Scottoiler vSystem Motorcycle Chain Oiler Installation Guide

Model: vSystem (SO-1005)

Tools Required

The following tools are recommended for installation:

8mm wrench
3mm Allen key
4mm Allen key
5mm Allen key
10mm socket or wrench
12mm socket or wrench
13mm socket or wrench
14mm socket or wrench
15mm socket or wrench
17mm socket or wrench
19mm socket or wrench
20mm socket or wrench
21mm socket or wrench
22mm socket or wrench
23mm socket or wrench
24mm socket or wrench
25mm socket or wrench
26mm socket or wrench
Zip ties
Cutting tool (e.g., knife or scissors)
100% IPA (Isopropyl Alcohol) for cleaning

Installation Steps

Step 1: Preparation

Ensure the motorcycle frame is clean and free of oil. This is crucial for proper adhesion of components.

Step 2: Mounting the Reservoir

Attach the reservoir to a suitable location on the motorcycle frame. The diagrams show various mounting options depending on the motorcycle model.

Step 3: Routing the Delivery Tube

Connect the vacuum tubing to the engine's vacuum source. Route the delivery tube along the swingarm towards the rear sprocket. Ensure the tube is secured and will not interfere with the wheel or suspension.

Step 4: Attaching the Dispenser

Secure the dispenser to the swingarm, ensuring it is positioned to deliver oil directly onto the chain. The dispenser should be approximately 6mm from the chain.

Step 5: Connecting the System

Connect the reservoir to the delivery tube and the dispenser. Ensure all connections are secure.

Step 6: Priming the System

Prime the system by turning the dial on the reservoir. Follow the instructions for priming, which typically involves setting the dial to 'Prime' for a specific duration (e.g., 60 seconds) with the engine running.

Step 7: Setting the Flow Rate

Set the oil flow rate according to the manufacturer's recommendations and riding conditions. The dial can be adjusted between 'Min' and 'Max'.

Step 8: Final Checks

Double-check all connections and ensure the system is securely mounted. Test the oil delivery by rotating the rear wheel.

Multilingual Component Labels

PURGE VALVE: EN: PURGE VALVE, DE: ABLASSVENTIL, FR: SOUPAPE DE PURGE, ES: VÁLVULA DE PURGA, IT: VALVOLA DI SPURGO, NL: AFVOERKLEP
VACUUM TUBING: EN: VACUUM TUBING, DE: VAKUUMLEITUNG, FR: TUYAU DE VIDE, ES: MANGUERA DE VACIO, IT: LINEA VACUUM, NL: VACUUMLIJN

Product Information & Registration

Watch installation videos at: www.scottoiler.com/vsystem/videos

Find installation guides at: www.scottoiler.com/mybike

Get tips for your system at: www.scottoiler.com/tips

The vSystem is CARB E.O. compliant.

Scottoiler recommends using only Scottoiler Blue/Red oil.