Kingston NV3 PCIe 4.0 NVMe SSD
For high-speed, low-power storage needs
Kingston's NV3 PCIe 4.0 NVMe SSDs are next-generation storage solutions powered by a Gen 4x4 NVMe controller, delivering read/write speeds of up to 6,000/5,000MB/s1. They are available in compact, single-sided M.2 2280 (22x80mm) and 2230 (22x30mm) form factors, designed to expand storage in small-form-factor systems like laptops and handheld gaming consoles2. These SSDs offer lower power consumption and reduced heat, optimizing system performance without compromising value. Capacities range from 500GB–4TB3, providing ample space for applications, documents, photos, videos, and games.
- Gen 4x4 NVMe PCIe performance
- High-speed, low-power storage needs
- Capacities of up to 4TB3
Specifications M.2 2280
Form factor | M.2 2280 |
Interface | PCIe 4.0 x4 NVMe |
Capacities3 | 500GB, 1TB, 2TB, 4TB |
Sequential read/write1 | 500GB - 5,000/3,000MB/s 1TB - 6,000/4,000MB/s 2TB - 4TB - 6,000/5,000MB/s |
NAND | 3D |
Endurance (total bytes written)4 | 500GB-160TB 1TB-320TB 2TB-640TB 4TB-1280TB |
Storage temperature | -40°C~85°C |
Operating temperature | 0°C~70°C |
Dimensions | 22mm x 80mm x 2.3mm |
Weight | 7g (all capacities) |
Vibration non-operating | 20G (10-1,000Hz) |
MTBF | 2,000,000 hours |
Warranty/Support5 | Limited 5-year warranty with free technical support |
Specifications M.2 2230
Form factor | M.2 2230 |
Interface | PCIe 4.0 x4 NVMe |
Capacities3 | 500GB, 1TB, 2TB |
Sequential read/write1 | 500GB - 5,000/3,000MB/s 1TB - 6,000/4,000MB/s 2TB - 6,000/5,000MB/s |
NAND | 3D |
Endurance (total bytes written)4 | 500GB-160TB 1TB-320TB 2TB-640TB |
Storage temperature | -40°C~85°C |
Operating temperature | 0°C~70°C |
Dimensions | 22mm x 30mm x 2.3mm |
Weight | 500GB - 2.6g 1TB - 2TB - 2.8g |
Vibration non-operating | 20G (10-1,000Hz) |
MTBF | 2,000,000 hours |
Warranty/Support5 | Limited 5-year warranty with free technical support |
Part Numbers M.2 2280
- SNV3S/500G
- SNV3S/1000G
- SNV3S/2000G
- SNV3S/4000G
Part Numbers M.2 2230
- SNV3SM3/500G
- SNV3SM3/1T0
- SNV3SM3/2T0
The SSD is designed for use in desktop and notebook computer workloads and is not intended for Server environments.
- Based on "out-of-box performance" using a PCIe 4.0 motherboard. Speed may vary due to host hardware, software and usage.
- Consult your device manufacturer prior to installing an SSD.
- Some of the listed capacity on a Flash storage device is used for formatting and other functions and thus is not available for data storage. As such, the actual available capacity for data storage is less than what is listed on the products. For more information, go to Kingston's Flash Memory Guide.
- Total Bytes Written (TBW) is derived from the JEDEC Client Workload (JESD219A).
- Limited warranty based on 5 years or "Percentage Used" which can be found using the Kingston SSD Manager (kingston.com/ssdmanager). For NVMe SSDs, a new unused product will show a Percentage Used value of 0, whereas a product that reaches its warranty limit will show a Percentage Used value of greater than or equal to one hundred (100). See kingston.com/wa for details.
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE.
©2025 Kingston Technology Europe Co LLP and Kingston Digital Europe Co LLP, Kingston Court, Brooklands Close, Sunbury-on-Thames, Middlesex, TW16 7EP, England. Tel: +44 (0) 1932 738888 Fax: +44 (0) 1932 785469 All rights reserved. All trademarks and registered trademarks are the property of their respective owners.
MKD-06162025