Mounting Racing Wheels & Pedals
Please contact the manufacturer directly for information about specific racing wheel cockpits and stands.
PS4-052 Racing Wheel APEX for PlayStation®4
PS4-142 Wireless Racing Wheel APEX for PlayStation®4
Racing Wheel Unit
※1: This product uses a clamp instead of screws for mounting.
※2: The racing wheel can be attached to a hard surface that has a thickness of 6mm~45mm. Please refer to Image 2 for reference. This product will not properly attach to a surface that exceeds 6mm~45mm.
Clamp Attachment:
- 10mm bolt hole (for the clamp)
Dimensions (approximate): 268mm x 187mm
Pedal Unit
※1: This product uses a clamp instead of screws for mounting.
※2: A strap may be needed to properly attach the racing wheel to the racing wheel cockpit.
Footrest (stored):
Dimensions (approximate): 124mm
Footrest (in use):
Dimensions (approximate): 180mm x 58mm x 171mm, 230mm x 124mm
AB04-001 Racing Wheel Overdrive for Xbox Series XS
Racing Wheel Unit
※1: This product uses a clamp instead of screws for mounting.
※2: The racing wheel can be attached to a hard surface that has a thickness of 6mm~45mm. Please refer to Image 2 for reference. This product will not properly attach to a surface that exceeds 6mm~45mm.
Clamp Attachment:
- 10mm bolt hole (for the clamp)
Dimensions (approximate): 168mm x 241mm
Pedal Unit
※1: This product uses a clamp instead of screws for mounting.
Dimensions (approximate): 212mm x 301mm x 270mm, 150mm x 127mm x 227mm
AB05-001 Force Feedback Racing Wheel DLX for Xbox Series XIS
Racing Wheel Unit
※1: This product can be attached to a racing cockpit compatible with M6 bolts.
※2: Two M6 bolts are needed to attach this product to a racing wheel cockpit.
※3: The length of the M6 bolt can be the thickness of the fixed surface + 10 mm to 25 mm. If wider bolts are used, there is a risk that the inside of the product may be damaged, or it may not properly attach. Please refer to the image below.
M6 Bolt:
Dimensions (approximate): 92mm
Clamp Attachment:
- 10mm bolt hole (for the clamp)
Dimensions (approximate): 245mm x 136mm x 201mm, 167mm
Pedal Unit
※1: The racing wheel can be attached to a hard surface that has a thickness of 6mm~45mm. Please refer to Image 2 for reference. This product will not properly attach to a surface that exceeds 6mm~45mm.
※1: This product can be attached to a racing cockpit compatible with M6 bolts.
※2: Three M6 bolts are needed to attach this product to a racing wheel cockpit.
※3: The length of the M6 bolt can be the thickness of the fixed surface + 10 mm to 25 mm. If wider bolts are used, there is a risk that the inside of the product may be damaged, or it may not properly attach. Please refer to the image below.
M6 Bolt:
Dimensions (approximate): 187mm x 298mm x 267mm, 235mm x 53mm x 154mm, 115mm x 119mm x 332mm
