Instruction Manual for TELEFUNKEN models including: TF-LED24S80T2 LED TV with LED Backlight, TF-LED24S80T2, LED TV with LED Backlight, LED Backlight, Backlight
File Info : application/pdf, 40 Pages, 2.12MB
DocumentDocument.
LCD TV with LED backlight (LCD)
TF-LED24S80T2
Instruction manual
Table of contents
.
Table of contents
Dear customer! Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefully before connecting, operating and/or adjusting the product and keep the manual for reference in the future.
2
Before you start
.
Before you start
Utilization of the product
If you want to dispose of this product, do not mix it with general household waste. There is a separate collection system for used electronic products in accordance with legislation that requires proper treatment, recovery and recycling.
Please contact your local authorities for the correct method of disposal. By doing so, you will ensure that your disposed product undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health.
Important safeguards
· Please unplug the power cord from the AC outlet and contact a service center for repair if following occurs: any obvious abnormality appears in the unit, such as smoky, peculiar smell or strange sound; liquid has been spilled or other objects have fallen into the unit; no picture or sound; cover or panel is broken; although you have operated the unit following the operating instructions, it still cannot work normally.
· This unit can be connected to a power supply outlet without the third ground contact as well as with a ground contact.
· Always disconnect the power cord and antenna during a storm.
· Do not fix the power cord with a metal nail. · Unplug the power cord from the AC outlet; also unplug the signal cables from the input ports when the unit is unused for long periods of time. · When unplugging the plug, always hold the wide slot, do not touch the metal part, and do not destroy, twist, pull or roast the power cord. · Please contact the service center immediately if you found that the core is showed in the air or has been broken. · Please replace the AC outlet if the metal bolt cannot be inserted into the power socket completely or it cannot be fastened even when it was pushed in, otherwise, any accidents of shocks and fires would happen.
· Never touch the antenna lie or power plug if it stars to thunder.
· Do not touch the power plug with wet hands.
· Do not use any non-rated power socket with numerous devices jointed on one power socket or cable device. The wire of nondesignated capacity may cause the fire due to the generation of heat.
· All instructions must be read and understood well before you operate the unit. Heed all warnings and follow all instructions.
· Please use the accessories provided by the manufacturer. Using inadequate accessories may result in accidents.
· Please adjust the product through the panel buttons or the remote controller, do not remove the cover or attempt to service the product by yourself. Do not disassemble back cover and do not make maintenance by yourself to avoid the electric shock.
· Over-press the panel may destroy the product.
· Do not place the product on an unstable cart, stand surface, tripod, bracket, or table. The product may fall, causing serious accidents as well as the damage to the product.
· Please place the product on a flat surface
in a well-ventilated location. Keep it away from
the burning-light, direct sunlight, vibration,
high-temperature and humidity.
· Do not place any vase, potted plant, cup,
medicine and any container with water on this
3
.
Before you start
Before you start
product. If the liquid is spilt, it may cause the fire, electric shock or breakdown.
· Do not install it at the place on the strong magnetic field or current field. It may cause break down. This equipment may be observed deterioration of the picture by electromagnetic radiation in electromagnetic environment.
· Fasten the wheel of the product or shelf with wheels when installing this product. If it moves or is tipped over, it may be damaged.
· Do not place any fire source such as candlelight close to this product or place it on this product. If it is tipped over or fallen down, it may cause damage or fire.
· Do not place the unit into closed space of TV for better ventilation; it can reduce the product lifetime. Keep a space at least 10 cm at above, left, and right of the TV.
· Please place all the signal cords behind of rear panel.
· Do not overexert or touch the panel when you convey the product. Do not transfer the LED TV up or down display direction.
· Do not transport it with the power cord or the connection cable connected. If you move this product with the power cord or the connection cable connected, damaged power cord, connection cable or connection terminal may cause fire, electric shock or breakdown.
· 2 persons or more shall transport the device, which is heavier than 18 kg. If you drop or tip over the device, it may damage it.
· The temperature of the product's body becomes a little higher after a long period use. This phenomenon indicates that heat exchange in normal working mode, thus please do not let children or anyone who is sensitive of temperature to touch.
All images provided herein are schematic drawings and may differ from real objects.
Installation Wall mounting For wall mounting the back panel of this unit is equipped with a VESA slot. A 75*75 mm VESA wall-mount bracket should be used for wall mounting. The wall-mounting bracket is not included and should be acquired separately. Manufacturer is not responsible for improper mounting resulting in a damage to the unit. Stand installation Cover a flat stable surface with a soft cloth. Place the TV unit face-down on the cloth. Insert the support legs and fix them with supplied screws as shown below.
