EU Declaration of Conformity

Manufacturer

Producer: Impakt S.A.

Address: Stanisława Lema 16 street, 62-050 Mosina, Poland

Website: www.impakt.com.pl

Product

Name: PC CASE NATEC HELIX

Model: NPC-2038; NPC-2171

Batch Number: NOT SPECIFIED

Compliance Statement

Impakt S.A. hereby declares, on its own responsibility, that the following products are compliant with the essential requirements and other applicable provisions of the directives.

Applicable Directives and Standards

RoHS (2011/65/EU + 2015/863/EU): Directive of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Applied Standards: EN 62321-4:2014; EN 62321-5:2014; EN 62321-6:2015; EN 62321-7-1:2015; EN 62321-7-2:2017; EN 62321-8:2017

EMC (2014/30/EU): Directive of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the member states relating to electromagnetic compatibility.
Applied Standards: EN 55035:2017 + A11:2020; EN 55032:2015 + A1:2020 + A11:2020; EN 61000-3-3:2013 + A1:2019 + A2:2021; EN IEC 61000-3-2:2019

Authorized Signatory

Person authorized to issue EU declaration of conformity: Dominik Majchrowski

Title: Product Development Department Director

Signature: D. Majchrowski

Further Information

Before using this declaration, make sure that no newer version has been published on the manufacturer's product page: www.natec-zone.com