Part 15C Test Setup Photographs
Report Number: 1412FR19
Conducted Emissions Test Configuration
Front View
The image shows a test table with electronic equipment, including a device under test (DUT) and associated test equipment, connected by cables. A metal rack filled with electronic devices is visible in the background.
Rear View
This image displays a similar test setup from the rear. Equipment is arranged on a table, with cables connecting various components. A background rack of electronic equipment is also visible.
Radiated Emissions Test Configuration
Below 1GHz _ Front View
The photograph captures a test environment, likely an anechoic chamber, with a yellow floor marked with red lines. A test antenna is positioned above a table holding electronic equipment. The equipment is placed on a rotating turntable.
Below 1GHz _ Rear View
This image shows the same anechoic chamber setup from the rear. The electronic equipment, situated on a turntable, is viewed from behind, with cables connecting the components.
Above 1GHz _ Front View
This photograph depicts an anechoic chamber test setup. A test antenna is positioned above a table with electronic equipment on a turntable. The equipment is viewed from the front.
Above 1GHz _ Rear View
This image shows the anechoic chamber test setup from the rear. Electronic equipment is placed on a turntable, with cables connecting various components, and viewed from behind.