Wall or ceiling mounting implements must be durable and sufficient enough to support the weight of the unit.
WARNING In order to avoid damage, make sure to secure the unit on the wall according to the wall mounting instruction.
4 4
.
Connection
Before you start
Before you start
Antenna cable connector 75 Ohm co-axis cable
TVRF antenna jack
Outdoor antenna connection Use 75 Ohm cable plug or 300-75 Ohm impedance converter to plug in antenna input terminal on the rear of the cabinet.
Other connections
· Connect the video source to the AV input using a CVBS cable (not included).
· Connect the audio source to the Left and Right stereo audio inputs.
· Plug the power cable in the electric outlet, making sure the current voltage is supported.
· If the video source has a HDMI output jack, you can connect the signal to the monitor with the HDMI cable (not included).
· Optical output is intended for transmitting multi-channel sound to an external decoder (e.g. in 5.1-CH format). Optical cable should be used for connection (not included).
· Connect your headphones or earphones (not included) to the headphone socket of this unit. When earphones are connected, the sound output through the built-in speakers of this unit is mute.
· CI slot is used for CI (PCMCIA) modules that are obtained from your digital TV provider.
5 5
.
Operation
Control elements
Operation
1 1. Remote control sensor 2. Rocker button
Press the rocker button to call the setting menu, where you can enter main menu, power off or select the source.
· Menu: press to display the main OSD menu.
· Source: press to open the signal source interface.
· Power: press to go to standby. · Exit: exit the setting menu.
TV Status Powered Off
In OSD menu
Outside OSD menu
Pull Up / Down ---
Pull Left / Right ---
Press OK Press to power on
Move Up / Down
Move Left / Right
Press to confirm Press and hold to go back
Channel + / -
Volume - / +
Press to open the setting menu
Back panel terminals
The terminals are (from left to right): USB port, HDMI-2 (ARC) input, HDMI-1 (MHL) input, earphone socket, composite AV input.
Back panel terminals (side)
The terminals are (from left to right): TVRF antenna socket, CI (PCMCIA) slot, optical output.
6 6
.
Operation
Operation
Keys
Function
Power( )
Switch between working and standby status.
16:9
Switch the display mode.
MUTE( )
Turn on/off the sound.
Number keys(0~9) Enter numbers or select channel.
List(
)
View program list.
Return to last watching channel.
SOURCE
Select the signal source. (only in TV mode)
MENU
Show the OSD menu.
Cursor keys
Select items or adjust values.
(p ,q ,t ,u )
OK
Confirm the operation.
VOL+/-
Turn up/down the volume.
Return( )
Return to previous page.
EXIT
Exit the current interface
CH+/-
Change program channel.
INFO
Show the information of the TV program.
SUBTITLE
Select subtitle language.
AUDIO
Select audio language.
AD
Turn on/off the associated audio.
TTX
Open teletext mode.
REC
Record programme.
T-Shift
Time shift in DTV mode.
Displays the hidden text in
REVEAL(EPG) teletext mode.(Electronic channel
instructions.)
Displays the index page in
INDEX( )
teletext mode.(Play/pause
function in multimedia)
ZOOM( )
Adjust the teletext size. (Stop function in multimedia)
HOLD( )
Hold the displays at the current page.(Last file in multimedia).
LANGUAGE(
)
Change teletext language. (Next file in multimedia).
Red key
Green key
Special function key
Yellow key
Blue key
77 7
.
Operation
Operation
· Use two AAA batteries for the RC. The RC should be pointed at remote sensor within 8 meters and within 30 degrees at the left or the right side.
· Take the battery out of the RC if it is not used for a long time.
· Do not mix new and used batteries or different types of batteries. Weak batteries can leak and severely damage the RC.
· Do not expose the RC to shock, liquids, and do not place it in an area with high humidity.
CAUTION! Incorrect installation of the batteries may lead to an explosion. Please replace used batteries with the batteries of the same or comparable type.
General operations
Power · Connect the plug of the power cord to the
mains socket and press the POWER button to switch on the TV.
· Do not leave your TV in standby mode for a long period of time; if you are not going to use the unit, disconnect it from power supply.
· In TV mode the unit will automatically go to standby mode if no signal for 5 minutes.
Signal sources Press SOURCE, then press DOWN/UP cursor buttons on the RC or CH+/CH- buttons on the panel to select a source from the list. Press OK button on the RC or MENU button on the panel to confirm. Press EXIT to exit.
