User Guide for ZEBRA models including: EM45A2, EM45B2, EM45 Enterprise Mobile RFID, EM45, Enterprise Mobile RFID, Mobile RFID
7 janv. 2025 — 2025/01/07. ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corporation, registered in many jurisdictions worldwide.
EM45A2-3T106B0-NA – Zebra EM45 RFID Enterprise Mobile – 5G, 4G, 2G, 3G, 5G LTE, LTE – 47.24″ – Qualcomm 2.20 GHz – 8 GB RAM – 128 GB Flash – 6.7″ Full HD Touchscreen – LED – Front Camera – Rear Camera – Android Upgradable to Android 16 – Wireless LAN – Bluetooth – Battery Included – IP65, IP68 – ASCS
File Info : application/pdf, 12 Pages, 6.76MB
DocumentDocumentEM45 RFID
Enterprise Mobile Series
Quick Start Guide
MN-005049-01EN Rev A
Copyright
2025/01/07
ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corporation, registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners. ©2024 Zebra Technologies Corporation and/or its affiliates. All rights reserved.
Information in this document is subject to change without notice. The software described in this document is furnished under a license agreement or nondisclosure agreement. The software may be used or copied only in accordance with the terms of those agreements.
For further information regarding legal and proprietary statements, please go to:
SOFTWARE: zebra.com/informationpolicy. COPYRIGHTS: zebra.com/copyright. PATENTS: ip.zebra.com. WARRANTY: zebra.com/warranty. END USER LICENSE AGREEMENT: zebra.com/eula.
Terms of Use
Proprietary Statement
This manual contains proprietary information of Zebra Technologies Corporation and its subsidiaries ("Zebra Technologies"). It is intended solely for the information and use of parties operating and maintaining the equipment described herein. Such proprietary information may not be used, reproduced, or disclosed to any other parties for any other purpose without the express, written permission of Zebra Technologies.
Product Improvements
Continuous improvement of products is a policy of Zebra Technologies. All specifications and designs are subject to change without notice.
Liability Disclaimer
Zebra Technologies takes steps to ensure that its published Engineering specifications and manuals are correct; however, errors do occur. Zebra Technologies reserves the right to correct any such errors and disclaims liability resulting therefrom.
Limitation of Liability
In no event shall Zebra Technologies or anyone else involved in the creation, production, or delivery of the accompanying product (including hardware and software) be liable for any damages whatsoever (including, without limitation, consequential damages including loss of business profits, business interruption, or loss of business information) arising out of the use of, the results of use of, or inability to use such product, even if Zebra Technologies has been advised of the possibility of such damages. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
EM45 RFID Quick Start Guide
Model Numbers
This guide applies to the following model numbers: EM45A2 (EM45 RFID North America) and EM45B2 (EM45 RFID Rest of the World).
Unpacking the Device
Unpack the device from the box. 1. Carefully remove all protective material from the device and save the container for later storage and
shipping. 2. Verify the following are in the box:
· EM45 RFID Enterprise Mobile · SuperSpeed (USB 3.0) USB-C type cable · Regulatory guide 3. Inspect the equipment for damage. If any equipment is missing or damaged, contact the Global Customer Support Center immediately. 4. Before using the device for the first time, remove the protective shipping film.
Charging the Device
Fully charge the device before turning it on. 1. Plug the Zebra 45W power adapter (sold separately) or compatible charger into a wall outlet. 2. Connect the USB-C cable to your device.
3
EM45 RFID Quick Start Guide
Features
Main features of EM45.
1
2
3
4
13
12
5
11
Number
Item
1
Front camera
2
Back camera
3
Integrated RFID
4
Programmable
button (right)
10
9
8
7
6
Description 8 megapixels (MP). 50 MP with Optical image stabilization (OIS). Ultra-high frequency (UHF) RFID. By default, opens Zebra's Workcloud Communication Push-to-Talk (PTT) (if installed), or can be used for other apps, such as Microsoft Teams PTT.
NOTE: Both apps need to be installed separately.
5
Power button
Turns the display on/off. Also used as a fingerprint sensor for unlocking
and biometric
EM45. Go to Biometrics Security for more information.
fingerprint sensor
6
Speaker
Audio output for video and music playback. Provides audio in speakerphone mode.
4
EM45 RFID Quick Start Guide
Number
Item
Description
7
USB-C port
Provides power and communications to the device.
8
Main microphone Communications in handset/handsfree mode, audio recording, and noise
cancellation.
9
Nano SIM/microSD Holds a SIM and/or microSD card.
slot
10
Microphone
Communications in handset/handsfree mode, audio recording, and noise cancellation.
11
Programmable
Opens the Camera app in unlocked mode and wakes up the device
button (top)
(default).
Or it can be used to open other apps, such as a digital voice assistant or duress (emergency) apps that are installed separately
12
Volume buttons Increase and decrease volume.
13
Programmable
Opens Camera barcode scanning for data capture (default).
button (left)
Turning On/Off the Device
When turning on EM45 for the first time, it guides you to set up your Wi-Fi connection and device settings. 1. Press and hold the Power button (right side). 2. Follow the setup prompts (for example, language selection and network connection) displayed on the
device. 3. Tap the Settings app to customize your device. 4. To turn off the device, press and hold the Power button, and then tap Power off.
Protecting Your Device
Securing your device enhances privacy and safeguards personal information from unauthorized access.
Setting a Screen Lock
Protect your device with a screen lock. 1. Go to Settings > Security > Screen lock.
The Choose a screen lock screen displays. 2. Select the backup locking method you want to use for the lock screen.
· Swipe · Pattern · PIN · Password 3. Follow the screen prompt on how to set a lock.
5
EM45 RFID Quick Start Guide
Biometrics Security
Use biometrics to securely unlock your device and log into accounts.
