EPOMAKER x AULA F99 Wireless Mechanical Keyboard

Functions and Indicators

GH: RGB light/power indicator

Shi: Capslock indicator

13: NUM indicator

USB receiver: USB receiver

Mode switch 2.4G/Wired/BT: Mode switch 2.4G/Wired/BT

Type-C: Type-C port

Product Features

• Stylish design with Gasket construction and a fine, soft and flexible feel.
• Keycaps and mechanical switches are pluggable.
• 4000mAh*2 large-capacity lithium battery can be recharged, with power switch, environmental protection and energy saving, saving worry and money, effectively extending battery life.
• FN + `~ key combination to switch between 15 RGB light effects.
• With the drive, there are music rhythm RGB lighting effects with 5 lighting effect modes to choose from.
• Cooperate with the drive for custom functions and macro definitions.
• Humanized design of the keyboard, adding a series of commonly used shortcut keys.

Specifications

• Connection: Type-C wired & 2.4G wireless & BT
• Construction: Gasket construction
• Number of keys: 99 keys
• Switches: Pluggable mechanical switch
• Lighting: RGB switchable lighting effects
• Battery: Rechargeable lithium battery 4000mAh*2
• Charging voltage/current: DC 5V/≤830mA
• Rated voltage: DC 3.7V
• Battery life: ≥ 53 hours (default lighting effect), ≥400 hours (with backlight and side lights off)
• Dimensions: 390.63 (L) ×146.78 (W) ×42.57 (H) ±0.5mm
• Weight: 1183g
• Operating system: WIN XP/7/8/10/Android/IOS/MAC

Description of Shortcut Keys

Note: Switch to the corresponding mode in the upper left corner (FN + `~/1/2/3) to use the long press function.

Function Keys (F1-F12)

Android System (FN+Q)

Windows System (FN+W)

Mac System (FN+E)

IOS System (FN+R)

Operating Instructions

2.4G Mode

1. Set the upper left switch to 2.4G mode. The cyan light of the `~ key blinks slowly.

2. Press and hold FN + `~ for 3 seconds to enter code pairing state.

3. Plug in the USB receiver to finish code pairing. The cyan light of the `~ key stays on for 2 seconds, indicating successful 2.4G connection.

Note: Factory default pairing code is already set.

BT Mode

1. Toggle the top left switch to Bluetooth mode (BLE5.0/BLE3.0, device names: AULA-F99 3.0/AULA-F99 5.0). The keyboard can connect to 3 devices.

2. FN+1: Connect to BT 1. The blue indicator light under the key flashes rapidly. When returning to connect, it flashes slowly. The blue light stays on for 2 seconds upon successful connection.

3. FN+2: Connect to BT 2. The blue indicator light under the key flashes rapidly. When returning to connect, it flashes slowly. The blue light stays on for 2 seconds upon successful connection.

4. FN+3: Connect to BT 3. The blue indicator light under the key flashes rapidly. When returning to connect, it flashes slowly. The blue light stays on for 2 seconds upon successful connection.

Wired Mode

1. Set the top left switch to the center position for wired mode. The white light on the "4" button lights up for 2 seconds.

Restore Default Settings

Press and hold FN + ESC for three seconds to restore default settings. Saved BT device connections will not be cleared.

Lighting Controls

• FN+Shift-R: Switch light bar light mode.
• FN+/?: Switch light bar colour.
• FN+Alt-R: Cycle through light bar brightness.
• FN+Ctrl-R: Cycle through light bar speed.
• Fn+↑: Increase brightness.
• Fn+↓: Decrease brightness.
• Fn+→: Increase speed.
• Fn+B: Cycle through RGB ambient light bar speeds.
• FN+Tab: Toggle light effect colour.

System Switching

• FN+Q: Switch to Android system.
• FN+W: Switch to Windows system.
• FN+E: Switch to Mac system.
• FN+R: Switch to IOS system.

Other Functions

• FN+WIN-L: Lock/unlock the Windows key. The WIN indicator light stays on when locked (under Windows system).
• Note: After switching to Mac/IOS system, the WIN-L/ALT-L positions are swapped (without locking WIN).
• FN+B: The RGB ambient light bar can display the keyboard power level. Charging light display: Full charge shows a solid green light. Each green light indicates 20% battery. Low battery is indicated by all red lights.