Teletext operations (option) Select a TV channel in order to pick up the picture signal of Teletext. Teletext button functions are as follows: TTX: Press this button to enter into TEXT mode. Press the button again to return to the channel you are watching. HOLD: Press this button to stop the move to the next page. Press this button again to cancel operation. INDEX: Press this button to go to the index page. REVEAL: Press this button to reveal the concealed information. Press this button again to conceal the information. Red/Green/Yellow/Blue buttons: Press these 4 color buttons to access directly to corresponding color page displayed at the lower parts of teletext screen.
Operations · Press VOL- button repeatedly to decrease
the volume; press VOL+ button repeatedly to
increase the volume.
· Press MUTE to mute sound, press this button again or increase volume to resume sound.
· Press button on the RC to select from the present channel and the previously dis8played channel.
8 8
Operation
.
Operation
OSD operation
1. Press MENU button to enter the setting menu displayed on the screen.
2. Press LEFT/RIGHT cursor buttons to go to the needed setting page.
3. Press UP/DOWN cursor buttons to select a parameter to adjust.
4. Press LEFT/RIGHT buttons to adjust the selected parameter.
5. Press button to go back or EXIT to exit the menu.
Some menu items may be in grey color, in this case they are not adjustable. Pictures of OSD menu are for reference only; they may differ from the actual menu tabs.
Channel menu
CHANNEL
Auto Tuning DTV Manual Tuning ATV Manual Tuning Programme Edit Hide encoded Signal Information Software Update
· Auto Tuning: press OK buttons to select the country and tune type for channels to start automatic search and saving of available ATV channels. After the search is finished, the unit will proceed to search DTV channels.
· DTV Manual Tuning: Press LEFT/RIGHT cursor buttons to select channel number. Press OK button to start searching. When the nearest available channel is found, the search will stop and the channel will be saved under the selected number. Press MENU button to quit.
· ATV Manual Tuning: Current CH: select channel number. Color System: select corresponding color system. Sound System: select corresponding sound system. Fine-Tune: perform fine adjustment of the current frequency. Search: press LEFT/RIGHT buttons; the unit will search for next available channel downward or upward and save it under the current number.
· Programme Edit: this item allows you to sort TV programs according to your preferences. Enter the program edit menu:
Delete: Select the channel you want to delete. Press red button to delete the channel.
Move (not available for DTV channels with LCN): Highlight the needed channel. Press yellow button; select the position to put the channel into. Press yellow button to confirm.
Favorite: Select the channel you want to edit. If this channel is your favorite channel, you can add it to your favorite channel list by pressing the green button.
Skip: Highlight the needed channel. Press blue button; now this channel will be skipped when you select previous/next channels.
· Hide encoded: hides the encoded (paid) channels.
· Signal Information: View the information on the current signal.
· Software Update: update the TV software using a USB drive (only for experts).
9 9
.
Operation
Operation
Picture menu
PICTURE
Picture Mode Color Temperature Noise Reduction
· Picture Mode: Standard/Mild/Personal/ Dynamic. When Personal mode is selected, you can adjust contrast, brightness, colour, sharpness and tint (in NTSC) of the image.
· Color Temp: Standard/Cold/Warm. · Noise Reduction: Dynamic noise reduction effect for reducing the video noise level. Select the Off/Low/Middle/High/Default mode.
Sound menu
SOUND
Sound Mode Balance Surround Sound SPDIF Output AD Switch
· Sound mode: Standard/Music/Movie/ Sports/Personal. When Personal mode is selected, you can adjust treble and bass.
· Balance: adjust the balance between the left and the right speaker.
· Surround Sound: set the surround sound effect on or off.
· SPDIF Output: Select the digital audio output mode: Auto/PCM/Off.
· AD Switch (in DTV mode): This is an auxiliary audio function that provides an additional audio track for visually challenged persons. This function handles the Audio Stream for the AD (Audio Description), when it is sent along with the Main audio from the broadcaster. Users can turn the Audio Description On or Off and control the volume.
Time menu
TIME
Auto Sync Clock Off Time On Time Sleep Timer Auto Sleep
Time Zone
· Auto Sync: if on, the time will automatically sync with the DTV signal.
· Clock: set the system time if Auto Sync is disabled.
· Off Time: set the time for the TV to switch
off.
· On Time: set the time, channel and
volume for the TV to switch on. The TV must
be in standby for the On-timer to work.
