User Manual for LG Electronics models including: 48GQ900, 48GQ900 Ultra Gear OLED Monitor, Ultra Gear OLED Monitor, Gear OLED Monitor, OLED Monitor, Monitor
Геймърски монитор LG Ultra Gear 48GQ900-B, 47.5", OLED (3840 x 2160), 0.1 ms, HDR 10, G-SYNC, Free Sync, Черен • 12709701 ⋙ Цена | Plasico IT Superstore
Dismantling information The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of LG products to remove components and materials requiring selective treatment. Product Identification Type of Product Monitor Model name 48GQ900 Displays must be stored in accordance with the requirements stipulated in Appendix VIII (1) or (2) of Directive 2012/19/EU and must, amongst other things, be stored in a weatherproof manner. Containers with covers must be used when storing and transporting the Displays. Contents 1. Materials and components for Selective Treatment 2. Tools Required 3. Product Disassembly Process 4. Disassembly of External enclosure 1. Materials and components for Selective Treatment Displays may contain hazardous substances like Pb and BFRs which are covered by exemptions under the RoHS directive. However, the majority is present in the PCB assembly. In order to reduce emissions as much as possible, a complete disposal of the old appliance is required. This treatment may only be performed in authorized handling plants. Materials and components Notes Printed Circuit Boards (PCB) or Printed Circuit Assemblies (PCA) Batteries Mercury containing components Liquid Crystal Displays (LCD) with a surface greater than 100 square cm Capacitors / condensers (Containing PCB / PCT) Electrolytic Capacitors / Condensers measuring greater than 2.5 cm in diameter or height External electric cables cords Gas Discharge Lamps Plastics containing Brominated Flame Retardants Components and waste containing asbestos Components, parts and materials containing refractory ceramic fibers Components, parts and materials containing radioactive substances With a surface greater than 10 square cm For Remote control Internal batteries display backlights Includes background illuminated displays with gas discharge lamps Power cord Signal cable Quantity of items included in product O - O - O O O - 2. Tools Required List the type that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed. Tool Description Tool information Screw driver Nipper Plastic Hera Jig 3. Product Disassembly Process 1. Batteries Batteries can easily be removed from the remote control once the back cover of the remote control has been removed. Batteries can easily be removed from the PCB Assembly once the back cover of product has been removed. None . 3. Product Disassembly Process 2. PCBs and LCD Module The back cover of the display can easily be removed by hand and screw driver. Once removed this will expose the accessible electronic units (PCBs), which can now be easily removed with hand and screw driver. LED module(together with their casing) is only left after all other parts like electronic units and casing have been removed. 3. Product Disassembly Process 4. Power cord and signal cables A Power cord plugged into the back of the display can easily be removed by hand or cables are provided as de-attached from the product 5. Capacitors > 25 mm Capacitors > 25 mm are located in the power supply units and can be removed by nipper 18* 50m m 4. Disassembly of External enclosure Stand base can be disassembly by Remove the screws(3ea) Back Door and cable cover can be disassembly by pushing the latch in the direction of the arrow Stand body can be disassembly by Remove the screws(4ea) Remove the screws(6ea) with a screw driver Disassemble the back cover by hand in the direction of the arrow 4. Disassembly of External enclosure Disassemble the back cover Re-overturn the set and disaaemble screw and disassemble the PCB and cable LED ModuleMicrosoft PowerPoint 2013 Microsoft PowerPoint 2013