Lunderg
Lunderg Under Mattress Bed Alarm Full Video Guide
User Guide for LUNDERG models including: Under Mattress Bed Alarm Pad, Mattress Bed Alarm Pad, Bed Alarm Pad, Alarm Pad, Pad
Lunderg Under Mattress Bed Alarm Pad - Pager NOT Included - Wireless Under Mattress Sensor Pad - Replacement or Extra Pad : Health & Household
Under mattress Replacement Pad QUICK Guide 2023 09 06
File Info : application/pdf, 8 Pages, 4.76MB
DocumentDocumentQUICK SETUP GUIDE Under Mattress Bed Alarm Replacement Pad If you have any issue or question, contact us directly at questions@lunderg.com STEP 1 TURN ON THE MONITOR ON Install batteries following +/- Close cover with screwdriver Turn ON STEP 2 PAIRING Hold "PAIR" button for 2-6 sec until status light turns STEADY GREEN Locate pocket on the bed pad & open it Set to Early-Alert (right) and close pocket. Pad will start beeping! COMPLETE WITHIN 40 SECONDS! STEP 3 PAD PLACEMENT AT HIP HEIGHT WAIT! DO NOT SIT / PRESS ON BED Place bed pad under mattress (Early-Alert side to the edge) Place mattress down & wait until pad stops beeping (10 sec to 2 min depending on mattress) If pad was not placed before it stopped beeping, turn OFF bed pad, then ON (right) and repeat this step. STEP 4 TESTING Lay down on the bed Sit on the edge of the bed and then exit bed ! If Alarm didn't sound, switch OFF bed pad first, then go back to step 1, and PAIR the device. ALARM MUST SOUND Cancel alarm by FIRMLY pressing "STOP" button READY THE SYSTEM IS READY TO USE This is just a quick guide to get you started. To unlock the full potential of your system, please read the user manual and check the full instructional video! Full Guide Video www.Lunderg.com/underfullvideo SUPPORT QUESTIONS? Contact us at questions@lunderg.com We will reply you within 24 hours, 7 days a week! Lunderg.com