LELO SWITCH User Manual
Congratulations on acquiring the LELO SWITCH™. Please review this user manual before use.
IMPORTANT INFORMATION
Your pleasure object has been locked for transportation. To unlock, connect the charger.
SAFETY
- Consult a healthcare provider for any health concerns.
- This product is for adult use only. Keep out of reach of children.
- Individuals with reduced physical, sensory, or mental capabilities should use only under supervision and with understanding of the hazards.
- Use only for the intended purpose. Do not share with others to prevent transmission of sexual diseases.
- Use protective measures with your partner if necessary.
- Do not use if the product shows signs of degradation or damage.
- Avoid contact with absorbent surfaces to prevent stains. If the product operates abnormally, turn it off and consult the support section on the LELO website.
- Do not use if any components are damaged.
COMPLIANCE STATEMENT
WARNING
Unauthorized changes or modifications may void user authority and warranties.
FCC and IC Statements
This device complies with Part 15 of the FCC Rules and Industry Canada license-exempt RSS. Operation is subject to two conditions: (1) it may not cause harmful interference, and (2) it must accept any interference received. This class B digital apparatus complies with Canadian ICES-003.
Déclarations relatives à la FCC et à l'IC
Cet appareil est conforme aux exigences de l'article 15 du Règlement de la FCC et aux normes RSS exemptes de licence d'Industrie Canada. Son fonctionnement est soumis aux conditions suivantes : (1) cet appareil ne doit pas causer d'interférences nuisibles, et (2) il doit accepter toute interférence reçue. Cet appareil numérique de classe B est conforme à la norme canadienne NMB-003.
NOTE ON RF EXPOSURE
This equipment has been tested and found to comply with FCC and Industry Canada limits for Class B digital devices. It generates, uses, and can radiate radio frequency energy. If interference occurs, try reorienting the antenna, increasing separation, using a different circuit, or consulting a professional. The device must not be co-located or operated with any other antenna or transmitter. It complies with general RF exposure requirements and can be used in portable exposure conditions without restriction. It also complies with IC RSS-102 radiation exposure limits for an uncontrolled environment.
GETTING TO KNOW YOUR LELO SWITCH™
The LELO SWITCH™ is a double-sided wand vibrator with sensorial ribs on both sides for enhanced clitoral pleasure. It features two powerful motors for external and internal stimulation and app connectivity for customizable control.
Key Features:
- Sensorial ribs: On both sides for enhanced pleasure.
- + / - Intensity control buttons: Adjust vibration intensity.
- (()) Power ON/OFF & Mode selection button: Turn the device on/off and switch between modes.
- Charging port: Located at the base of the device.
HOW TO FIND FCC ID AND IC INFORMATION IN THE USER APP:
- Open the LELO APP.
- Click Menu > Legal & Regulatory.
- Click LELO SWITCH™.
- FCC ID: ZT5-WAND
- IC: 9798A-WAND
- HVIN: LELO SWITCH™
- PMN: Handheld Massager
USING YOUR LELO SWITCH™
HOW TO USE YOUR PRODUCT WITHOUT THE LELO™ APP
- Charge the LELO SWITCH™ for 2 hours before first use.
- Press the + or the (()) button to turn it on.
- Press the (()) button to switch between 10 different modes.
- Use the + and - buttons to increase or decrease intensity.
- Press and hold the (()) button to turn off the device, or use the + and - buttons simultaneously to turn it off and lock it.
HOW TO USE YOUR PRODUCT WITH THE LELO™ APP
- Charge the LELO SWITCH™ for 2 hours before first use. Download the iOS / ANDROID version of the LELO™ app.
- Press the (()) button for 3 seconds to turn it on and activate Bluetooth. LED lights will blink, indicating Bluetooth pairing.
- Open the LELO™ app, locate the toy icon, find your LELO SWITCH™, and select "Connect". Press and hold the button on your device to confirm connection.
- Go to "MY LELO TOYS" and select "PLAY".
- Choose between 4 regular control modes (Manual, Screw, Shake, Swiping) or 2 advanced modes (Finish Me Off, Out Of Control).
- Go to "SETTINGS" to customize preferences.
- Click "SAVE" to save settings for offline use.
- Use the drop-down menu to set auto power off (10-20 minutes). The battery level is displayed in the upper left corner.
For more information about the LELO™ app, refer to the detailed instruction manual.
USING LELO SWITCH™
How to hold
[Image of how to hold the LELO SWITCH]
Where to place - option 1
[Diagram showing placement for internal and external stimulation, indicating Clitoris and Vagina]
Where to place - option 2
[Diagram showing alternative placement for internal and external stimulation, indicating Clitoris and Vagina]
The LELO SWITCH™ will automatically shut down after 20 minutes of inactivity to save battery.
