Masport Edger 550913

Outdoor Power Equipment

Part Number: 550913

Year of First Manufacture: Sept 2012

Serial Number: 7675547

Issue E.0, Jan 2014 PB, REF # 750913S

Exploded Diagrams and Parts List

This document provides a detailed breakdown of the Masport Edger model 550913. It includes exploded view diagrams and a comprehensive list of parts with their corresponding numbers, descriptions, and quantities.

Page 2: Cutter Head Assembly

This section details the components of the cutter head assembly, including the baseplate, screws, washers, nuts, pulleys, and the cutter blade.

Page 3: Cutter Head and Guard Assembly

Further details on the cutter head assembly, including the cutter shaft, blade, and the guard components such as the flap deflector and clamp.

Page 4: Handle and Chassis Assembly

This page illustrates the main frame and handle components, including the upper and lower handles, bail arm, height control levers, and the chassis.

Page 5: Control and Wheel Assembly

Details on the control mechanisms, such as throttle controls and cables, as well as the front and rear wheel assemblies, bearings, and spacers.

Page 6: Assembly Details

This page provides a closer look at specific assembly points, including the engine mounting and various linkage and bracket components.

Important Notes:

Spare Parts Note: Masport 550913 Edgers with serial numbers less than 7692693 may require different pulleys (536011 and 550447) which have been replaced by 550449 and 550448 respectively. The belt (550452) fits both configurations.
Engine Wiring: Information is provided regarding engine wiring (550439, 550467, 550468) and their routing within the handles and connection to the engine.
Loctite: Item 9 (Stud-M8 x NF 5/16 x 36 HT8.8) should be installed with Loctite into the engine.
Belts and Pulleys: Pulleys 550449 and 550448 require a toothed belt (550452).