Installation Guide for Mi Light models including: SYS-PT1, LED Control Box IP66 Waterproof Smart Lighting LED Light Control Box
1. Features. This control box adopt the widely used 2.4GHz wireless technology with the features of low power consumption, long signal transmitting and strong anti-interference, etc. 2.4GHz RF remote...
1. Features This control box adopt the widely used 2.4GHz wireless technology with the features of low power consumption, long signal transmitting and strong anti-interference, etc. 2.4GHz RF remote controller, DMX512 controller ( Need DMX 512
1-Channel Host Control Box Model No.: SYS-PT1 1. Features This control box adopt the widely used 2.4GHz wireless technology with the features of low power consumption, long signal transmitting and strong anti-interference, etc. 2.4GHz RF remote controller, DMX512 controller ( Need DMX 512 LED transmitter. Model No. FUTD01 ). Also with smart phone APP control (need WiFi ibox or WiFi remote). The controller has auto-transmitting and auto-synchronizing function. Only compatible with Mi-Light SYS series products, including wall washer light, underwater light and Garden Light,etc. 2. Parameters Model No.: SYS-PT1 Input: AC 100~240V 50/60Hz Output Voltage: DC24V Output Current: Max 8.5A Output Power: Max 200W Controlling Distance: 30m IP Rate: IP66 Product Weight: 2.55kg 263mm INPUT AC100~240V Indicator Light Protective Vents Receiving Antenna OUTPUT DC24V 8.5A 81mm 184mm 3. Auto-transmitting function One strip controller can transmit the signals from the remote control to another controller within 30m, as long as there is a strip controller within 30m, the remote control distance can be limitless. Auto-transmitting Control Box Distance 30m Control Box Distance 30m Control Box 4. Auto-synchronization Different controllers can work synchronously when they are started at different times, controlled by the same remote, under same dynamic mode and with same speed, and within 30m distance. Control Box Control Box Remote Control Box Control Box 5. Installation Instruction 1-Channel Host Control Box 1 Twist off the screws on the 4 corners; take apart the case cover. 2 Fix the product in the specified position with the screws in the fitting 3 Lid the case cover and lock the screws on the 4 corners V+ DATA L N Output DC24V Connect Mi-Light SYS series lighting INPUT AC100~240V Made in China Output: DC24V Max 8.5A(Max 200W) Brown: V+ Blue: V- Yellow-green: DATA Model No.: SYS-PT1 Input: AC100~240V 50/60Hz Brown: L Blue: N Yellow-green: OUTPUT Receiving DC24V 8.5A Antenna Protective Vents Indicator INPUT Light AC100~240V NoteWhen using "SYS-PT1 control box", you need to add "SYS-PT2 1-channel amplifier box" for below 3 situations. 1. Connecting over 50pcs lights. 2. Connected cable length over 300m. 3. Output power over 200W. 1. All connected lights to "SYS-PT1 Controller box" cannot be over 200W, otherwise, it will damage the controller box. 2. The wiring method, please see details for the SYS series instructions. 6. Link/Unlink Compatible with these remote controls (Purchased separately) Controller can be working after linking with remote; for more details, pls read the remote instruction. B4 / T4 B0 B8 FUT092 FUT088 FUT089 7. Attention 1. Please check whether the input voltage is in accordance with the control box working voltage, and please check the connection of both the cathode and anode. 2. Non-professional user cannot dismantle the control box directly, Otherwise the control box may be broken. 3. Please do not use controller around the mental area and high magnetic field, otherwise, it will badly affect the control distance. Made in ChinaAdobe PDF library 15.00 Adobe Illustrator CC 23.0 (Windows)