Tip: For enhanced sensation, apply a liberal amount of LELO Personal Moisturizer to your body and the LELO SWITCH™ before and during use.
CHARGING YOUR LELO SWITCH™
- Insert the DC plug into the DC port at the base of your LELO SWITCH™.
- Insert the mains plug into a USB Port.
The LED on the interface will pulse while charging. A steady glow indicates a full charge. A blinking white light indicates low battery.
[Image of the LELO SWITCH with its charging cable]
Only use original LELO chargers with your LELO SWITCH™.
CLEANING, STORAGE, AND SAFETY
Using hand creams or silicone-based lubricants may make the silicone permanently tacky.
The LELO SWITCH™ is fully waterproof. Clean by rinsing and spraying with LELO Toy Cleaner, then rinse again and allow to dry.
Clean thoroughly before and after each use. Wash the silicone with warm water and antibacterial soap, rinse with clean hot water, and pat dry with a lint-free cloth or towel. Never use cleansers containing alcohol, petrol, or acetone.
Avoid direct sunlight and extreme heat. Store in a dust-free place away from other materials.
The appliances must only be supplied at SELV.
TROUBLESHOOTING
The LED on your LELO SWITCH™ does not pulse when the charger is connected:
- The battery is drained and needs several minutes to acknowledge charging.
- The charger is not properly connected. Check wall and DC sockets.
Your LELO SWITCH™ does not activate when the (()) button is pressed:
- The battery is empty. Recharge your LELO SWITCH™.
- The interface of your LELO SWITCH™ is locked. Hold down + and - for 3 seconds.
For other issues or questions, contact: customercare@lelo.com
SPECIFICATIONS
- Materials: Food grade silicone, ABS Plastic
- Finish: Ribbed
- Size: 217 x 64 x 43 mm / 8.5 x 2.5 x 1.7 in
- Insertable length: 83 mm / 3.3 in
- Weight: 167±10%g
- Battery: 3.7V lithium battery with 1000mAh
- Charging: Less than 2 hours at 5V 1000mA
- Rated Power: Input: 5V 1000mA 5W, Output: 3.7V 800mA 2.96W
- User time: Up to 2 hours. Auto shuts down every 20 minutes.
- Standby: 90 days
- Frequency: Top motor: 100Hz, Handle motor: 93Hz
- Max. noise level: < 63 dB
- Interface: 3 buttons, 2 LEDs
REGISTER WARRANTY
Activate your 1-year limited warranty by registering the number from the LELO Authenticity Card at LELO.COM/SUPPORT.
1-YEAR WARRANTY
LELO warrants this pleasure object for ONE (1) YEAR from the date of original purchase against defects in workmanship or materials. The warranty covers functional parts and does not cover cosmetic deterioration or damage from accident, misuse, or neglect. Attempting to open or disassemble the product voids the warranty. If a defect is found and reported during the warranty period, LELO will replace the object at its discretion. Claims require reasonable evidence of purchase date within the warranty period. Keep your original purchase receipt. To claim, log in to your LELO.COM account and select the warranty claim option. Shipping costs are non-refundable. This does not affect statutory consumer rights.
DISPOSAL INFORMATION
Disposal of old electronic equipment (EU and other European countries):
The crossed-out dustbin symbol indicates this product should not be treated as household waste. Bring it to the appropriate collection point for electrical and electronic equipment recycling.
[CE logo] [RoHS logo] [Recycling symbol] [WEEE symbol] [UK CA logo] [FCC logo] [Other certification logo]
SERIAL NO. [SN logo]
MANUFACTURE DATE
FOLLOW INSTRUCTIONS FOR USE [Image of QR code and disposal instructions]
LELOi AB declares that the radio equipment type [Non-Specific Short Range Device] complies with Directive 2014/53/EU and Directive 2011/65/EU (RoHS). The full EU declaration of conformity is available at: https://www.lelo.com/regulatory
DISCLAIMER: Users use this product at their own risk. LELO and its retailers assume no liability. Unauthorized modifications may void the user's authority to operate the equipment. The model may be changed without notice.
© 2025 LELOi AB. All rights reserved.
LELOi AB, Karlavägen 41, 114 31 Stockholm, Sweden.
Distributed in the US by LELO USA Inc., 5799 Fontanoso Way, San Jose, CA 95138, USA.
Distributed in Australia by LELO Oceania 6 Prohasky Street, Port Melbourne, VIC 3207, Australia.
Designed and developed by LELO Sweden. Made in China.
US and International patents or patent applications apply to this product: visit https://www.lelo.com/intellectual-property