· Sleep Timer: select the period until
automatic switch-off of the unit. · Auto Sleep: select the period after
which the TV turns off automatically if no input is given.
· Time Zone: select your time zone.
10 10
Operation
.
Operation
Option menu
Lock menu
OPTION
OSD Language Audio Language Subtitle Subtitle Language Hearing Impaired PVR File System Recorded List Software Update (USB) Restore Default Environment
LOCK
Lock System Set Password Block Program Parental Guidance
· OSD Language: select the language of the on-screen display (OSD).
· Audio Language: select the language of audio (available for some DTV channels).
· Subtitle/Subtitle Language: toggle subtitles on or off and choose its language (DTV).
· Hearing Impared: When Hearing Impaired is on, the screen will give some information to people whose hearing is impaired. When Off, the information will be hidden.
· PVR File System (in DTV mode): Select Disc: select the storage used for PVR. Time Shift Size: select the time for Time Shift. Format: format the USB. Speed Check: display the speed of the storage.
· Recorded List: view the list of recorded programs.
· Software update (USB): update TV
software using a USB storage device.
· Restore Default: reset the
parameters to initial factory settings.
· Environment: select one of the environment modes:
Store Mode: Demo mode - used by stores to showcase the TV's capabilities.
ECO Mode: Low power consumption mode.
· Lock system: the feature can prevent unauthorized operation of the TV set unless entering a 4-digit password. When Lock System is on and the system is locked, you must input the system password at Auto Tuning, Manual Tuning or Default. Press the right number buttons for the password. The default password is 0000 .
After a password correction has been confirmed, please remember it for entering into the LOCK menu, all functions can not be activated until the correct password is entered.
· Set Password: you can set your private password. Press the number buttons on the remote control to set the new password. When the new password has been put in twice, the setting is finished successfully. The TV will go back to previous menu.
· Block Program (in TV/DTV mode): press Green button to lock the available program you want. Press Green button again to unlock it.
· Parental Guidance: adjust the rating rules for viewing certain channels and programmes.
11 11
.
Operation
Operation
Electronic Programme Guide (in DTV mode)
Press the EPG button to display the Programme Guide menu. This function gives you the detailed information of the channel, indicating the time of the program playing. From the Programme Guide it is possible to check the program information for the next eight days (If the information is available from the broadcaster). Press EXIT button to quit.
· Record: Press Red button to set the parameters of recording, The unit is able to do schedule recording when TV is turning on or in standby mode. You can set up several schedule recording. Different schedules should not overlap. When recording starts in standby mode, the front indicators will change color and there will be no picture or sound from the unit.
You can press the POWER button to light up the screen.
· Info: Press the INFO button to see the detailed information of the current channel.
· Remind: If you find the desired program which will be shown in the future. Press the green button to book program.
Digital program recording Insert a USB, the system will automatically create a folder to store the files recorded. Recording begins when REC button is pressed, and it records all the time until STOP button is pressed or the memory is full.
Please note the following about PVR: · USB storage device must have the capacity of at least 512 MB and support the USB 2.0 standard. Some non-standard storage devices may not be supported · Try formatting the inserted storage device when you have trouble recording.
· Do not disconnect the device while the formatting is in progress. When you format the device, all data on it is deleted. It may be advisable to back up your files before formatting.
· If the USB storage device has several partitions, the PVR system can record the data on any one of them.
TimeShift function TimeShift is a feature enabling you to record an on-air digital TV program. Press the T-Shift button to activate TimeShift. The program is being recorded. You can pause and rewind. Press T-Shift again to resume the program. Press STOP or EXIT to disable TimeShift.
CI Information (only in DTV mode): This function enables you to watch some encrypted services (pay services). Please insert a CI card into the PCMCIA slot according to the arrow on the CI card.
· The function can only be available when CI card is present.
· It is possible for you to change CI
(Common Interface) menu screen and service by consulting your dealer.
· Please do not insert or pull out the CI card when power on. During initialization of the CI card, please don't operate the TV.
· Do not insert or pull out the CI card frequently so as to avoid any damages of the TV and the CI card.
· If there is no picture and/or sound with the CI+ CAM module inserted, please contact the customer support of the service provider.
12
Operation
.
Operation
USB operation
General information · This unit supports playback of video files with AVI, TS, MP4, MKV, MOV extension, with video codecs H264, MPEG2/4 and audio codecs AAC, DD(AC3).
The above list of extensions and codecs is for information only and is not a guarantee that all files having the above extensions and codecs should be read by this unit.
