with applicable installation code by a person familiar with the construction and operation of the product and the hazards involved. · Wear rubber shoes and work on a sturdy wooden or fiberglass ladder. · This power supply is to be installed in a location where it is not likely to be contacted by non-electricians. · To avoid a hazard to children, account for all parts and destroy all packaging materials. QTM-eLED INPUT VOLTAGE OUTPUT VOLTAGE CONTROL TYPE 120V - 277V 12V 24V 0-10V Model QTM-eLED-60 QTM-eLED-120 QTM-eLED-180 QTM-eLED-100 QTM-eLED-200 QTM-eLED-300 Input Voltage (V) 120 / 277 120 / 277 120 / 277 120 / 277 120 / 277 120 / 277 Input Current (A) 0.60 / 0.29 1.20 / 0.58 1.80 / 0.87 0.95 / 0.40 1.90 / 0.80 2.85 / 1.20 Frequency Nominal Output Nominal Output Voltage (VDC) Wattage (W) 50/60 12 60 50/60 12 120 50/60 12 180 50/60 24 100 50/60 24 200 50/60 24 300 DMX WD TW Type Ic Recessed, Inherently Protected Type IC ENCASTRE, PROTECTION INHÉRENTE For Supply Connections Use Wire Rated For At Least 60 C. Not for use with dimmers NE CONVIENT PAS A DES GRADATEURS Suitable For Damp Locations CONVIENT AUX EMPLACEMENTS HUMIDES 50/60 Cycle Class 1 or Class 2 This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved. CE PRODUIT DOIT ÊTRE INSTALLÉ SELON LE CODE D'INSTALLATION PERTINENT, PAR UNE PERSONNE QUI CONNAÎT BIEN LE PRODUIT ET SON FONCTIONNEMENT AINSI QUE LES RISQUES INHÉRENTS. LOW VOLTAGE LIGHTING SYSTEM Q-Tran, Inc. CLASS: 3425 - 15 3425 - 95 Q-TRAN, INC. MILFORD, CT U.S.A. (203) 367-8777 WWW.Q-TRAN.COM © 2023 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | sales@q-tran.com | www.q-tran.com Specification subject to change. Rev-10-02-23