Introduction & Contact
We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact us: CustomerService@vevor.com
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
Contents
- SAFETY PRECAUTIONS
- PRODUCT DESCRIPTION
- INSTALLATION
- DIMENSION AND SPECIFICATION
- POWERING AND SETUP
- CLEANING
- PROGRAMMING
- FAQ
- ATTENTIONS
SAFETY PRECAUTIONS
WARNING
- Improper operation may cause personal injury.
- Improper operation may cause damage to the machine.
- Improper operation may cause damage to other objects.
- The symbol [⚠] indicates that the user should pay high attention to the situation to be noted. The left figure shows "Be careful of electric shock" [⚡].
- [⌀] Disconnect the fan when moving from one location to another.
- [⌀] Do not use a power supply that does not meet the rated voltage. The use of non-compliant power supplies can cause fire or electric shock.
- [⌀] If the machine emits smoke, odor, motor noise, or other abnormal conditions, please do not use it. It may cause fire or electric shock.
- [⌀] Do not disassemble, repair, or rectify the machine during use. Doing so may result in fire or electric shock and personal injury.
BE CAREFUL
- [⌀] DO NOT use the fan in a window. Rain may create an electrical hazard.
- [⌀] Do not damage or arbitrarily change the original power cord, and do not bend, forcibly pull, bind, or press the power cord under heavy objects. This will damage the power cord, causing electric leakage, fire, or electric shock.
- [⌀] If the machine is not used for a long time, please unplug the power cord from the socket.
- [⌀] If the power cord is damaged, contact your local service center or a qualified electrician to install an appropriate replacement cord to prevent any injury or damage.
- [⚠] Never insert fingers, pencils, or any other object through the guard when the fan is running.
- [⚠] When the power cord is unplugged from the socket, the plug should be unplugged. Do not pull the power cord to forcibly pull the wire, which may cause damage to the wire and lead to leakage or electric shock.
- [⚠] Please disconnect the power supply when cleaning.
PRODUCT DESCRIPTION
TECHNICAL PARAMETER
| Brand | Model | Voltage | Frequency | Power | Speed | Duct Size | Power Cord Length | Working Ambient Temperature |
|---|---|---|---|---|---|---|---|---|
| VEVOR | BT-FL14A | 120 V | 60 Hz | 31 W | 2550 RPM | Φ 100/Φ 125 | 1.6 M | -10~45 °C |
| VEVOR | BT-FL16A | 120 V | 60 Hz | 60 W | 2600 RPM | Φ 150/Φ 160 | 1.6 M | -10~45 °C |
| VEVOR | BT-FL18A | 120 V | 60 Hz | 126 W | 2500 RPM | Φ 200 | 1.6 M | -10~45 °C |
PRODUCT STRUCTURE DIAGRAM
The product features an Intake Flange and an Exhaust Flange. The Motor Box Assembly contains the motor. An Airflow Direction Marking indicates the direction of air movement. A Plastic Buckle is used for securing. The Speed Controller allows for adjustable fan speed. The Power Cord is 1.6M long.
INSTALLATION
TIPS!
Prepare tools in advance: Cross screwdriver, Hammer.
Installation Method:
Step 1:
- Unscrew and loosen the plastic buckle using a Phillips screwdriver. (Refer to Figure 1)
- Remove the motor box assembly from the flange bracket. (Refer to Figure 2)
- Use the flange bracket to set your desired fan position. Mark the four mounting holes. (Refer to Figure 3)
- Drill four holes into the marked locations. Make sure your mounting area is structurally sound and free from obstruction. (Refer to Figure 4)
Step 2:
- If mounting onto anything other than a wood support or stud, insert the included four wall anchors into the drilled mounting holes. You may need to use a hammer to secure them through the holes. (Refer to Figure 5)
- Attach the cushion onto the flange bracket to ensure that the hole of the cushion is aligned with the hole of the flange bracket. (Refer to Figure 6)
- Align the flange bracket's holes with the wall anchors. Screw in four wood screws with a screwdriver or drill to secure the flange bracket. Make sure its airflow arrow is pointing in your desired direction. (Refer to Figure 7)
- Slide the motor box back into the flange bracket, making sure its airflow arrow is pointing in the same direction as the flange bracket's arrow. (Refer to Figure 8)
- Place the plastic clamps back onto the flanges and tighten the screws to secure the motor box. (Refer to Figure 9)
Step 3:
- If installing ducting, purchase a suitable duct and duct clamp and secure it to both ends of the fan to ensure tight sealing. Finally, tighten the air duct clamp with a screwdriver. (Refer to Figure 10)
- If installing with rope hangers, loop the ropes around the flanges and tighten the rope to secure the fan. (Refer to Figure 11)
- Connect the power cord, turn on the switch to check whether the fan is running, then finish the installation.