USB file systems supported: FAT32. 2.0 USB version is supported. Maximum capacity 1 TB. For correct and satisfactory operation, licensed USB devices of wellknown brands should be used with this unit. Avoid using USB devices of unknown brands. Playback of photos and music of only JPEG and MP3 format is supported. The output capability of the USB port is 500 mA.
· Some AVI files cannot be played due to their parameters and recording conditions. Video files with AVI extension exceeding 2 GB in size may be played partially.
According to the USB 1.1/2.0 Standard, usage of a USB device with power current consumption exceeding 500 mA is not recommended without supplementary power supply. Failure to use supplementary power for connected USB drives with power consumption exceeding this value as well as defective USB drives may cause mechanical or thermal changes of elements of this unit as well as failure of internal elements of the USB port. Such damages are not warrantee cases.
Warning: usage of external USB drives containing BIN files in the root directory may cause malfunction of the unit or damage to the software.
Operations of file playback · Insert a USB into the USB port. Select USB source and press OK button. The screen will show a USB playback window, in which you can select Movie, Music, Photo and File contents to play by pressing LEFT/RIGHT cursor buttons and OK button. · Press cursor buttons to select Return option and press OK button on the RC if you want to go back to the previous menu. · In the content menu, press cursor buttons to select folder, press OK button on the RC to enter it, then press cursor buttons to select the file you want to watch or to listen to. When highlighting the file, the file information will appear and picture will be previewed (not available for music files). Press PLAY/PAUSE button on the RC to play the selected file.
· While playback, press INFO button; the bottom of the screen will show playback menu in which you can select an operation by LEFT/ RIGHT cursor buttons on the RC or perform this operation by pressing OK button on the RC. Some of the operations are as follows:
Play or pause playback
All files
Select previous file
All files
Select next file
All files
Stop plabyack and return to previous menu
Select repat playback mode
All files All files
Play music in background mode when photo or text file is being browsed (you should select music file first)
Show playlist
Photo and Text
All files
Show file information
All files
Rotate image clockwise
Photo
Rotate image anti-clockwise Photo
13 13
.
General Information
General Information
Rewind
Fast forward
Mute the sound
Select time to start playback from Fragment repeat playback. Press OK to select initial point, press OK to select final point of the fregment Slow playback
Music/ Movie Music/ Movie Music/ Movie Music/ Movie Movie
Movie
Step playback
Movie
Zoom in Zoom out
Movie/ Photo
Movie/ Photo
· While playback, press button to pause
or resume playback. Press button to stop
playback.
· When you select a file to play, you can
delete the selected file by pressing Red button,
then OK on the RC.
· When playing music files you can press
/ buttons to fast reverse or forward. You can
press /
buttons to select the desired files
manually in normal condition.
· When playing text files, you can press LEFT/
RIGHT buttons to page up or page down the file.
14
General Information
.
General Information
Troubleshooting
Below is a table describing simple measures that can help you eliminate most problems likely to emerge when this unit is in use. If below measures do not help, turn to a service center or to the nearest dealer.
Symptom
Cause
Solution
No picture, no sound, and no indicator light
The power cord is not plugged in. Contrast, brightness, color and volume are all in the minimum value or TV is in mute mode.
Plug the power cord in. Alter the value of contrast, brightness, color and volume.
Picture and sound with abnormity
Contrast and color are set improperly. Set the value of Contrast and color
Color system is set improperly.
properly.
Sound system is set improperly.
Set the sound system properly.
The picture in VGA mode is abnormal
The PC settings may be improper.
Check and set the resolution parameters of your PC.
Picture is spotted Signal source is low-grade or the
or with snow
signal is in a lower quality.
Use the qualified signal cord.
Blue background No video signal or the signal cord is Connect the signal cord properly. improperly/not connected.
No sound
No audio signal or the signal cord is improperly/not connected.
Connect the audio signal cord properly. Set the sound system properly.
The RC does not Batteries are improperly installed or
work
exhausted.
Make sure the positive and the negative polarities are correct. Reattach the battery lid. Replace the batteries.