Adding a Fingerprint Lock
Protect your device with your fingerprint. 1. Go to Settings > Security > Fingerprint.
The Choose a screen lock screen displays. 2. Select the backup locking method you want to use for the lock screen.
· Pattern · PIN · Password 3. Follow the screen prompts to register your finger and activate the fingerprint lock. When unlocking your device with your finger, place the registered finger on the Power button.
Setting Up Face Authentication
Protect your device with facial authentication. IMPORTANT: Do not wear a face covering (for example, a mask or sunglasses) when setting up face authentication. 1. Go to Settings > Security > Face Unlock.
The Choose a screen lock screen displays. 2. Select the backup locking method you want to use for the lock screen.
· Face Unlock + Pattern · Face Unlock + PIN · Face Unlock + Password 3. Follow the screen prompts to authenticate your face. When unlocking your device with your face, turn on the display and look at the front camera.
6
EM45 RFID Quick Start Guide
Installing the SIM Card
A SIM card or eSIM is required to make calls and transfer data over a cellular network. The device also offers Dual SIM/Dual Standby (DSDS), which allows users to use an eSIM and SIM card and remain on standby at any time. CAUTION: Follow proper electrostatic discharge (ESD) precautions to avoid damaging the SIM card. Proper ESD precautions include but are not limited to, working on an ESD mat and ensuring the operator is properly grounded. 1. Pull the card holder out of the device.
2. Flip the card holder over.
3. Place the SIM card end, with contacts facing up, into the card holder.
4. Press the SIM card down into the card holder and ensure that it seats properly. 7
EM45 RFID Quick Start Guide
5. Flip the cardholder over and re-install the card holder.
Activating an eSIM
Use an eSIM on EM45. Before using it, activate the eSIM. NOTE: Before adding an eSIM, contact your carrier to obtain the eSIM service and its activation or QR code. 1. On the device, establish an internet connection via Wi-Fi or cellular data with an installed SIM card. 2. Go to Settings > Network & internet. 3. Tap + next to SIMs if a SIM card is already installed, or tap SIMs if there is no SIM card installed.
The Mobile network screen displays. 4. Select:
· MANUAL CODE ENTRY to enter the activation code, or · SCAN to scan the QR code to download the eSIM profile. The Confirmation dialog box displays. 5. Tap OK. 6. Enter the activation code or scan the QR Code. 7. Tap NEXT. The Confirmation dialog box displays. 8. Tap ACTIVATE, and then Done. The eSIM is now activated.
Deactivating an eSIM
Turn off an eSIM temporarily and re-activate it later. 1. On the device, establish an internet connection via Wi-Fi or cellular data with an installed SIM card. 2. Tap Settings > Network & internet > SIMs.
8
EM45 RFID Quick Start Guide
3. In the Downloaded SIM section, tap the name of the eSIM to deactivate. 4. Tap Use SIM switch to turn off the eSIM. 5. Tap Yes.
The eSIM is deactivated.
Erasing an eSIM Profile
Erasing an eSIM profile removes it completely from the device. NOTE: After erasing an eSIM from the device, you cannot use it again. 1. On the device, establish an internet connection via Wi-Fi or cellular data with an installed SIM card. 2. Tap Settings > Network & internet > SIMs. 3. In the Downloaded SIM section, Tap the name of the eSIM. 4. Tap Erase.
The Erase this downloaded SIM? message displays. 5. Tap Erase.
The eSIM profile is now erased from the device.
Installing the microSD Card
The microSD card slot provides secondary, non-volatile storage. For more information, refer to the documentation provided with the microSD card and follow the manufacturer's recommendations for use. It is strongly recommended that you format the microSD card on the device before use. CAUTION: Follow proper electrostatic discharge (ESD) precautions to avoid damaging the microSD card. Proper ESD precautions include but are not limited to, working on an ESD mat and ensuring that the operator is properly grounded. 1. Pull the card holder out of the device.
9
EM45 RFID Quick Start Guide
2. Place the microSD card, contact end first, with contacts facing up, into the card holder. 3. Press the card down into the card holder and ensure that it seats properly. 4. Re-install the card holder.
RFID Scanning Considerations
The following hand grips are recommended to ensure the RFID function works properly. Optimal Hand Grips NOTE: When holding the device, ensure your hand and fingers are below the RFID antenna.
10
EM45 RFID Quick Start Guide
IMPORTANT: For optimal RFID performance, avoid placing hands and fingers on the RFID antenna.
Scanning with Integrated RFID
EM45's RFID reader uses the device's capabilities to communicate with RFID tags in an open environment. By emitting radio waves, the reader can detect, read, or write data to the tags within its range. Using the 123RFID Mobile app The 123RFID app demonstrates the device's functionality to read RFID tags. · When opening the 123RFID Mobile app for the first time, it automatically connects to your device. Follow
the prompts to complete regulatory requirements. · From the RFID tab, start tag reading from the Rapid (Read) or Inventory screen. · For more information on the 123RFID Mobile app, go to the Zebra 123RFID Mobile Support page or
EM45 RFID User Guide.
Service Information
Repair services using Zebra-qualified parts are available for three years after the end of production and can be requested at zebra.com/support.
11
www.zebra.com
PatentsPatents
Zebra Technologies | Visible. Connected. Optimized. | ZebraCopyright and Trademarks | ZebraSoftware Product Categories and End User License Agreements | ZebraProduct Warranty Information | Zebra
Copyright and Trademarks | ZebraSoftware Product Categories and End User License Agreements | ZebraLegal | ZebraSupport and Downloads | ZebraProduct Warranty Information | ZebraSupport and Downloads | ZebraZebra 123RFID Mobile Support | Zebra