ePropulsion E Battery Solar Charger 48V 1600W

Introduction

Thank you for purchasing the ePropulsion E Battery Solar Charger 48V-1600W. The E Battery Solar Charger 48V-1600W is a product designed for the E-Series Battery.

Declaration of Conformity

Object of the Declaration:

Product: DC & Solar Charge Controller

Model: MD4830N06

Guangdong ePropulsion Technology Limited hereby declares that this equipment complies with the applicable Directives and European Norms, and amendments.

The object of the declaration is in conformity with the following directives:

• Electromagnetic Compatibility (EMC) 2014/30/EU
• Low Voltage Directive (LVD) 2014/35/EU

Applied Standards:

• EN IEC 61000-6-3:2021
• EN IEC 61000-6-1:2019
• EN IEC 61000-3-2:2019+A1:2021
• EN 61000-3-3:2013+A1:2019+A2:2021
• EN 62109-1:2010

EC REP:

Name: REP Europe GmbH

Address: Werner-von-Siemens-Str. 26, 4319 Pfungstadt, Germany

Phone: +49 157 51253212

Email: info@rep-europe.de

Manufacturer:

Name: Guangdong ePropulsion Technology Limited

Address: Room 801, Building 1, 11 Daxue Road, Songshan Lake, Dongguan, Guangdong Province, China

Date: 2023/10/18

Signature: Shizheng Tao, Chief Executive Officer & Cofounder of Guangdong ePropulsion Technology Limited

Correct Disposal of this Product

This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

Interface Description

The device features several interfaces:

• LED indicator light
• Battery communication interfaces
• Positive interface for Solar Panel
• Common negative interface (GND)
• Positive interface for Battery
• Fixed holes for mounting

Dimensions

Product dimensions: 233mm (width) x 262mm (height) x 100mm (depth).

Mounting dimensions: 215mm x 132mm.

Fixing hole position: φ6mm.

Specifications

Packing List

Notes

• Do not reverse the input and output cable.
• Do not reverse the positive and negative poles of the Solar Charger.
• Use the Solar Charger within the specified voltage range.
• The Solar Charger Input Cable (Negative) and the Solar Charger Output Cable (Negative) are both connected to the GND of the Solar Charger.
• When paralleling multiple solar panels, please ensure that the specifications of the solar panels are consistent.
• Before connecting the E Battery Solar Charger 48V-1600W with a third-party product, please contact an ePropulsion authorized distributor.
• If the E battery is charged by the solar charger without a communication cable, it may not be fully charged to 100%.
• Installation process requires the following tools: Phillips screwdriver, wire crimping pliers (1-5 mm²).

Operations

1. Please follow the wiring diagram below to perform wiring operations without power on.
2. After connecting the wires, please turn on the battery system to power on, and then close the switch between the solar charger and the battery.

Before connecting, please prepare the following products: Main Switch (>50A), Solar Panel.

If there are more complex parallel operating conditions, please contact ePropulsion Technology's authorized dealers.

When the solar charger is connected to E60/E163 and other devices, E60/E163 will prioritize charging using the E battery charger. In this case, you will need to purchase the following additional materials:

Wiring Diagram: Shows the connections between the Solar Panel, Remote Switch, E Battery Solar Charger, E Battery Bus Bar, and E Battery Charger, including cables for remote switch extension, communication, and bridging.

LED Indicator

Status Description of Indicator Lights

Indicator light of solar panel:

Indicator light of battery:

If the indicator light of battery types remains in a steady cyan state, indicating that the connection to the E Battery is normal.

Warranty

The ePropulsion E Battery Solar Charger 48V-1600W is guaranteed against any manufacturing defects for TWO years from the date of delivery of products to end customers.

Free warranty is only validated upon the presentation of the legal serial number, Warranty Card, and evidence of purchase from an authorized ePropulsion dealer.

Conditions

• Valid date of purchase should be established by the first-hand purchaser with the original sales slip.
• Free warranty is not transferable and will not be reissued.
• The warranty is valid only when the information is correct and complete.

Warranty Does Not Cover

• Minor faults producing no influence on the intended function of the product.
• Faults resulting from any improper operation that contradicts the user manual.
• Accessories supplied with the product.
• Damage caused by accident, misuse, or unauthorized repair.
• Damage caused by dropping, improper care, or storage.

If the warranty expires, users can still enjoy maintenance services from ePropulsion authorized dealers with a minimum maintenance charge.

Wiring Diagram Description

The diagram illustrates the system setup. A solar panel connects to the solar charger's input. The solar charger's output connects to a main switch, which then connects to the E Battery Bus Bar. A remote switch is connected to the E Battery Solar Charger via an extension cable. A communication cable connects the solar charger to a T connector, which then links to the E Battery Charger. The E Battery Charger also connects to the E Battery Bus Bar via a bridging cable and receives AC power. The common negative terminals of the solar charger input and output are connected to GND.