DIMENSION
The diagram shows the dimensions of the ventilation fan. Key dimensions include A, ØB, C, D, E, F, G (Long hole), H, and H1, measured in millimeters (mm).
| Model | A | ØB | C | D | E | F | G Long hole | H | H1 |
|---|---|---|---|---|---|---|---|---|---|
| BT-FL14A | 302 | Ø98 | 102 | 235 | 60 | 77 | 10X5 | 191 | 102 |
| BT-FL16A | 308 | Ø148 | 120 | 255 | 59 | 77 | 10X5 | 214 | 114 |
| BT-FL18A | 302 | Ø197 | 140 | 275 | 60 | 110 | 10X5 | 235 | 126 |
HOW TO USE
Speed control
The controller has a button, and the fan speed is stepless. Turn the button to adjust the wind speed from the highest to the lowest, and select the wind speed you need. (Refer to Figure 12)
Tip: Slight motor sound is normal when running at low speed.
MAINTENANCE
- Regular maintenance is needed each year. Please power off before maintaining.
- Please DO NOT use chemicals such as gasoline, benzene, and diluent to wipe the fan.
- Please DO NOT let water into motor and electric parts, and do not immerse plastic parts in water with a temperature higher than 60 °C.
- This appliance can be used by children aged 12 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Clean and user maintenance shall not be made by children without supervision.
- If the power line is damaged, to avoid danger, it should be changed by the factory, its maintenance department, or qualified professionals.
CLEANING
- Remove the motor box from the mounting flange. (Refer to installation steps 1 to learn how to remove the motor box). (Figure 13)
- Use a damp cloth to clear the impeller and fan blades of any dust and debris. Remove the wind circle in between the motor box and input flange. (Figure 14)
- Clear the stator blades of any dust and debris on the opposite end. Clean the area inside the output and exhaust flanges. (Figure 15)
- Secure the motor box onto the mounting flanges. Refer to installation steps 2-3 to learn how to secure the motor box. (Figure 16)
ATTENTIONS
- [⚠] High-temperature places forbidden.
- [⌀] Places with overmuch lampblack or steam forbidden.
- [⚠] Please set up vent and spot inspection.
- [⚠] Installation height should be more than 2.3 m.
- [⌀] Below connection way of air duct is forbidden: Overbending, Outlet closed to crook, Multiple bend, Pipe diameter shrinks at connecting part.
- [⌀] Should be firmly installed. Gradient installation forbidden.
- [⌀] Direct spraying or cleaning by water or other liquid is forbidden. This may cause short circuit or electric shock.
- [⌀] Installation on window or outdoor is forbidden.
- [⚠] When connected to power supply, all-pole power switch with more-than-3mm contact separation is necessary to be installed on the power supply circuit. Please do the connection according to the local electrical equipment technical regulations.
- [⚠] Avoiding air reflux via open air flue or other fired equipment is necessary.
- [⚠] Earthing device is necessary. Or will cause electric shock when breaking down or electric leakage occurs.
Environmental & Manufacturer Information
This product is subject to the provision of European Directive 2012/19/EC. The symbol showing a wheelie bin crossed through [♲] indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol. Products marked as such may not be discarded with normal domestic waste, but must be taken to a collection point for recycling electrical and electronic devices.
Manufacturer: Bote electric appliance(Guangdong)Co.,Ltd
Address: 5TH floor, No.28, area 1, Sanlian Industrial Zone, Gulao Town, Heshan City, Jiangmen, Guangdong
MADE IN CHINA
