SKS3200M-4GPY2XF Simple Managed Switch

Warranty Card

Product: SKS3200M-4GPY2XF Simple Managed Switch

Purchase Date: [Date]

Serial Number (SN): [Serial Number]

Dealer Name: [Dealer Name]

User Name: [User Name]

Telephone: [Telephone]

Notes:

• This product warranty card is the only proof of product warranty.
• The product warranty regulations are subject to the 'Product warranty terms'.
• When purchasing this product, the user must fill in the warranty card in detail, so as to check whether the serial number, product trademark and model of the main body are consistent for future maintenance.

Manufacturer Information:

AnHui Seeker Electronics Technology Co.Ltd

Address: Room 501-502, North Tower, Baili Center, No. 888, Qianshan Road, Hefei, Anhui, China

Official website: www.seekswan.com

After-sales hotline: 400-8570075

Product Details

The SKS3200M-4GPY2XF is a self-developed simple management switch product. It provides 4 adaptive 10M/100M/1000M/2.5Gbps RJ45 ports and 2 1000M/2.5G/10Gbps SFP+ optical fiber module expansion slots for flexible network expansion. Each RJ45 port supports Auto-MDI/MDIX and line-speed forwarding. The store-and-forward technology ensures effective bandwidth allocation to each port, making it powerful and flexible for deploying wireless access points or IP-based network surveillance cameras. It is widely used in small and medium-sized enterprises, hotels, parks, network convergence, and core applications.

Package List

When using the switch for the first time, carefully open the packaging box, which should contain the following accessories:

• SKS3200M-4GPY2XF Switch x1
• User Manual x1
• Certificate x1
• Power cord x1

Technical Specification

Product Name: SKS3200M-4GPY2XF managed network switch

Standard: IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab, IEEE 802.3bz, IEEE 802.3z, IEEE 802.3ae

Network Media:

• 10 MB: Cat 3,4,5 UTP (≤250m)
• 100 MB: Cat5 or Later UTP (150 m)
• 1000 Megabit: Cat6 or Later UTP (150 m)
• 2500 MB: Cat6 or Later UTP (100 m)
• SFP: Supports 100M/1G/2.5G/10G single-mode/multi-mode optical modules, maximum distance ≤120km (depending on the optical module)

Transmission Mode: store-and-forward

MAC Address Table: 4K

Switching Capacity: 60Gbps

Jumbo Frame: 12Kbyte

Packet Forwarding Rate: 44.64Mpps

Dimensions (L * W * H): 140(L)x93(W)x28(H)mm

Power Input: DC12V 2A

Operating Temperature: -10°C to 50°C

Storage Temperature: -40°C to 70°C

Working Humidity: 10% to 90% non-condensing

Storage Humidity: 5% to 95% non-condensing

Chapter 1: Product Appearance Description

1.1 Front Panel

The front panel includes four 100/1000/2500Mbps adaptive RJ45 ports, two 10Gbps SFP+ ports, and associated indicators.

Port Description:

• 100/1000/2500Mbps Adaptive RJ45 Port: Supports 100 Mbps, 1000 Mbps, 2500 Mbps rate adaptation, Auto-MDI/MDIX function. Ports 1-4 have corresponding indicator lights.
• 10Gbps SFP+ Slot: Independent 10G optical module slots on the right side of the panel. Uses 10G/2.5G/1G optical modules (SR/LR/LRM/ER/ZR). Ports 5-6 indicators are located to the right of the ports.

1.2 LED Indicator

The LED indicators provide status information for the switch:

1.3 Rear Panel

The rear panel features a DC power socket and a lightning protection terminal.

• DC Power Interface: Connect the negative plug of the power cord to the switch and the positive plug to the AC power supply.
• Lightning Protection Power Port: Located to the right of the power port. Ground with a wire to prevent lightning strikes.

Chapter 2: Installation Guide

This section guides you through the proper installation and secure use of the switch.

2.1 Installation Notes

To avoid equipment damage and personal injury, follow these precautions:

• Ensure the switching equipment room is dry, ventilated, and free from corrosive gases and strong electromagnetic interference.
• Maintain humidity below 90% in the equipment room.
• Ground the switch according to the manual's requirements and ensure a good ground connection.
• Ensure stable voltage supply to prevent abnormal operation due to power fluctuations.
• Maintain adequate spacing between switches and other devices; do not stack them.
• Use standardized and reasonable connection cables for the distribution frame. Keep jumpers concise and clear to prevent parallel or double lines.
• Do not open the case without authorization to avoid electric shock. Contact professionals for repairs.

Safety Tips:

• Ensure the PGND cable of the power socket is reliably grounded.
• Ensure the switch has adequate space for heat dissipation and ventilation.
• Do not place heavy objects on the switch.

2.2 Installation Environment

Before installation, confirm a suitable working environment, including power requirements and sufficient space. Ensure proximity to other devices and that they are in place.

Installation Requirements:

• Ensure the workbench is stable and well-grounded.
• Check cable and connector availability and proper installation.
• Environment Requirements: Operating temperature: -10°C to 50°C; Relative humidity: 10% to 90%.

2.3 Installation Mode

The switch can be installed in two ways:

• Desktop Installation: Carefully place the switch on a workbench, ensuring sufficient space around for heat dissipation.
• Wall-mounted: Fix a hook (purchased separately) to the wall according to the switch's connecting hole spacing. Place the switch parallel to the wall on the hook, ensuring adequate space for heat dissipation.

2.4 Starting a Switch

After powering on, the switch initializes automatically. If all port indicators light up and then turn off, the system has reset successfully, and the PWR indicator remains on.

Note: Ensure the voltage is correct before powering on the device to prevent damage.