Causes of interference Incorporated in your TV receiver are the most up-to-date devices to eliminate interference. Local radiation however, can create disturbances, which visibly affect your picture. Proper installations, a good aerial are your best safeguards against these disturbances. · RF INTERFERENCE: Moving ripples across the screen are caused by nearby transmitting or receiving short-wave radio equipment. · DIATHERMY: Herringbone pattern and partial picture loss can result from the operation of diathermy equipment from a nearby doctor's surgery or hospital. · SNOW: Weak TV signals from long distant stations result in an instead picture and give the effect of falling snow. An antenna adjustment or antenna amplifier may be needed. · GHOST: Multiple image, caused by TV signals reflected back from surrounding buildings, hills, aircraft, etc. is minimized by correct aerial positioning. · CAR IGNITION: Nearby cars and electrical motors can cause small streaks across the picture or make the picture roll.
15
.
General information
General information
Accessories
1. LED TV 2. Remote controller 3. Battery 4. Stand
Specifications
1 pc 1 pc 2 pcs 2 pcs
5. Screw 6. Instruction manual
Size (diagonal) Response time Resolution Aspect ratio View angle (Horizontal/Vertical) Color system Sound system NICAM Stereo Digital audio output (Optical) AV in USB port HDMI
DVB-T/DVB-T2/DVB-C signal reception PCMCIA slot (CI, CI+ support) Russian and English OSD Progressive scan Digital comb filter
Number of channels Electric shock protection class Nominal voltage range: Unit dimensions: with stand
Net weight
without stand
23.6" (60 cm) 8.5 ms 1366 x 768 16:9 178°/178° PAL, SECAM B/G, DK, I 2 x 4 W
+ + + +
+ + + + +
DTV 400, ATV 199 II ~100240 V; 50 Hz; 549 x 156 x 365 mm 549 x 67 x 327 mm 2.2 kg
2 pcs 1 pc
The LCD panel is a high technology product with many thin film transistors that can give you a fine picture details. Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green, red, black or white, please note that this does not affect the performance of your LCD TV.
Warning: For the sake of improvement, unit specifications may be subject to change without prior notice.
14 16
.
! . , , . .
:
- , , , , "". ;
-
- .
() , .
15 17
.
, . , , .
. , , , .
· , : , , , ; ; ; ; , .
· , .
· , .
· . · , . · -
, , , , .
· , - , .
· , . .
· .
· , . .
· 220 .
· . , .
· , .
16 18
.
.
· , . , , .
· , , , , . , . , .
· , . , , , .
· , . .
· . . .
· , , . .
· ; LED-
( 10 ).
· . , , .
· . , .
· . , , .
· 18 , 2 . .
· .
· . . .
( 5° ) : , .
, , , .
17 19
.
/
VESA ( : 75 75 ). , - ( ). , .
, . - , . .
.
- , " " .
18 20
.
/
75
. 75 .
· RCA.
· HDMI-, HDMI- , HDMI ( ).
· (, 5.1-). ( ).
· ( ) . .
· CI PCMCIA-, .
· . .
19 21
.
1. 2. -
1
-, , , .
· : .
· : .
· .: . · : .
/ ---
/
---
:
( ): USB-, HDMI-2 (ARC), HDMI-1 (MHL), , AV-.
()
( ): , CI,
22
.
POWER ( )
16:9
MUTE ( )
(0-9)
LIST (
)
(
SOURCE
. . . . . .
.
MENU
( ,,, )
OK
VOL+/- (
)
( )
EXIT
CH+/- (
)
INFO
SUBTITLE AUDIO AD TTX REC T-Shift
REVEAL (EPG)
INDEX ( )
ZOOM ( )
HOLD ( )
LANGUAGE ( )
.
, , , , . . . . . . .
. . . . . TimeShift (DTV).
. ( ).
-. ( ).
( ).
. ( ).
. ( ).
.
21 23
.
1. . 2. AAA/1.5V . 3. .
1
2
3
SOURCE, / CH+/CH- , . OK .
· , , 8 30 .
· .
· , , .
! . .
() , . :
TTX: . .
HOLD: , . , .
INDEX: .
REVEAL: . , .
/// :
,
, -
.
· , . POWER, ; .
· VOL-/VOL+ .
· MUTE . .
22
24
.
1. MENU, .
2. / . OK.
3. / , .
4. , .
5. , EXIT, .
, .
DTV ATV
· : OK (ATV). ATV- (DTV).
· DTV: / . OK DTV. DTV , . MENU .
· ATV: : . : . : . :
.
: .
: .
· : : , . , . ( DTV LCN): . ; . ; : , . , . : . ; .
· : () .
· : .
· ( ): .
23 25
.
SPDIF
· : / //. , , , , ( NTSC) .
· : : . : . : .
· :
. ./ ///.
· : / ///. , ().
· : .
· : / .
· SPDIF:
: Auto/PCM/.
