CW Watch S1 User Manual

This document provides instructions and specifications for the CW Watch S1.

Regulatory Information

ISED Compliance: This device complies with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to two conditions: 1. The device may not cause interference. 2. The device must accept any interference, including interference that may cause undesired operation.

FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device. If interference occurs, try reorienting the antenna, increasing separation, connecting to a different outlet, or consulting a dealer/technician.

Getting Started

Steps for Use: The setup process takes approximately 5 to 10 minutes. Follow these steps: 1. Wear → 2. Power On → 3. Set up → 4. Start Using.

1. Wear Your Watch

For optimal data accuracy:

Wear the watch approximately two finger-widths from your wrist bone.
Adjust the band so a finger's width fits between the band and your wrist for comfort and proper contact.

2. Power On

Press the Digital Crown until the startup screen appears. If the watch does not power on, it may be due to battery drain. Charge for approximately 10 minutes and wait for it to power on automatically.

3. Set up the Watch

Step 1: Download the Fitbeing app

Go to your phone's app store (Google Play for Android, App Store for iPhone).
Search for "Fitbeing" and install it.
Alternatively, scan the provided QR code to quickly access the app store.

Step 2: Pair with the App

Open the Fitbeing app and select "Set Up a Device" on the home page.
Follow the instructions to pair your "CW Watch S1" via Bluetooth.
Attentions: Do not pair directly within your phone's Bluetooth settings. Grant Fitbeing app permissions for Bluetooth, Location, and Camera for successful pairing.

4. Start Using

You can now use the watch.

Product Overview

Your CW Watch S1 includes:

Front
Back
Band
Screen
Digital Crown
Magnetic Charging Contacts
Heart Rate and Blood Oxygen Sensors
Magnetic Charging Cable

Key Specifications

Product Name

CW Watch S1

Display

1.78 inch AMOLED

Resolution

368 × 448

Battery Capacity

350 mAh

Wireless Connection

Bluetooth 5.3

Water resistance grade

IP68

Body Dimension

45.9mm × 38.5mm × 12.4mm

Satellite positioning

GPS L1＋BDS

Working Temperature

0°C ~ 50°C

Compatible Operating Systems

iOS 12.0 and above, Android 7.0 and above

Wear and Care

Design for Comfortable Wearing

The inner sweat grooves of the band are designed to minimize skin irritation from sweat, moisture, and prolonged wear.

It is advised to remove the watch for approximately one hour daily. If you experience discomfort or irritation (redness, tingling, burning sensation), take off the watch and rest your wrist.
For hygiene, regularly clean your watch and wrist, especially after workouts. Avoid harsh soaps or cleaning wipes; use mild soap and fresh water to clean the band.

Change the Band

Install band:

Insert the metal pin at position "A" into the hole.
Push and hold the spring bar.
Press the band into the body and release the spring bar.
Pull the watch band to confirm firm installation.

Remove band:

Lift the spring bar from the groove.
Push and hold the spring bar.
Gently pull to remove the band.

Charge the Watch

Connect the charging cable to a USB power source (5V⎓1A or above) and attach the other end to the charging contacts on the back of the watch. Ensure the USB plug is on the same side as the crown and that the charging contacts are clean.

Common Functions

Change the Watch Face

Press and hold the screen for 1 second to access the watch face gallery and select a new watch face.

Tiles

Swipe left or right on the watch face screen to quickly switch between Activity, Heart Rate, Sleep, Recently, Weather, or Workout tiles.

Control Center

Swipe up on the watch face screen to access the Control Center for features like Silent Mode, Sleep Mode, Always-on Display, and brightness/volume adjustments.

Notification Center

Swipe down on the watch face screen to access the Notification Center.

Health Metrics Measurement

The watch automatically measures health data like heart rate, sleep, stress, and activity. View and track this data in the Fitbeing app.

Record Workouts

For outdoor workouts, wait in an open area for GPS to connect (blinking icon stops blinking upon success). Access the Workout app and select a specific workout to start recording.

Digital Crown Operation

Rotate: Navigate screens/menus, adjust volume.
Press: Wake screen, enter app center, exit app.
Long press (8s): Force restart the watch.

Touchscreen Operation

Supports full-screen touch (swipe, tap, touch and hold).

Precautions

Do not replace the built-in battery yourself.

Avoid forcibly opening the watch case to prevent short circuits and overheating.

Keep the watch away from environments exceeding 60℃ to prevent battery leakage or explosion.

While the product complies with IP68 waterproof standards, it is not recommended for activities involving high temperatures, steam, or rapid water flow (e.g., bathing, diving, water skiing). Waterproof performance may be compromised if the product structure is damaged.

Firmware upgrades may change the interface and usage. Refer to product upgrade instructions for details.