INIA

Product Description

The INIA device is designed for at-home hair removal. Key components include:

• Power Socket: Located at the base of the device for power connection.
• Power Button: Situated on the side for turning the device on and off.
• Mode Switch Button: Located on the side, below the power button, to change treatment modes.
• Power/Flash-ready Indicator: Displays the device's power status and readiness for flashing.
• Air Outlet: Vents on the side for cooling the device.
• Intensity Level Indicator: A series of dots on the front display area indicating the selected energy level.
• Skin Detection Area: Located at the bottom front of the device, it senses skin contact.
• Flash Window: The emission point for the light energy, positioned below the skin detection area.
• Flash Button: A large circular button on the front used to initiate a flash.
• Auto Mode Indicator: Illuminates when the device is in automatic mode.
• Display Area: Shows selected treatment modes (e.g., INDIB, FACE, BODY) and intensity levels.

Use Steps

1. STEP 1: Perform gentle wet shaving prior to hair removal to prepare the skin.
2. STEP 2: Wear protective goggles to shield your eyes from the light.
3. STEP 3: Power on the device using the Power Button and select the desired intensity level using the Mode Switch Button. Ensure the device is held at a 90° angle to the skin for optimal contact.
4. STEP 4: After treatment, apply suitable skincare products and ensure adequate sun protection for the treated area.

Suitability Charts

Skin Tone Chart

This chart helps determine your suitability for the device. It categorizes skin tones into 'Safe and Effective' and 'Not Safe' for treatment.

Hair Color Chart

This chart indicates hair colors that are considered 'Effective' for treatment and those that are 'Not Effective'.

Determine your skin suitability using the provided skin tone comparison card. Skin reactions may vary due to different factors; adjust usage based on your skin's actual condition.

Safety Guidelines and Contraindications

Safety Guidelines

• Ensure skin is dry while using the device. ⚠️
• Cleanse and remove makeup before using. ⚠️
• Use a maximum of 3 flashes per area to prevent irritation. ⚠️

Contraindications

• Tattoos ❌
• Skin Damage/Moles/Spots/Scars ❌
• Pregnancy and Breastfeeding ❌

* For sensitive skin areas (e.g., bikini line), it is recommended to start from level 1.

* Please read the contraindications, precautions, and other information in the product manual carefully before use, or purchase and use under the guidance of medical staff.