· :
( DTV): , , . AD (Audio Description) , , .
24 26
.
OSD PVR (USB)
· : .
· : , .
· : .
· : , . .
· : , .
· : , .
· : .
· OSD: .
· : ( DTV-).
· : ( DTV-) .
· : , .
· PVR ( DTV):
: , .
(TimeShift): .
: : .
· : .
· (USB): USB. !
· : .
· : :
: - , .
: .
25
27
.
, , , .
· : ( , , .) . - 0000.
· : . . .
, .
· ( TV/DTV): , . .
· : , .
28
.
(EPG, DTV)
. GUIDE " ". , . 8 . EXIT.
· : . , . . , , , .
· : INFO .
· : , , .
· . , , .
· , , PVR.
TimeShift TimeShift (" ") - , . T-Shift, TimeShift. . . TShift , . STOP, TimeShift.
USB-, , . REC STOP.
: · USB- 512 USB 2.0. .
·
USB-,
.
27 29
.
c USB
· AVI, TS, MP4, MKV, MOV H264, MPEG2/4 AAC, DD(AC3).
.
· AVI-
, . AVI 2 .
· USB: USB 2.0, 1 ; NTFS, FAT16, FAT32. USB: 5 , 500 . USB . , .
USB 1.1/2.0 USB- 500 . USB-, , , USB , USB-. .
: USB, BIN , .
USB- USB- . MENU, USB OK. USB, / OK.
· «» OK.
( )
28 30
.
/
/
() /
. OK ; OK
/
/
· , ;
, OK .
· . .
· , - REPEAT .
· / . / .
· / .
29 31
.
, , , . , .
,
«» VGA
. , , , . . . . . . AV / . / .
.
. , , , .
. .
. . , (AV ). . . . , . .
32
.
, , . .
1.
1
2. 1
3.
2
4.
2
5.
2
6.
1
· . · «» . · «» , , « ». . · , , , . , . · .
30 33
.
() (/) NICAM (CVBS) USB- HDMI-
DVB-T/DVB-T2/DVB-C
PCMCIA ( CI, CI+) «»
23,6" (60 ) 8,5 1366 x 768 16:9 178°/178° PAL, SECAM B/G, DK, I 2 x 4 + + +
+
+
+ + + + + DTV 400, ATV 199 II
~100240 ; 50 ; 549 x 156 x 365 549 x 67 x 327 2,2
5 40° 20 80% 750 . . ± 10%
-20 55° 20% 80% 750 . . ± 15%
- , , . , (, , , ). .
- . .
34
.
5 15150 10 ° . 1 15150 , . , . .
, .
, . , , 2002/96/. . . . .
( ), , .
TF-LED24S80T2_T-0254_IM_01
35
.
-
-
-
-
- -
- -
..
-
-
- -9
551
-
- TV
. .17 462421, , , ,
25 664075, . , . , . 236/8
610001, ., -. 118 360051, . , . 24 53915 . 14
302030, . , . , . 1 308015 ., .,22
, 119, . 2 164501. ., . , .
, . 3, . 106 420044, . . , . 38 . 108
398032, , 66
603009, .., .,23 194100,-, .,.4 654080,., - , 25 462407, ., . , . , .
11 163000, . , 21 656043,.,. 113 236022, . , . , 51 450078, ., , .59 - .3 614113, ., . , .84. 394088,.,. ,.13,.1 644011, . , . , .3 660125, , ., 2 . . . 90
300000, ., . .28 392014, . , . , .67 .
8313 25-82-83,25-40-66
(3537) 338443
8(3952)925955 (8332) 54-20-64, 54-69-56 (8662)420430, (8662)420454
(8617)631115,630395 (4862)551506 (4722) 255-777
7(473)262 27 89, +7(473)262 26 60
(8184) 58-72-21
(843) 248-71-17, 259-48-47 4742-370636-104 (108) , 88001000448
8(831) 243-06-06, 243-06-26 (812)295-31-96
8 923-465-5454, 8(3843) 45-69-91
8 3537 20 60 70; 8800 555 34 94
8182204030 3852-639402 (4012) 934-544 (347)228-17-10 8(499)168-05-19 8(499)168-47-15_ (342) 2506-506, (342) 282-73-49 +7(473)2647272 (3812)76-40-83 8-391-277-29-81 8903-411-74-35 / 7861-274-45-24 8(4872)355-399 (4752) 73-94-01
652811, ., . , . , 23 +7(951) 164-0606 +7(38471) 4-21-27
634041,., . , .101 160002, . , . , . 6
41
(3822)432758,(3822)433589 8-911-048-07-72
8422364335 ,8422364331
-
445054,.,.,.12
8(8482)260595, 8(8482)480777, 8(8482)515792
- +
- -
600020, . , , 23, 8(4922)47-46-40; 47-46-41; 33-10-79;
1
42-02-09
630003, . , . , 2
73833495670
. , . 36-
(4712) 50-85-90
424006,,.-,.,173
(8362)457368,417743
155800 . . .8
8(49331)56985
620109, .,., .18 295053, / 2872, . , ,.
, 21 680042, ., . , . 165 690001, . ., . , . 108 (
. )
8 (343) 290-13-94 7(978)0662401 8(4212) 72-43-32 8(423) 2-695-695
.
--
--
-
-
- -
"
644024, ., . , 45 214000, . , . , . 19 344113, .--, ., 43
394030, . .1
173025, . , . , . 23
(3812)55-99-96 (4812) 403-600 8(863)230-31-31
4 732 026 670
8 (8162) 611 200, 946 952
-
440061, . , . 17
8(8412)422726, 8(8412)940445
-
-
-
-.
, . .2 350001 . . 152 432017, . , . , .59 357551, ,1- 32, .4 625023 ., . . 169/5 : 426076, ., . , .136, : 426076, ., . , .136; : 426039, .,
. , .302
. , ., . 69/2
. , . , 17/1
454008, .,. 8 656002, , -. , . 111 180016, ., ., ., .16, 1 .
(8412)564507 8-928-407-99-94 / 8-861-239-77-61
(960)3721961 (8793) 33-17-29, 39-48-40
(3452) 20-82-65
(3412)655-644
8(831)3281146 8(831)3218630 8(831)3280666 8(831)2939620 8(831)2566818
. 3512393939, 88003335556
(3852) 240603, 240335 8-953-243-66-99
-
, . , .37, 11.
(8652) 55-17-48, +79187858429
- -
-
-
-
455049, ., . .5
125121 ., . , .2, .9
625006 . , . 11/7 460044 . , . , .4
344019, .--,.,.7 241007, . , . . 75, . IV 630032, , ., 60 , 392000, ., .., .2 , . , . 63
400066 , , 15
443020 . . 100/ 56 428003 . . .1 .1
664081, ., . , 156 ( ) 430005, ., ., 38
623406, . - ., . 33
620137, . , ,53
8(3519)43-80-15 (925)1462423, (916)6887281
(916)6887281 3452495005 (3532)66-30-66 (863) 299-0050 (4832)40-50-50 8(962)824-1498, 8(913)382-0950 (4752)-451615/537211 +7(3902)32-63-32 8442 600104 89627600104; 890938000025 9903751, 2409817 8352623149 (3952) 42-66-27, 53-41-66; +79025784429 8 (834-2) 30-77-55
3439-399520
7(343)2706075
-
-
-
-
-
-
167004 , . , . , 25
(8212)291220
670033 .-, . .138
8(3012)409646 8(3012)409645
410008 . . . . 95 423815 .20
153012, . , . , . 44 150057 . . 11
630015, ., . , 40, .40 414024, ., . , 13
(8452)52-84-58,52-84-72,52-84-73 88552-35-90-02, 35-90-42 +7 (4932) 30 06 05
8(4852)93-40-60, +7(902)333-40-60 8(383)383-09-73 (8512) 238-310
305001, . , . , .17
309511, .. ,. .7 56,
660020,,. 7 ., . ,.302
183032 ., . , .3 433505, ., . , .
, . 63 420034, . , . , .1, .153,
.242
4712-54-74-24, 4712-54-74-23, 471254-74-25
84725424100 8(4912)50-40-40 8(391) 293-54-33, 89535934033
83512110084 (8152) 255-263, (8152) 255-262
8(84235) 2-86-59, 9-14-64
(843) 207-12-13
170036, . , . , .35, 1, . 026
(4822)34-13-18, (4822)34-13-22
CI_TF_07
.
:
1. 12 () . 2. . 3. ,
. 4. ,
« » . 5. . 6. : , ,
, , . 7. :
- (, ), , ; - , (, , , Java ); - (), , , () , / . - / .
, www.telefunken-electronics.ru QR- ( ).
.
.
.
Adobe InDesign CC 2014 (Windows) 3-Heights(TM) PDF Optimization Shell 5.9.1.5 (http://www -tools.com)